PROVISION OF PCC PATH AND SPECIAL REPAIR TO BATHROOM OF FIRE SECTION INCLUDING REVENUE AND MINOR WORKS AT SONEGAON NAGPUR

Amount

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter without taking of shutter from framed complete incl removing from site

Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Hacking out old broken glass( any thickness size quality or description) from wooden frames glazed with putty or fixed with beads.

Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site

All as item No 06 above but for 20 mm dia bore pipe

Excavating in post holes or similar holes each n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil,material to a distance n.exc 50 m and making good surface.

M & L for PCC 1:2:4 type B-2 in 40 mm graded aggregate in foundation filling and masconcrete as directed by Engineer-in-Charge.

M&L for 15 mm thick rendering in CM (1:4) on brick/concrete surface finished even & smooth without using extra cement complete all as specified and directed at site.

M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cm(1:6) finished even and smooth without using extra cement complete

S&F galvanised steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as directed at site.

M&L Steel ventilator with top hung shutter including hinges steel peg stay. Complete.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .

S & F mild steel medium weight could rolled butt hinge 100mm size.

S & F Aluminium Handle of 150mm size cast type anodised

Aluminium anodised, barrel tower bolts of extruded section and fixed (150mm long)

S&F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black,300mm with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheetys for top rail, lock rail & bottom rail for stiles and plain colour PVC sheetys for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gether with solvent cement, fix in frame as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

M&L for coloured glazed ceramic tiles in vertical surface 300x200x6 to7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces.

S&F in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe and waste pipe)including PVC waiste pipe 1 m long complete all as specified and directed.

S&F in vitrious china wash basin, white flat back size 630x450mm including waste, chain & plug andporeclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed at site.

S & F PVC flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle, including bracket and 38mm dia flush pipe of polyethylene for low level cistern complete all as specified and as directed

M&L machine cut cudappah stone slab 20-25 mm thick over 15 mm thick cement screed base laid & jointed with gray cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete.

S&F granite of any type tiles 20mm thick in steps,cooking platforms,and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and directed.

S&F PVC connection 15mm bore dia 450mm long with PTMT nut

S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 20 mm bore pipe.

All as per item No 32 here-in-before -ditto- but 15 mm bore.

S&F 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge

S&F 15mm dia angle stop valves cast copper alloy feney type,chromium plated complete

S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed

S&F in repair, 15mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule.

S&F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and direcetd

S&F in repir15 mm dia pillar taps, cast copper alloy fency type with capstan heads chromium plated secrewed down, high pressure with or without lettered "Hot or Cold with long sereuled shanks and fly nuts sereuled for iron pipe and fixed all as directed

S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed

M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in cover slab, shelves Chhajja and similar work set in CM (1:4).

S&F 75 mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement.

M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall

M&L PVC (SWR) bend any radius 110mm dia

M&L PVC(SWR) Tee any radius 110mm dia

S&F PVC(SWR) P trap of 110mm dia

M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall

M&L PVC (SWR) bend any radius 75mm dia

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep and n.exc 1.5Mt wide and getting out in soft/loose soil complete all as specified.

Removing excavated material exc 250 mtr n exc 500 m distance and depositing where directed at a level n exc 1.5 M above the starting point complete all as specified and directed.

M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base.

M&L 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate)in floors finish concrete surface even and smooth without using extra cement.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering.

M&L for hardcore of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface.

S&F 110mm dia bore PVC soil pipes in any length.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Excavating in post holes or similar holes each n.exc 0.5 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil,material to a distance n.exc 50 m and making good surface.

M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer in charge.

S & F Splite AC 1.5 TR capacity not less than 5star rating,out door unit installed on 2No angle iron anchor pickets with nut bolts arrangement & inner unit of A/C in side the room wall surface with suitable space for further maintenance including necessary gas charging / topping up with soldering of copper tubes including exposed nitrile ruber and refrigerent piping & proper saddling , clamping & covering all as directed by Enger-in-charge.Make-Blue Star/LG/Daikin

M &L for PVC surface conduit sub main wiring with 02run of 06 square mm nominal area stranded copper conductor single core PVC insulated ,PVC sheatheated cable1000 Volts grade draw in PVC conduit including 1000volts grade 4 square mm copper stranded single core cable PVC insulated for contineuous earthing wire with complete ,s/f of PVC conduit with elbow,bends,couplers,tee etc complete

S&Fsemi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 AMP 12 KAMP reputuring cap.

M&L for applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface, complete all as specified and directed.

M&L Preparation to new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coat of Synthetic enamel paint over a redoxide etc.

M/s Rahul Traders