WELCOME MAINT MD ACCN PERIODICAL SERVICES AND PETTY REPAIR AND CERTAIN INTERNAL EM WORKS AT MD AND OTM ACCN AT R AND DE E DIGHI PUNE

Amount

B/R PORTION Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded & removing serviceable tiles to store and rubbies of the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm (below or above ground level) complete all as specified and directed.

Demolition of cement concrete in above ground floors and pavings exc 15 cm thickness complete all as specified and directed.

M&L of 25mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed.

M&L for Double charged Vitrified ceramic tiles as in flooring and skirting of Light shade 9 to 10mm thick (square / rectangular) polished area of each tiles size exc 0.11 sqm but N exc 0.36 sqm, 9 to 10 mm thick in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Coloured Non Skid ceramic tiles 07 to 08 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 450/ 600x300 mm, 08 to 10 mm thickness as per manufacture (With two borders and mothiff pattern) / High lighter tiles on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl a backing coat including dubbing out coat to an average thickness of 10 mm thick in CM (1:6), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed.

Ditto- but exceeding 1.5 Sqm but not exceeding 4 Sqm each. ( Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified and directed.

S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stylies and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stylie & rails with sutailble PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in oppining complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Aluminium, anodised barrel tower bolt 150 mm complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specified and directed.

S&F Aluminium handles fabricated type 150 mm complete all as specified and directed.

S&F Aluminium handles fabricated type 100 mm complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Mild steel cold rolled Butt hings 100 mm medium weight complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified and directed. Note : Fitting weight should not be added for arriving quantities in Kg .

S&F anodised aluminium window shutter shutter sliding type without sash bar, aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws, rollers, locks complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and M&L for sheet glass ordinary quality 3 mm thick fix in window/vent shutter area n exc 0.50SqM in each pane complete all as specified and directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed.

S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed 300 mm complete all as specified and directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets and fixed in position using stainless steel screws complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.

S&F in repairs stainles steel sink coupling with stainless jali complete all as specified and directed.

S&F in repairs Internal flushing cistern kit complete all as specified and directed.

S&F in repair brass half turn spindle complete all as specified and directed.

S&F in repairs 450mm x 600mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc complete all as specified and directed.

S&F in repairs PVC flexiable waste pipe for sink and wash basin complete all as specified and directed.

M&L for rendering 15 mm thick in cement motor 1:3 with using water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately complete all as specified and directed.

M&L applying coat of industrial bitumen 85/25 at the rate of 1.20 kg/sqm including cleaning the existing plaster/concrete surfaces of sunken portion complete all as specified and directed.

M&L for PCC 1:5:10 type E2 as in filling under floor complete all as specified and directed.

Material and labour in repair for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including noising and rounding edges of stone slab and complete all as specified and directed.

M&L in repair for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillers, window cills, cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade including noising and rounding edges of stone slab complete all as specified and directed.

M&L in repair for Machine cut cudappa stone slab as in horizontal or vertical 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and noising and rounding edges of stone slab complete all as specified and directed.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm bore, 60 cm long PTMT connecting pipe fitted with unions to connect iron pipe to PVC pipe on both ends complete all as specified and directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, chromium plated for iron pipe or for unions angle cock complete all as specified and directed.

S&F in repairs plastic water closet seat, white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, fancy type cast copper ally chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15 mm bore three in one Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed.

S&F in repairs, vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete all as specified and directed.

S&F in repairs sink made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.

S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets,cp couplings, pvc waste pipes etc. complete all as specified and directed.

S&F in repair for vitreous China wash basin, white,counter type, size 550 x 425 x 180mm including necessary brackets,CP couplings, waste pipes etc. complete all as specified and directed.

S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20mm bore pipe complete all as specified and directed.

S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Removing of debries (Concrete debries, tiles etc) where directed out side the MD Land (R&DE Dighi) Camp area complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed.

Taking down cement plaster from brick / concrete/ stone surfaces including racking out joint, hacking for key and scrubing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of any description in CM 1:6 and finishing the surface with Sagol Finish, complete all as specified and directed.

M&L rendering 10mm thick in cm 1:4 on brick or concrete of any description finished even and fair without using extra cement and using water proofing compound etc all as specified and directed. Note: WPC will be measured and paid seperately complete all as specified and directed.

M&L for Rendering 20mm thick in two coats on fair faces of stone masonry surfaces in CM 1:4 using WPC on second layer all as specified and directed. Note: WPC shall be measured and paid seperatly complete all as specified and directed.

M&L for Rendering 20mm thick in two coats on fair faces of stone masonry surfaces in CM 1:6 (sagol finish) complete all as specified and directed.

Taking down old cement plaster from ceiling concrete surface, scubbing down with water etc, and plastering 5mm thick in CM 1:3 complete all as specified and directed.

M&L for preparation of newly cement plastered wall surface and applying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering and a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surface of wall, applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and directed.

M & L for Preparation of newly plastered surface of wall, applying two coats of cement based paint over a coat of exterior primer after preparation of surfaces at any height including necessary scafolding etccomplete all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash on walls complete all as specified and directed.

M&L for Complete removal of existing treatment including Washing, rubbing down and stopping etc. and applying two coats white wash on walls complete all as specified and directed.

All as per Item here in before but on ceiling surfaces complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall and ceiling applying one coat of oil bound distemper etc complete all as specified and directed.

M&L for Preparation of old distempered surfaces of wall and celing and applying two coat of oil bound distemper complete all as specified and directed.

M&L for Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer including wall care putty to make surface even and smooth, preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed.

M&L for Preparation of old painted surfaces of wall/ceiling and applying one coat of Luster paint complete all as specified and directed.

M&L for Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and Two coats of Lustre paint over a coat of primer including one coat wall care putty preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed.

M & L for one coat of cement base paint on walls incl, preparation of old decorated surfaces complete all as specified and directed.

M&L for Preparation of old plaster surface of walls and applying two coats of cement base paint etc complete all as specified and directed.

M & L for one coat of weather proof exterior paint on walls incl, preparation of old decorated surfaces complete all as specified and directed.

M&L for Complete removal of existing treatment on wall surfaces, fins, fascias etc by scrubing, sand papering and applying two coats of weather proof exterior paint (Apex ultima or Dulux or equivalent) white or tinted over a coat of acrylic exterior primer incl nescessary scafolding complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and directed.

M&L for preparation of old concrete surface/kerb stone of any description exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified and directed.

M&L for 20mm thick (in two layers 10mm thick of each layer) Polymer modified mortor over concrete surfaces and making the surface even and smooth to receive further tretment, including necessary scaffolding complete all as specified and directed.

E/M PORTION Taking down carefully Copper/ aluminium point wiring light, Fan, socket or power complete including fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc complete all as specified and directed.

Taking down carefully unserviceable sub main wiring/PVC cable including conduit/casing patti etc complete all as specified and directed.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as specified and directed.

Taking down unserviceable MCB SP/SPN/Isolator/MCCB/RCCBs of any rating & size complete all as specified and directed.

M &L for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100V, FRLS grade with multistranded copper conductor ISI marked drawn through with and including PVC casing & capping fixed on surface wall/ceiling and including modular cover plates and modular flush boxes for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making good the distributed surfacess completely matched and finished with existing surfacess complete all as specified and directed. (a) One light point controlled by one 5 Amps one way switch.

(b) One light point controlled by two way switch

(c) One ceiling Fan, Exhaust Fan point controlled by one 5 Amps switch.

(d) One bell/buzzer point controlled by one bell push button on independent board.

(e) One 3 Pin 6 Amps socket point on the independent board.

(f) One 3 pin 6 Amp socket point on the same board with other switch.

All as per above item herein above but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor as earthing continuity conductor complete all as specified and directed.

M&L for Cutting chases ,pinning in making good to facing where required and pointing in cement motar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc.and cutting hases for concealed water tubing or concealed water tubing or concealed conduit wiring,etc.and making good cutting exceeding 10cm girth complete all as specified and directed.

M &L for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through with and including PVC Conduit recess/surface fixed modular cover plates and modular flush boxes for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulted unsheathed cable multistranded with copper conductor and connecting to earth dolly for light, fan, plug and bell and making good the distributed surfacess completely matched and finished with existing surfacess complete all as specified and directed. (a) One light point controlled by one 6 Amps one way switch

(b) One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

(c) One bell/buzzer point controlled by one bell push button on independent.

(d) One light point controlled by 2 Nos ,6 amps Two way switch.

(e) One 3 pin socket out let 6 Amp point on independent board

(f) One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor as earthing continuity conductor complete all as specified and directed.

Supply and fixing switch piano flush type, single pole one way 5 Amps complete all as specified and directed.

Supply and fixing switch piano flush type, single pole two way 5 Amps complete all as specified and directed.

Supply and fixing Bell push flush type SP 5 Amps complete all as specified and directed.

Supply and fixing switch socket combination out let 5 pin 6 Amps flush type complete all as specified and directed.

Supply and fixing switch socket combination 2 in 1, 5 and 16 Amps flush type complete all as specified and directed.

Supply and fixing modular switch 6 Amps complete all as specified and directed.

Supply and fixing modular switch 6 Amps 2 way complete all as specified and directed.

Supply and fixing modular switch 16 Amps complete all as specified and directed.

Supply and fixing Bell push modular type SP 6 Amps complete all as specified and directed.

Supply and fixing socket combination out let 2/3 pin 6 Amps modular type complete all as specified and directed.

Supply and fixing switch socket out let 2 / 3 pin 6 and 16 Amps 2 modular type complete all as specified and directed.

Supply and fixing in repair ceiling rose, 3 phase, PVC polycarbonate, insulated body acomplete all as specified and directed.

Supply and fix in repair fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as specified and directed.

Supply and fix in repair call bell (Ding Dong) 240 V, 50 Hz complete all as specified and directed.

M&L for lamp holder pendant/angle type insulated body with back plate complete all as specified and directed.

Supply and fixing in replacement of existing unserviceable T/L fitting 36/40 W on existing wall with new 18/20 Watts LED plastic Batten (white / warm white as directed) with acrylic cover sleek design & high efficency for wall and surface mounted applicaiton with necessary braket, clamps, incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed.

Supply and fix in repair LED tube light fittings1 x 20 Watt, (regal type) 220 V, AC decorative box type with driver holder including LED tube rod with batten connecting up with three core flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing in repair LED Rod tube light 18/20 watts (white / warm white as directed) with necessary fixing arrangement etc complete all as specifed and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing in repair of surface mounting round downlight LED 12 watt luminarie (white / warm white as directed) complete fitting with all fixing arrangement complete all as specified and directed.

S&Fix in repair LED Decorative wall Light fitting, 9 watt, 230 volts, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair Building/street security LED light fittings of Cap 35 W 230V AC outdoor type with high pressure,corrosion resistant suitable for new generation energy saving and environmental friendly long life, light madeup of pressure diecast aluminium housing with highly efficient LEDs as lighting source and pc cover with integrated lens with IP66 protection and impact resistance of IK07 complete all as specified and directed.

S&F in repairs of Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and directed.

Supply and fix in repairs modular White cover plate with frame, 1 module complete all as specified and directed.

Supply and fix in repairs modular white cover plate with frame but 2 module complete all as specified and directed.

Supply and fix in repairs modular white cover plate with frame but 3 module complete all as specified and directed.

Supply and fix in repairs modular white cover plate with frame but 4 module complete all as specified and directed.

Supply and fix in repairs modular white cover plate with frame but 6 module complete all as specified and directed.

Supply and fix in repairs modular white cover plate with frame but 8 module complete all as specified and directed.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable, multistranded on the surface recess through with and including suitable size of PVC casing and capping/PVC conduit with its accessories complete all as specified and directed for the following (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire.

(b) 2x2.5 sq mm and 1x1.5 sq mm as earth wire.

(c) 2x4.0 sq mm and 1x2.5sq mm as earth wire.

Supply & fix MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable Capacity for MCCB as incommer and MCB as out going, 415 volt 3 phase complete with appropriate size copper bus bar and neutral link complete including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F MCB single pole (SP) 240 volt 06-40 amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

S & F MCB single pole and neutral (SPN) 240 volt 06-40 amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

S & F MCB Tripple pole and Neutral (TPN) 415 volt 16 to 32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

S & Fix MCB Triple pole and Neutral (TPN) 415 volts, 40 to 100 Amps, complete all as specified and directed.

Supply and fixing Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCB with 240 V 20 AMPs complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and directed.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia complete all as specified and directed.

Supply and fix Double pole 30 mA RCCBs 25A for earth leakage protection complete all as specified and directed.

Supply and fix Double pole 30 mA RCCBs 40A for earth leakage protection complete all as specified and directed.

Shri Sant Cosntruction (BID ID -3446819)

M/s Mangesh Nikam (BID ID -3444917)

vishalconstruction (BID ID -3444022)

M/S K.D.MATE (BID ID -3446792)

VP DEVELOPERS AND CONTRACTOR (BID ID -3445874)

BSK Construction (BID ID -3446472)

Mukund Engineers and Contractors (BID ID -3443436)