REPAIR MAINT OF STREET SECURITY LIGHT FITTINGS, SOLAR POWER STREET SECURITY LIGHTS, HIGH MAST LIGHTS AND CONNECTED WORKS AT SITE E AND AMDALLI TOWNSHIP UNDER GE SEABIRD KARWAR

Amount

Taking down carefully old defective LT UG cable of any size including cable protection pre cast concrete cover / bricks from the trenches and keeping aside for reuse/ disposal complete all as specified and directed.

Supply, laying, jointing and testing of LT underground XLPE insulated screened PVC bedded, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross-sectional area 16 Sqmm, 4 core, conforming to IS-7098 (Part-I) of 1988 laid in trenches/ wall/ floors/ ducts etc fixed with saddle and clamps or passing through pipes complete with cable and connection with proper thimbles, nuts, bolts and washers all as specified and directed. (Excavation & earth work, sand cushioning and PCC cover for cable protection will be measured & paid for seperately.)

Description all as per item No 2.00 above but cross sectional area 10 Sqmm 4 core.

Description all as per item No 2.00 above but cross sectional area 25 Sqmm 3.5 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying/ taking out cable and getting out in soft/ loose soil all as specified and directed.

Description all as per item No 5.00 above but depth exc 1.5 m but not exc 3.00 m.

Returning, filling in soil including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material/ soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Supply and spread dry river sand in trenches for cable cushioning all as specified in clause 19.75 of SSR Part-I. NOTE: Punned thickness of sand only will be measured & paid.

Supply and laying in repairs un-reinforced pre-cast concrete cable cover, class LV, type 1, flat, size 250 mm x 150 mm x 40 mm complete all as specified and directed.

Laying only un-reinforced pre-cast concrete cable cover, class LV, type 1, flat, size 250 mm x 150 mm x 40 mm complete all as specified and directed.

Supply and laying in repairs galvanised iron tubing, light grade of size 40 mm dia with all fittings as in cable protection, laid in trenches, including taking down existing unserviceable GI pipes & its connections complete all as specified and directed by Engr-in-Charge.

S & F in repairs open construction heavy duty VPIT copper wound ballast 70 W for HPSV/ MH fitting complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No BJOS 70 SV/MH 169408 orequivalent in Phillips/CG/Havells

S & F in repairs open construction heavy duty VPIT copper wound ballast 150 W for HPSV/ MH fitting complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 162109 or equivalent in Phillips/CG/Havells

S & F in repairs open construction heavy duty VPIT copper wound ballast 250 W for HPSV/ MH fitting complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 169677 or equivalent in Phillips/CG/Havells

S & F in repairs open construction heavy duty VPIT copper wound ballast 400 W for HPSV/ MH fitting complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 169233 or equivalent in Phillips/CG/Havells

S & F in repairs HPSV tubular bulb/ lamp of capacity 70 watt complete all specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 142070 or equivalent in Phillips/CG/Havells

S & F in repairs HPSV tubular bulb/ lamp of capacity 150 watt complete all specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 142150 or equivalent in Phillips/CG/Havells

S & F in repairs HPSV tubular bulb/ lamp of capacity 250 watt complete all specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 142250 or equivalent in Phillips/CG/Havells

S & F in repairs HPSV tubular bulb/ lamp of capacity 400 watt complete all specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 142400 or equivalent in Phillips/CG/Havells

S & F in repairs ignitor suitable for HPSV/ MH street light fitting of capacity 70 to 400 watts complete all as specified and directed. MAKE: Havells Cat Part No LHGEAJENNNA1099 or equivalent in Bajaj/CG/Philips

S & F in repairs capacitor 10 mfd suitable for HPSV/ MH street light fittings 70 to 400 Watt complete all as specified and directed by Engr-in-Charge. MAKE: Bajaj Cat Part No 29511 or equivalent in Havells/Philips/CG

S & F in repairs contactor MNX-32, 3 Pole, 415 volt coil voltage 230 volt complete as in street light timer assembly including removing old unserviceable contactor all as specified and directed by Engr-in-Charge. MAKE: L&T Cat Part No CS94111 or equivalent in Siemens/ABB/GE/ Schneider

S & F in repairs for contactor MNX-40, 3 Pole, 415 volt coil voltage 230 volt complete as in street light timer assembly including removing old unserviceable contactor all as specified and directed by Engr-in-Charge. MAKE: L&T Cat No CS94190 or equivalent in Siemens/ABB/GE/ Schneider

S & F in repairs for digital weekly programmable time switch for controlling street lights Single Phase 230 volt complete of capacity 15/16 Amp complete all as specified and as directed by Engr-in-Charge. MAKE: Havells Cat Part No DHTJW01016 or equivalent in L&T/Siemens

S & F in repairs MCCB 63 Amps rupturing capacity 16 KA, 4 pole, 415 volts AC with fixed thermal magnetic release complete all as specified and directed by Engr-in-Charge. MAKE: Indo Asian Cat Part No 830020 or equivalent in Legrand/ Havells/Scheneider

S & F in repairs MCCB 100 Amps rupturing capacity 25 KA, 3 pole, 415 volts AC with adjustable thermal and adjustable magnetic setting complete all as specified and directed by Engr-in-Charge. MAKE: Indo Asian Cat Part No 830038 or equivalent in Legrand/ Havells/ Scheneider

S & F in repairs MCB Triple Pole & Neutral, 63 Amp, 415 Volts, 10 KA capacity, 'C' curve series complete all as specified and directed. MAKE: Indo Asian Cat Part No 810098 or equivalent in Legrand/ Schneider/ Seimens /L&T

S & F in repairs MCB, single pole 6 to 32 Amp, 240 Volts, 10 KA Capacity 'C' curves series complete all as specified & directed. MAKE: Indo Asian/ Legrand /Schneider/Seimens/ L&T .

S & F in repairs FRP cable looping boxes of size 300 mm x 200 mm x 105 mm with TPN aluminium bus bar and MCB SP 6 Amp- 01 No, 10 KA breaking capacity, 'C' curve series, factory made with PVC sheet including heavy duty connector for connection of 4 core cable & fixed to pole with suitable size flat iron clamp, nuts & bolts complete all as specified and directed by Engr-in-Charge. MAKE :Sintex or as approved by GE.

S & F in repairs PVC insulated and sheathed copper multistranded cable three core, 1.5 sqmm, heavy duty through or on pole connecting to cable looping box of street light fitting all as specified & directed.

S & F in repairs PVC insulated and sheathed copper multistranded cable three core, 2.5 sqmm, heavy duty through or on pole connecting to cable looping box of street light fitting all as specified & directed.

S & F in repairs two way heavy duty PVC connector suitable for 10 or 16 Sqmm cable connection in looping box complete all as specified & directed.

S & F in repairs aluminium thimbal/ lugs of size 10 to 25 Sqmm for cable connection as per site requirement complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old surface by scrapping down old peeled off paint using sand paper, removing dirt/ dust from steel tubular pole and painting to steel tubular pole (9 m long) including street light bracket and applying two coats of aluminium paint including marking the pole number etc complete all as specified and directed.

Taking down carefully existing old unserviceable street/ roadway/ flood light fitting of any type/ size from poles/ bldgs of any type/ height and deposit the same to MES store/ Substation where directed for repair/ reuse/ credit complete all as specified and directed.

S & F 90 Watt LED roadway luminaire, LED street light made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of iK07 with 10 KV built-in-surge protection device with high power LED as light source and HF electronic driver of 200 W capacity including making necessary connection complete all as specified and directed. MAKE: Havells Cat No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or equivalent in Bajaj/ CG/ Philips

S & F 200 Watt LED flood light energy saving, environment friendly, long life, exclusive innovative die- cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting with high power LED as light source and HF electronic driver & control gear box of 200 W capacity including making necessary connection complete all as specified and directed. MAKE: Havells Cat No. JetaValourfl200Wled757modnBltG and for CG Box Cat No. assemBledCGBoXValour200WaP or equivalent in Bajaj/ CG/ Philips

S & F LED flood light luminaire 180 Watt with secondary optics innovative die-cast aluminium flood light with highly efficient LED as light source, for highlighting architectural features or retail spaces IP66 protection complete all as specified and directed. MAKE: Havells Cat No. JetaValourfl180Wled757PintnBltG or equivalent in Bajaj/ CG/ Philips

M & L for earthing complete with galvanized cast iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanized earth lead 4 mm dia by means of bolts, nuts, washers and check nuts of steel/ GI duly protected with 15 mm bore light grade pipe upto main board, 20 mm bore watering pipe light grade with CI/ MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 m, charcoal dust and common salt in adequate qty all as shown in electrical plate No 3 of SSR Part-I 2009 having pit and cover in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40 mm x 40 mm x 6 mm grouted in PCC pit for PCC cover, funnel with wire mesh complete and all as specified and directed by Engr-in-Charge. NOTE: The unit rate quoted shall be deemed to include for necessary excavation and earth work, PCC 1:3:6 type CI chamber, funnel with GI medium grade watering pipe 15 mm bore, RCC cover slabs 50 mm thick with 8 mm dia CTD bars @ 140 mm c/c both ways etc complete.

S & F in repairs gate or garden light any type or size, supply and fixing decorative gate light including 1 x 20 W LED lamp made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base IP65 complete all as specified and directed by Engr-in-Charge. MAKE FOR GATE LIGHT: Havells Cat Part No LHFXAMN1TN6F035 or equivalent in Bajaj/CG/Philips. MAKE FOR LED LAMP: Havells Cat Part No LHLDEUEEMC8R020 or equivalent in Bajaj/CG/Philips.

Supply & erecting in repairs of damaged/ corroded steel tubular swaged pole by erecting truly to vertical position steel tubular swaged pole complete with cast iron base plate welded with pole, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 m long) including one coat of red oxide zinc chrome primer and two coats aluminium paint on surfaces, exposed to view and making 30 cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including writing pole No with letters/ figures of size not exc 30 mm with black paint on a yellow circle of dia 75 mm after painting, complete including dismantling of old steel tubular pole all as specified and directed by Engr-in-Charge. MAKE: Bajaj or equivalent as approved by GE. NOTE: PCC, Earth Work shall be measured and paid separately under respective items.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for coping etc as mass concrete complete and all as specified and directed by Engr-in-Charge.

M & L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for foundation of pole, stay assembly etc as mass concrete complete and all as specified and directed by Engr-in-Charge.

S & F in repairs LED driver suitable for 90 Watt LED street light fittings complete all as specified and directed by Engr-in-Charge. MAKE: Havells//Bajaj/CG/Philips.

S & F in repairs solar charge controller box for lights all as specified and directed by Engr-in-Charge. MAKE: Luminous Model No SCC1210NM or equivalent in Exide/Tata/ Amar Raja

S & F in repairs solar panel 165 Watt 12 Volts complete all as specified and directed. MAKE: Luminous/ Tata/ Supreme

S & F in repairs and install maintenance free battery of capacity 12 volts 150 AH suitable for solar light fittings on pole or transit tower of any height in any location complete all as specified and directed. MAKE: Exide Cat No. 6SGL150 Tubular GEL VRLA Solar SOLATRON or equivalent in Luminous/ Amar Raja

S & F in repairs battery protection cover as per existing size made out of 3 mm thick MS sheet and angle iron frame of size 25 x 3 mm including painting with two coats of existing colour over a coat of red oxide primer including all fixing arrangements complete including taking out old corroded unserviceable box complete all as directed.

JAI SHREE GOPAL ELECTRICALS

M/S MANOJKUMAR M NAGARKATTE

SIRI SALES AND SERVICES

Raheel Enterprises

Bidder Name

Raheel Enterprises

JAI SHREE GOPAL ELECTRICALS

M/S MANOJKUMAR M NAGARKATTE

SIRI SALES AND SERVICES

BROTECH