DEVELOPMENT OF BASAVA SAMUDAYA BHAVAN BUILDING AT DEVARA MANE LAYOUT IN JEWARGI TOWN OF JEWARGI TALUKA, KALABURAGI DISTRICT (CONTINUED WORK).UNDER CM SPECIAL GRANT FOR THE YEAR 2024-25.

DEVELOPMENT OF BASAVA SAMUDAYA BHAVAN BUILDING AT DEVARA MANE LAYOUT IN JEWARGI TOWN OF JEWARGI TALUKA, KALABURAGI DISTRICT (CONTINUED WORK).UNDER CM SPECIAL GRANT FOR THE YEAR 2024-25.

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating

and fixing with necessary screws etc., complete. Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel pla...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including

water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness

to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating

and fixing with necessary screws etc., complete. Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel pla...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including

water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Electrification Work

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x17...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5S...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5S...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Supplying & fixing retrofit type-PL- LED Lamp . W LED linear source with CCT 6500 degree K, CRIgreater than 70%. efficacygreater than80 lumen per W, lifegreater than 25000 burning hours and Compliance...

Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, ...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3...

Sanitary And Water supply

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing brass bib cock of approved quality :20 mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore.

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard ...

Providing and fixing granite stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions

by cutting a chase of appropriate width with c...