Restructuring and renovation of vessel PT Godapani under IWT Directorate HQ

Amount

Dry docking of vessel / boat etc. on the bank of the river, jacking lifting the same up to the workable condition as directed. Up to 10 ton wt.

Additional per ton wt. or part there of

Supplying / providing wooden block up to the size (75 x 45 x 30) cm under lifted vessel / boat etc. including necessary wooden packing as per direction complete. b) Non- Sal wood block. Considering utilization cost 30% of total Qnty.

Cutting and removing old damaged plate, angle etc. by using gas including the cost of labour etc. Complete

Supplying I.S. grade 2062 mild steel plate of required size and specified thickness in keel / bottom hull / side hull/ transom /side keelson etc. for the hull erecting in position by cutting, bending, straightening etc. in proper shape and size and welding the same including cost of labour and materials etc. complete as directe

Providing M.S. plate cutting into required size fitting and fixing by welding in superstructure passenger accommodation, wheel house, cabin etc. including cost of labour and materials. Superstructure

Providing frame work in Hull & Superstructure by cutting M.S. angle, M.S. road, channel etc. in to required size welding the same including cost of labour and materials complete.

Providing ,fitting and fixing colored anodized aluminum sliding windows and ventilator of stander section framed glazed doors with anodized aluminum frame………………….. as specified and directed by the department. 6mm clear plain glass wheel house window:-

Providing fitting and fixing in position plywood/ hardboard walls ceiling with 6mm thick ply board/ hardboard (best) with horizontal and vertical Sal battens of size 50mm x 80 mm spaced at not more than 1.20 m apart with necessary nails, wood screws, bolts etc. complete as directed by the department for all levels. 6 mm thick Ply board (On one face of the frame)

Providing bollard made from Heavy duty MS pipe of required size including providing its base frame on the deck of the vessel (Big size) Double Bollard

Providing bollard made from Heavy duty MS pipe of required size including providing its base frame on the deck of the vessel (Big size) Single bollard

Providing, fitting and fixing 1st class local wood (Bonsum / Hollock) battened, framed and braced door and window sutters including oxidized iron butt hinges (100mm x 58mm x 1.90mm) 6nos with necessary screws.

Wiring of light point with 1.5 sqm. PVC insulated unsheathed I.I KV grade ISI marked single core copper conductor cable in recessed PVC conduit wiring system with 19mm dia. rigid PVC conduit including 6Amp flush type switch in iron clad switch board (ISI) cover ceiling rose complete. Short point-15 nos

Wiring of light point with 1.5 sqm. PVC insulated unsheathed I.I KV grade ISI marked single core copper conductor cable in recessed PVC conduit wiring system with 19mm dia. rigid PVC conduit including 6Amp flush type switch in iron clad switch board (ISI) cover ceiling rose complete. Medium point-15 nos

Providing and fixing ICS N link main switch of 250 V rate including drilling board / iron frames and fixing with bolt & nuts and connection etc. completed. 30/ 32 AMP

Wiring for main line with PVC insulated unsheathed ISI marked as approved by this department single core copper conductor coble in surface PVC conduit wiring system including painting etc. as required complete including earth continuity by PVC insulated unsheathed copper cable. With 3 x 16 sqmm. + 1 x 6 sqmm PVC insulated unsheathed copper conduct on with 32 mm dia. 1.50mm thick rigid PVC conduct.

Supplying fitting and fixing of retrofit LED lamp in the existing luminaries. PHILIPS/ CROMPTON GREAVES/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR make.

500 watt Halogen lamp (Model No QVF135/500 Phillips Make 500 watt Halogen lamp

Removing old paint from steel and other metal surface and making the surface even. With hand scraping

Applying primary coat over new wood and wood based surfaces over 100mm in girth / width after and including preparing the surface by thoroughly cleaning oil, greases, dist and other foreign matter send papering and knotting. b) with ready mixed paint wood primer of white) approx. surface area 600 m2

Painting two coat (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture ( Asian Paint / Berger/ ICI paint/J& N paint /Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and slopping. i) Surface over 100mm in width or girth a) General purpose ( Asian Paint / Berger/ ICI paint/J& N paint /Nerolac)

Painting three coats( excluding priming coat) on new steel and metal surface with ready mixed bituminous paint of approved brand and manufacture (Asian paint /Berger paint/I.C.I. paint/ J&N paint/Nerolae) after applying black anticorrosive paint give an even shade including cleaning the surface of all dist, dust and other foreign matter.

Applying primary coat over new steel and other metal surfaces over 100mm in girth / width after preparing the surface by thoroughly cleaving oil, grease, dist and other foreign matter and scored with wire brushes fine steels, wood serapes and send paper.

Painting two coats (excluding priming coat )over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, dirt grease, and other foreign matters and scoured with wire brush , fine steels, scrapper sand paper etc.

Letter writing on wall surface of P.T. Godapani of size 100mm and 90mm and emblem etc.. Total = 190 nos

Ashok Stambha

Emblem

Launching the vessel/boat/RPL etc. in to the river water cone fully as per direction. a) Up to 10ton weight.

Launching the vessel/boat/RPL etc. in to the river water cone fully as per direction b) Addl. Per ton or part thereof - 40ton

Mooring Materials:- 1. Steel wire rope 19mm dia

2. Nylex rope 40mm dia

3. U-Shackle 19mm dia

4. D-Shackle 19mm dia

5. Wooden hummer

6. Mooring pin

7. Old tyre (Truck)

Providing life saving and five fighting equipment 1. Life bouy

2. Life Jacket

3. Foam type fire extinguisher(9lir capacity)

4. Soda acid type(9lir capacity)

5. Dry chemical type(3.2kg)

6. Fire bucket(9lir capacity)

SUPPLY OF SPARES FOR STD SIDE ENGINE Cylinder Liner (with O ring ) (29.36510000)

Piston ring set (2999902000)

Piston Pin (2921010000)

Cy. Head Gasket(2920903000)

Nozzle Sleeve (2921903000)

Thermostat (2924291000)

Element corrosion resistor (2929805000)

Copper washer set ‘W6V’(290452000)

Hose Pipe, 150 mm (291202000)

Con.Rod Bolt (M16X175) (2921102000)

Valve Guide(29220030000)

Valve Inlet(29221001000)

Valve Exhaust (2922103000)

Valve Collect(2922109000)

Push Rod Assy.(2922134000)

Con. Rod Bearing(OH 0039000)

Main Bearing (OF 00390001)

Valve Seat insert (Inlet ) (30050160000)

Valve seat insert(exhaust)

Fuel return pipe(2922708000)

Hose Pipe (F/pump to Filter) (29227120000)

Relief valve Assy.(2923010000)

O’Ring air cleaner element(2924207000)

Exhaust Manifold(2923908000)

Injector Bush(0203508000)

Exhaust Silencer(0608901000)

Fuel filter Assy.(3403230000)

Ammeter(0312401000)

L.O. Pressure Gauge(4624401000)

L.O. Temp. Gauge(341830000)

Decompression Valve (3005010000)

Water Temp. Gauge (3802702000)

Nozzle (22010040000)

Injector Assy.(2201020000)

Fuel Pump element (22020910000)

Fuel Pipe (2206301000)

Labour Charges Crank shaft grinding, turning, polishing

Labour Charges for Con. Rod re-boring

Labour Charges for Con. Rod alignment checking

Labour Charges for Valve seat cutting & fitting

Labour Charges Cylinder Head testing

Labour Charges Main bearing setting

Labour charges for Crank shaft bend testing

Labour charges for Crank shaft crack testing

Labour charges for Calibration of fuel pump

Labour charges for overhauling of main engine including replacing and assembling of Engine parts with spares and starting the engine & test for 24hours running

SUPPLY OF SPARES FOR PORT SIDE ENGINE Cylinder Liner (with O ring ) (29.36510000)

Piston ring set (2999902000)

Piston Pin (2921010000)

Cy. Head Gasket(2920903000)

Nozzle Sleeve (2921903000)

Thermostat (2924291000)

Element corrosion resistor (2929805000)

Copper washer set ‘W6V’(290452000)

Hose Pipe, 150 mm (291202000)

Con.Rod Bolt (M16X175) (2921102000)

Valve Guide(29220030000)

Valve Inlet(29221001000)

Valve Exhaust (2922103000)

Valve Collect(2922109000)

Push Rod Assy.(2922134000)

Con. Rod Bearing(OH 0039000)

Main Bearing (OF 00390001)

Valve Seat insert (Inlet ) (30050160000)

Valve seat insert(exhaust)

Fuel return pipe(2922708000)

Hose Pipe (F/pump to Filter) (29227120000)

Relief valve Assy.(2923010000)

O’Ring air cleaner element(2924207000)

Exhaust Manifold(2923908000)

Injector Bush(0203508000)

Fuel filter Assy.(3403230000)

Ammeter(0312401000)

Decompression Valve (3005010000)

Water Temp. Gauge (3802702000)

FUEL PUMP Nozzle for fuel pump (22010040000)

Injector Assy.(2201020000)

Fuel Pump element (22020910000)

Labour Charges Labour Charges for Valve seat cutting & fitting

Labour Charges Cylinder Head testing

Labour charges for Calibration of fuel pump

Labour charges for overhauling of main engine including replacing and assembling of Engine parts with spares and starting the engine & test for 24hours running

Mobil Oil (SAE-40 )

HS Diesel

REPAIRING OF GENERATOR :-Main bearing changing

Piston complete changing

Cylinder changing

Fuel pump element changing

Fuel tank strap changing

Fuel pipe

Dipstick

Exhaust Manifold

Valve (inlet & exhaust)

Air cleaner assy.

Valve Spring

Connecting Rod

Cy. head Stud

Injector Assy

High pressure Pipe

Fuel filter assy.

Lub. Oil strainer

REPAIRING OF GEAR BOX :-Plate Clutch (503 00 280 00)

Plate Clutch Steel (503 00 209 00)

Spring outer Valve (503 01 905 50)

Spring Inner Valve (503 01 906 50)

Hose pump to filter (503 01 702 00)

Piston (503 02 014 00)

Hose Flexible (503 01 703 00)

Gasket (503 00 705 00)

Gasket (503 00 709 00)

Seal Oil (503 01 00 100)

Elbow Suction Hose (503 01 606 00)

Plate Orifice (503 02 015 00)

Strainer Oil (503 00 114 50)

BADAN KALITA

Das Consultancy And Agency Services