Estimate for Repairing of Electrical work, Painting work, Sanitary work of Bathroom and Wood work of Canal Rest House, Teona.

Amount

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES.

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20 Amp. power plug control point

PVC insulated FR Copper conductor cables

Overall size 4 sq.mm (Un-sheathed)

Overall size 2.5 sq.mm (Un-sheathed)

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required.

PVC Flexible Pipe 20mm dia.

MINIATURE CIRCUIT BREAKERS

MCB Single Pole 6 - 32 amp. (10 kA, Curve-C)

MCB Double Pole 50, 63 amp. (10 kA, Curve- C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's.

P&N Double Door Distribution Board 12 way each

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats).

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade.

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Providing and fixing hession cloth ceiling.

Renewing glass panes and refixing existing wooden fillets.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (Triple layer )

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

G.I. tank nipple 25 mm i/d

G.I. tank nipple 32 mm i/d

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long PVC pipe.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.Pbrass screws complete in all respect.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (C.P brass towel ring)

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge).

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin- charge)complete in all respect.

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge).

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.

Red meranti Normal (15 to 16 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position.

Wire Gauge Golden Champ wood door shutter without springs housed in chowkhat.

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete in all respect.

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm (17.22 iii)

Tailoring of curtains.

Providing and fixing curtain rail 1.90cm chrome-plated with end bracket. Including sockets and brackets.

Providing and fixing steel rings chromeplated 3.80 cm. dia. for curtains. (Market Rate)

Providing & fixing 4" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

THE GIDDERBAHA CO OP L and C SOCIETY LTD.