Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.7 L+₹1.3 L (5.83%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹22.8 L+₹1.3 L (6.07%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹23.9 L+₹2.4 L (11.3%)Rejected-Finance HOSUE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L4 | Rejected-Finance L4 | |
| 5 | L5₹24.9 L+₹3.4 L (15.7%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-61/2023-2024 MAINT AND REPAIRS TO BLDG OF 359 SUP TYPE G AND 3 LADAKH SCOUTS UNDER AGE B/R II AT CHANDIMANDIR
2023_MES_628137_1
GE/CHM-61/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹80,000
Yes
15 Jan 2024
13 Nov 2023
14 Dec 2023
13 Nov 2023
11 Dec 2023
27 Nov 2023
Amount
Taking down cement plaster / terrazo of any description from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete, all as specified and directed.
15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, complete all as specified & directed.
Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete surface of roof with mixing of WPC, finished even and fair without using extra cement complete all as specified & directed. Note :- WPC will be measured & paid separately as supply only).
10mm thick rendering cement plaster in Cement and Sand mortar 1:3 over brick work or concrete surfaces finished even and fair, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.
Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.
Glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed.
Non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed.
Non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square Metre but not exceeding 0.38 Square Metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed.
Vitrified ceramic tiles coloured first quality dark shade 8 to 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
All as per serial item No 13 herein before but in skirting, riser of staircases etc over and including 10mm thick rendering in cement mortar 1:4
Machine cut kota stone slab on flooring etc, 20-25mm thick , best quality, width and length as ordered over and including 15mm thick screed bed in cement mortar( 1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing, complete all as specified and directed.
All as per serial item No 15 herein before but in skirting, riser of staircases etc over and including 10mm thick rendering in cement mortar 1:4
Powder coated aluminum frame (thickness or powder coating of any colour not less than 50 micron) for doors, windows, ventilators, partition etc and for door/window shutters (openable or sliding) with one or more rebates including joining cleat for fixing etc, fixed as in repair complete all as specified and directed. Note: Glazing shall be measured and paid separately under respective items.
Powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium partition/ door /window/ventilator shutters made of aluminium sections (wall thickness of aluminium section not less than 2mm) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Note : (i) Glazing and wire mesh shall be measured & paid separately under respective items . (ii) The rate quoted shall be inclusive of the cost of neoprene beading, glzing clips, screws and powder coated fittings such as hinges, tower bolts, locking arrangement etc (iii) The rate shall also be inclusive of complete rubber packing, silicon gel aroud contacting surface of aluminum work (iv) Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
75mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm and removal from site complete all as specified & directed.
Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels, commercials type on both sides,including a shop coat of pink primer, complete all as specified & directed.
Glazed and gauged skelton shutter, 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (with sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing mentioned on Srl Page No. 134, 135 and 146 of SSR Part-II including aluminum iron mongery.
Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
Extruded aluminium alloy handles, cast type, 150mm long , all as specified.
Extruded aluminium alloy handles, cast type, 125mm long , all as specified.
250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square, area exc 0.5 sq. mtr in each pane, including hacking out old broken glass complete all as specified and directed.
Supply only 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Supply only 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels n.exc 0.5 Square metre in each pane, complete all as specified & directed.
Stainlesssteel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18 mm in fixed with tinned tacks, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, all as specified and directed.
Supply and fixing mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint including all necessary wetting and curing, complete all as specified and directed.
Three coats of white wash on wall surfaces including preparation of new plastered surfaces complete all as specified and directed
Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, over and including 2mm thick (average) wall care putty and sand papering, complete all as specified & directed by Engineer-in-charge.
Preparation of old decorated plastered surfaces of walls and applying two coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified.
Preparation of old plastered surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.
One coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth , including preparation of old surfaces , complete all as specified & directed.
One coat of synthetic enameled paint on old wooden surfaces of any description ,including preparation of old surfaces , complete all as specified & directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) o complete all as specified and directed.
25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc, fixed as in repair complete all as specified and directed.
Plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, including demolition of old cement concrete complete all as specified & directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Pond curing of sunken portion for minimum of 48 hours. (e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface. (f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound.
Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.
Reinforced cement concrete, 1:2:4 (nominal mix, type B-0, using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete, all as specified and directed .
Form work to flat surfaces of suspended slabs such as roof slab, floor slab, landing, shelves etc not exceeding 200mm thick, including edges in any position, rough finished surfaces, complete all as specified and directed.
Mild steel TMT bars 10mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel TMT bars 6mm to 8mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Stop valve cast copper alloy, screwed down high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib taps brass, with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed.
PVC (SWR) pipe, type 'B' 110mm bore, single socketed in any length with rubber ring joints, laid in trenches / in floors or fixed to wall including clamps, fixed as in repair complete all as specified and directed.
PVC (SWR) pipe, type 'B' 75mm bore, single socketed in any length with rubber ring joints, laid in trenches / in floors or fixed to wall including clamps, fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bend any radius , fixed in repairs, complete all as specified and directed
75mm bore PVC (SWR) bend any radius , fixed in repairs, complete all as specified and directed
PVC (SWR) floor trap 100mm bore, plain with grating incl jointing with solvent cement, fixed as in repair complete all as specified and directed.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement fixed as in repair complete all as specified and directed.
Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of 500 litres capacity, double layered hoisted and fixed in position, including tank nipple, including taking down old tank, complete all as specified and directed.
Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of 1000 litres capacity, double layered hoisted and fixed in position, including tank nipple, including taking down old tank, complete all as specified and directed.
Float valve / ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms ) for 20mm bore pipe, complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including, CP pillar tap, CP waste coupling, angle brackets and PVC waste pipe, fixed as in repair, complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level, dual flush, white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including and 32mm dia PVC long bend for squat pattern etc , fixed as in repairs, complete all as specified & directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs, complete all as specified and directed.
Supply only 9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber/ aluminium frame work complete all as specified and directed.
Vitreous china squatting pan “Orissa” pattern of size 580mm x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete, set with cement concrete, fixed as in repairs, complete all as specified & directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar etc , removing any type of existing treatment ,complete all as specified and directed.
40mm thick brick tiles with including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed.
All as per serial item No 87 herein before but except tiles –ditto-
Plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.
Supply only Integral waterproofing compound, all as specified.
Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc, complete all as specified and directed.
Gunjan and Gunjan Associates
MS R G ENTERPRISES
m/s AR Construction co
sham enterprises
PARVEEN KUMAR AND SONS
IMPERIAL ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .