BARC(T)/NRB/INRPC/ELE-48/2024

Amount

Supply, Installation, Testing and Commissioning of following configuration 415V, 3-phase, 4 wire, Pre-wired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised GI sheet steel, powder coated with RAL7032 shade, suitable for surface mounting complete with earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications

TPN MCB DB with Incomer of 25A, Isc=10kA, Type C, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

TPN MCB DB with Incomer of 40A, Isc=10kA, Type C, (100mA) RCBO for each phase and 24 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

TPN MCB DB with Incomer of 25A, Isc=10kA, Type C, (100mA) RCBO for each phase and 24 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

Supply, Installation, Testing and Commissioning of following configuration 240V, 1-phase, 2 wire, Prewired with HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Pre Galvanised G. I sheet steel, powder coated with RAL7032 shade, suitable for surface mounting complete with earth bar, din bar for MCB mounting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes, neoprene gasket, check-nuts etc. as required as per SLD and technical specifications

DP MCB DB with Incomer of 40A, Isc=10kA, Type C and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

DP MCB DB with Incomer of 25A, Isc=10kA, Type C and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

DP MCB DB with Incomer of 25A, Isc=10kA, Type C and 8 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

DP MCB DB with Incomer of 6A, Isc=10kA, Type C and 6 nos. of 2A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

DP MCB DB with Incomer of 25A, Isc=10kA, Type C and 4 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification

Supply

Installation

Supply, Installation, Testing and Commissioning of LED light fittings complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per technical specification

4ft Batten with 2x18 W LED Tube with a nominal system lumen output of 2100 lumens per LED tube and a minimum system efficacy not less than 115 lm/W per LED tube. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.9. The batten luminaire housing should made of white powder coated CRCA sheet steel. The total power consumption should not exceed 38W (including driver)

Supply

Installation

LED 4ft Slim Batten with a nominal system lumen output of 2100 lumens and a minimum system efficacy of 115 lm/W.The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 protection rating with THD < 10% and PF > 0.9. The luminaire housing should made of Extruded Aluminium with extruded PC diffuser & should have anodised finish. The total power consumption should not exceed 19W (including driver)

Supply

Installation

19 Watt LED Batten having system efficacy 115 lm/W, system output 2100 lumens, THD < 10%, Power Factor > 0.9, CRI > 80, CCT 6500, CRCA Powdered coated housing and IP65 protection

Supply

Installation

15 Watt LED Mirror optic fitting with a nominal system output 1600 lumens and a minimum system efficacy of not less than 115 lm/W. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP20 rating with THD < 10% and PF >0.9. The luminaire housing should be made of polycarbonate with high efficiency diffuser

Supply

Installation

32 Watt Recessed 2ft x 2ft LED luminaire with nominal system output 4000 lumens and having system efficacy > 115 lm/W, THD < 10%, Power Factor > 0.95, CRI >80, CCT 6500K, CRCA housing with PS diffuer and IP20 protection

Supply

Installation

80 Watt LED Lowbay light of wide angle not less than 90 degree with a nominal system lumen output of min 10300 lumens and a minimum system efficacy of 130 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI > 80 and SDCM < 5. The luminaire shall meet IP65 and IK 08 rating with THD < 10% and PF > 0.95 and in-built surge protection of 4kV. The luminaire should be tested from NABL accredated LAB and should have proper IES file. The luminaire housing should be made of High Pressure die cast Aluminium having gasket of heat proof silicone rubber ring

Supply

Installation

34 Watt LED wellglass peripheral luminaire with a nominal system lumen output 3700 lumens and a minimum system efficacy 120 lumen/watt. The luminaire should have CCT 4000K, CRI > 80 with Opal di„ffuser in polycarbonate cover. The luminaire shall meet IP65, IK 08 rating with THD < 10%, PF > 0.95 and SDCM<5. The luminaire housing should be made of pressure die cast aluminium

Supply

Installation

6.5 Watt LED Bulkhead fitting with nominal system lumen output of 700 lumens and a minimum system efficacy of 105 lm/W. The luminaire should have CCT 6500K and CRI > 80. The luminaire shall meet IP65 rating and IK 08 rating PF > 0.9. The luminaire housing should made of High pressure die cast Aluminium with high quality PMMA diffuser

Supply

Installation

72 Watt LED Flood light for Outdoor Lighting having housing of high pressure Die cast Aluminium, Lumen ≥ 10000, Efficacy > 110 lm/W, CRI ≥ 70, CCT - 5700 K, PF ≥ 0.95, THD < 10%, IP65 protection and Surge protection upto minimum 4 KV

Supply

Installation

Supply and Installation of 415V 400A LT AC PDB double door Panel and various outgoing feeder, fabricated of GI Sheet steel with SDF units complete as per technical specifications sheet and drawings

Supply

Installation

Supply and Installation of the following Industrial switches/MCB with face plate (in the existing recess mounted GI Box) and Decorative switches with polycarbonate Box and face plate as per Technical specification

1 nos. of 6A, Single Pole, Isc=10kA, Type C-Curve, Industrial Switch/ MCB along with pre- Galvanised powder coated GI sheet steel Face Plate and suitable DIN rail and mounting arrangements as per technical specification

Supply

Installation

1 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification

Supply

Installation

Supply and Installation of the following MCB/ Industrial switches and plug sockets with suitable plug tops (3-pin) in the exisitng recess mounted GI Box and 3 pin domestic plug sockets with suitable polycarbonate Box, face plate, switch and plug tops as per Technical specifications

1 nos. of 6A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB along with pre- powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification

Supply

Installation

1 nos. of 6A and 1 nos. of 16A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangementsas per technical specification

Supply

Installation

1 nos. of 6A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification

Supply

Installation

1 no of 6A and 1 no of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification

Supply

Installation

Supply and surface conduiting of 14 SWG black enamelled heavy duty rigid GI conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, drawing of fish wire . as required under the instruction of Engineer-in-in charge

Supply

Installation

Supply and laying of 14 SWG tinned solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required

Supply

Installation

Supply of Single Core HFFR PVC insulated wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification

Installation/drawing through concealed/ surface conduit and wiring and termination at both ends of Single Core HFFR/ FRLS PVC wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V ) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification

Supply, Installation, Testing and Commissioning of 100 KVA DG Set with AMF Panel and complete accessories as per technical specifications

Vertical air termination made up of 20mm dia, 1 mtr long copper rod attached to 50mm dia. Copper sphere having drilled and tapped holes for fixing 5 nos. of 150mm long spikes

Supply

Installation

Test link box for interconnection of downconductor from lightning protection system to lightning earth pit and should consist of 2mm thick pregalvanised GI sheet, weather proof sheet enclosure with cover, having 25mm x 3mm copper strip link, teflon sealing after connection, earthing stud, etc as reqired

Supply

Installation

Supply & surface monting of EPABX Main Junction Box(MJB) with 20 Pair KRONE block suitable for connection of 0.9 mm dia. wire with insertion tool mounted in suitable size enclosure

Supply

Installation

Supply & installation of Pre-fabricated GI box to accomodate modular type RJ11 socket unit suitable for surface mounting

Supply

Installation

Supply & installation of Front plate with modular type RJ11 socket unit

Supply

Installation

Supply & installation of RJ11 patch cord

Supply

Installation

Supply & Installation of Power Cables 2XWY, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 type), of 1.1 kV grade as per IS 7098 (part - 1) 1988

4 core X 4 sqmm

Supply

Installation

2 core X 16 sqmm

Supply

Installation

Supply, Installation and Commissioning of Copper Earth Plate 600 mm x 600 mm x 3.15 mm thick of high grade quality including accessories and providing civil masonry pit and enclosure with GI cover plate having locking arrangement and watering pipe of 2.7 metre length with charcoal / coke and salt as per IS 3043 standard as per attached technical specification

Supply

Installation

Supply and laying of 95 sq. mm Class-2 stranded tinned ETP grade copper conductor in RCC trench/ underground upto depth of 1 meter, connection with earth pit at one end and conductor tail at other end, including clamping, brazing, connection etc. as per instructions by Engineer-In-Charge

Supply

Installation

3C x 1.5 sqmm Copper conductor, multistranded, HFFR PVC insulated Unarmoured flexible cable with laying, dressing and installation on surface including clamping/cleating on structure/floor/ceiling/wall/tray making chase and repairing as required, bolting etc. as per instructions of EIC

Supply

Installation

Supply of spares, tools and tackles etc. for O&M of 33 kV Substation as detailed in technical specification

Supply of petroleum jelly, ISI certified for application on electrical contacts

Supply of fresh blue coloured silica gel for Transformers as per technical specification

Supply of 415 V AC, 50 Hz, 3 Pole Contactor for capacitor switching of various ratings listed below and as per technical specifications

Contactor for 25 KVAr capacitor switching

Contactor for 50 KVAr capacitor switching

Contactor for 100 KVAr capacitor switching

Supply of Bakelite sheet of insulation level 36 KV of size 2.5* 2.5 Feet as per technical specifications

Supply of handheld Metal detector for detecting ferrous and non-ferrous metals as per technical specifications

Supply of 100A, 415V AC MCCB of maximum short circuit breaking current capacity of 36kA and as per technical specifications

EVERCREST PROJECTS PVT LTD.

Kalpataru

Yogiraj Powertech Pvt Ltd.

Moon Light

SARASWAT ENGINEERING SERVICES