Construction of 33/11 KV Control room and Substation Erection works at Su valavetty in Tiruvannamalai EDC.

Amount

Clearing light/heavy jungles and disposing off to a placeaway from the site as directed by the Engineer in charge including all labour charges,T&Ps etc.,complete

Earth work excavation for foundation, retaining wall, fencing, Cable duct, and other SS Structure in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.

Earth work excavating for foundation and other SS Structure and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting as per standard Specification as directed by the Engineer at site.

Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.

Filling the sand for filling in the foundation for and floor including cost of sand, filling charges as per standard specification (watering & consolidation with all leads and lifts etc., complete.

Plain cement concrete in CC 1:3:6, for control room, cable duct, retaining wall and fencing using 40 mm HBG metal, for foundation / Padding Concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.

P.C.C 1:3:6 using 20 mm metal for foundation for culvert and other SS Structure Etc.,including cost of materials, lead, lift etc., complete.

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Column footing, flooring inside control room,and road,including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Grade beams, Plinth beams, lintel beam, cable duct and sill beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Re-Filling with Excavated Earth in foundation and basement including cost off all labour materials, lead, lift, curring etc., complete.

Brick work in C.M. 1:5 using chamber burnt class II bricks, for Basement, superstructure, septic tank, cable duct, retaining wall, fencing and pump room, including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Brick work in C.M. 1:3 using chamber burnt class II bricks, for water storage sump in below ground level including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Column up to Ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Column above Ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Lofts including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Lintel including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Sunshade-0.60M width including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Sunshade-1.00M width including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Roof beams including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Roof slab 130 mm thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal for RCC Roof slab 125 mm thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)

R.C.C 1:1:5:3 Cover slab for the cable duct

Providing and laying weather proof Tiles 300mmx300mm size over screed concrete 1:2:4 using 10 to 6mm HBG metal with average thickness of 50 mm for required gradient and using best quality of one course of weather proof cooling white tiles of approved quality using in CM 1:3, 12mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc., complete.

Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T&Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification

Filling with stone dust in 33KV and 11KV inside including cost of all labour, materials, leads, lift,etc., complete and as directed by the department engineer at site.

Supplying and filling 20 mm metal in transformer yard including cost of lead, lift, labour, material, etc., complete.

Supplying and filling gravel in inside control room basement with excavated earth other than sand and consolidating in 150mm thick layers, well rammed with all leads, lifts watering, as per standard specification etc., complete..

Providing grout holes at required position including cost of all materials, curing, labour, lead, lift, etc., complete

Supplying , labour charges for fabrication, fixing in position of MS rail with proper anchorage by using welding and cutting to the required size and length over plinth as per the departmental specification

Plastering with CM 1:3, 10 mm thick for Ceiling, Sunshade, other Trasnformer and SS structure bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Plastering with CM 1:5, 12 mm thick for Wall surface, including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Floor finsinhing with CM 1:3, 20 mm thcik over PCC 1:4:8. using 40 mm metal, 100 mm thick for Store room including cost of cement, all materials, labour, curing, leads and lifts etc., complete.

Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste wherever required.

Colour washing Two coats inside walls using Interior emulsion paint over a primer one coat and two coats of wall putty including cost of all materials, labour, lead, lift etc., complete.

Painting with two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

Painting 2 coats of Acid Proof Paint over 1 coat of Cement Primer including cost of all materials, labour, lead, lift etc., complete.

Manufacturing and fixing of Anodised Aluminium Glazed door using Outer Frame 101.60 @ 1.608 Kg/m and Door inner frame side and Vertical 53.70 X 44.45 & 1.238 Kg/m and Door Bottom section 83.50 x 44.50 @ 1.67 Kg/m and divider & Top of Door frame 47.62 X 44.65 @ 1.072 Kg/m glazing Clips of 17.30 x 19.00 X 0.60 mm @ 0.083 Kg/m with everite / Pioneer, Floor gear rubber beeding, Hinges, Handle & 5 mm thick CGL make cooling glass including cost of all materials, labour, transport. lead, lift etc., complete.

Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) Windows of casement type of required section with Shutter inner lock glazing clips rubber gaskets sliding wheel & 5 mm thick plain glass Panelling including cost of all materials, locking arrangement, labour, lead, transport, lead, lift etc., complete.

Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) Ventilator size 0.75 X 0.60 m fully galzed Lover type as per standard specifgications with frame and frosted glass 4 mm thick including coast of all materials, labor, lead, lift etc., complete.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,

Supplying and fixing Windows (2 leaves) of approved size using 35x35x5mm MS Angle for outer frame 25x25x3mm Angle for shutter frame with shutter 18 Gauge MS Sheet of bottom panel and top panel with 12 mm thick glass, fixing 12mm MS Rods horizontally (11 Nos.) with necessary locking Arrangements, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour for fabricated steel work including cost of all materials labour leads, lifts etc., complete.

Painting 2 coats of Enamel Paint over 1 coat of Red Oxide for Steel Doors & Windows with approved quality & colour including cost of all materials, labour, lead, lift etc., complete.

Supplying and laying of vitrified floor tiles of 600 x 600 x 8mm of approved ISI mark of best quality & colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and laying of non-slippery tiles of 300 x 300 x 8mm of approved ISI mark of best quality & colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Dadooing wall with glazed tiles of approved colour of size 300 x 200 x 6 mm and quality of ISI mark, laid in CM 1:2, 10mm thick and pointing with white cement using 0.40 kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and laying of Acid proof tiles of 300 x 300 x 5mm of approved ISI mark of best quality & colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and fixing white glazed earthen ware (Indian type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.

Supplying and fixing white glazed porcelain oval shape special type urinal of sizs 382x398x601 mm including lead ,lift etc., complete.

Supplying and Laying of 110 mm dia. PVC pipe (6Kg/Cm2) for Sewage line from Septic Tank to Dispersion Trench including cost of all materials, labour, lead, lift etc., complete.

Supplying Godrej Navtal lock of approved type with 6 livers including cost of locks with three keys leads, lead etc., complete.

Supplying and Fixing of Floor Trap 100 X 50 mm in size for Bath room including cost of materials, lead, lift etc., complete.

Supplying and fixing white / Colour glazed earthen ware wash basin of size 550 X 440 mm in size reputed make with Gate valve including cost of all fitting materials lead lift Transporting labour charges etc., complete.

Supplying and fixing of Best quality of Mirror 600 X 450 mm in size with soap tray, Towel rod over hand Wash basin complete.

Supplying & fixing of PVC pipes (10 Kg/cm2) with ISI make for water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of 25 mm dia PVC pipes (10Kg/cm2) with ISI make for water Supply arrangements including cost of Pipe, Bend, Tee, L- Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Providing and fixing 12mm C.P.Pillar cock for water supply tap with angle stand including cost of pipe and labour fixing charges lead, lift etc., complete.

Supplying & fixing of 40 mm dia GM Gate Valve with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.

Supplying & fixing of 25 mm dia GM Gate Valve with ISI make for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete

Supplying & Fixing of GI angle size of (65mmx65mmx6mm) fixing at 600mm C/c for Cable duct inside the Control room including all labour, lead, lift etc., complete

Supplying and Laying of 110 mm dia. 4 Kg/cm2 PVC pipe for Rain water fall pipe including cost of all materials, labourm lead, lift etc., complete.

Supplying and fixing of Cast Iron man hole cover heavy duty of approval quality size 600 x 600 mm to cover the man hole including cost of all materials, lead, and lift, etc., complete.

Supplying and fixing of ISI make 4 way Triple pole and natural MCB Distribution Board with 1 No. 6 to 32 Amps DP IC Switch of 500V, As incoming 6 Nos. 6 to 32 Amps SPMCB out going necessary flush with wall and making good of cancelled portion with earthing as per PWD standard arrangement.

Wiring with 2.50 sq mm PVC unsheathed multistrand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point.

Wring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Wiring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.

Supplying and fixing of Slanding Holder with LED 14W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.

Supplying and fixing of Twin type Decorative type Led Tube 4' 20W fittings with Copper choke & slim type LED tube and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing 1200mm (48") swap AC ceiling fan with 600mm down rod with approved best quality make of standard specification with electronic regulators and switch, including cost of all materials Labour fixing charges etc., complete.

Supplying and fixing of 450 mm AC Sweap AC Exhaust Fan Heavy duty including Providing necessary hole in wall, fixing charges, lead, lift etc., complete.

Supplying and fixing of single box Street light type with Led 30 W light fittings with ISI markwith GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.

Supplying and fixing of Earthing with Electrode of 2 mtr. class B GI Pipe less than 32 mm dia. complete.

Supplying and fixing of 4way, triple pole MCB safe trip Havells of approved or equivalent quality 25amps with suitable box including cost of all materials, labour, lead, lift etc., complete as per standard specification.

Fabrication and Erections of Name Board of size 1.80 m x 0.90 m using 18 guage M.S.Sheet with outer frame of 50x50x6mm angle and stiffenar at the rear side of 50x6mm M.S flate supported on M.S. chanel ISMC 100x50, 3 mtr.height from the GL and 1m below GL with struts using ISA 50x50x6mm and painting with two coats of approved colour enamal paint over one coat of primer and lettering on the board as per the direction of Engineers at site including cost of all materials, fabrication erection and Transporting charges, lead, lift, etc., complete.

Supplying and fixing of double side Polished Cudappah Slab 20/30mm thick for Shelves rack including cost of all materials, Labour, lead, lift etc., as per standard Specification complete.

Supplying & Laying loosely jointing the 100m dia PVC pipe in the dispersion trench and covered the joint with roofing country pan tiles including cost of all materials, labour, curing all lead, lift etc., complete., as per standard specification

Supplying and fixing of 110 mm dia PVC Tee for inlet and outlet of septic tank including cost of all materials, lead, lift, etc., complete as per standard specification.

Supplying and fixing ventilating shaft of PVC pipe 110 mm dia 6 Kg/ cm2 with ISI make specials, cowl, shoe, bend etc., with all materials, lead, lift, etc., complete, as per standard specification.

Supplying and fixing of 1000 Liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection , lead, lift etc., complete, as per standard specification

Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Supplying & stick the TNEB Embelem in front of control room entrance door including cost, lead, lift, etc. complete, as per standard specification.

Supplying providing and fixing of 12/15 mm Dia GI pipe " B " class of approved ISI make drain pipe to bore well including cost of all materials , labour, lead , lift, Etc, Complete.

Supplying and fixing of 32 A, 3 Phase DP IC main switch of approved make with suitable board complete etc., including cost of labour, lead, lift etc., complete.

Supplying and fixing of 160 mm dia PVC End cap approved best quality with ISI make including cost of all materials , labour, lead , lift, Etc, Complete.

Supplying and fixing of 40 mm dia M S coller for outer hose conection including cost of all materils labour, lead, lift, Etc, Complete.

Supplying and fixing of 53 mm dia G I Elbow for water conection above ground leavel including cost of all materils labour, lead, lift, Etc, Complete.

Supplying and fixing of G I cover box to required size of accomadate for temporary supply including meter board I C carrier etc with necessary clamp,bolts & Nuts , Etc, Complete.

Supplying and fixing of 53 mm dia G I Union for water conection above ground leavel including cost of all materils labour, lead, lift, Etc, Complete.

Supplying and providing following manufactured by TANSI or any other ISI mark including cost of all materials, labour, lead and lift etc., complete S type chair with nylon seated

Steel side rock open type 36"x15"18"

Steel operator table

Steel half bench

steel stool 380x380x460 mm 18 guage

PVC armed Chair of reputed make

Steel Executive Table 54"x30"x30"

Providing projected border of 10 cm width including cost of materials, labour, lead,lift, etc., complete

Filling the dispension trench with 40 mm size HBG jelly including cost of materials, labour, lead, lift and etc., complete

Providing rain water soakpit with approved quantity with 5 Nos RCC well ring of size 4' outer dia and 1' height with approved quality RCC cover slab of size 4'dia and 3'' thickness using 40mm brickjelly and filling sand as filter, including cost of all materials, lead, lift, labour, etc.,

Supply, Transport, Loading , Unloading, fabrication of RS joist (250X125/200X100) and M.S.Plate(10/12 mm) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Supply, Transport, Loading Unloading, fabrication of MS Channel (125x65/100x50) MS Angle to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Supply, Transport, Loading and Unloading of MS Round rod (40mm) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Supply, Transport, Loading and Unloading of MS Flat (65x10 / 50x8) to the site including cost of material, labour, lead, lift etc., complete as directed by the department engineer at site.

Painting Two coat of aluminum paint including cost of paint brush and consumable for yard light pole

Labour for rust removing, cleaning painting of first primer coat (Red oxide) of all sections including cost of paint, brush & consumables

Labour for rust removing, cleaning painting (Aluminium) of first finishing coat of all sections including cost of paint, brush & consumables

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush & consumables

Labour for erection of Heavy section structure ( Sec wt above 14 kg/m)

Labour for erection of Light section structure ( Sec. wt below 14 kg/m)

Labour for erection with own crane arrangement and connecting link rod, SF 6 gas filling and,& other consumables, & as directed by the field Engineer. VCB/SF6 CB 11 or 22 or 33KV

Labour charges for erection of 33 or 22 or 11KV CT,PT(One 1Ph or 3Ph unit)using manual labour or crane by own arrangement

Labour for erection of AB Switch 33 or 22 or 11 KV without earth hand operated

Labour for erection of LAS including fabrication of base if required. station type 33 or 22 or 11KV

Labour for erection of single pole stack upright,under hang or suspension insulator . 33 or 22 or 11kV .

Labour for stringing of strung bus including hoisting of insulators. 33 or 22 or 11KV strung bus singlezebra conductor(1 span 3 runs).

Labour for erection of bus bar Using 50mm with making required bends

Labour for erection of bus bar Using 50 mm without making bends

Labour for providing of jumpers and droppers.

Labour, Machineries, Consumables for Fabrication of earth electrode of 10Mtr/6 Mtr required length for Yard

Labour, Machineries, Consumables for fabrication and erection of earth spike.

Labour, Machineries, Consumables for erection of earthmat and earth raiser

Providing 140/150 mm dia bore using power rig inculding labour, lead lift etc.In all type of soil and erection of earth electrode, supply and providing of A grade Bentonite powder with 5% common salt mixed with available site clay soil 5 Kg per metre depth in earth hole as directed by the field Engineer. Machine Bore

Labour for Erection of Panel/Battery Charger Simplex indoor/outdoor

Labour,tools for charging of battery 110V,120 AH

Labour for erection of battery 110V,120 AH

Labour for laying of cable in duct / trench including the cost of Alu. tag for identification Upto 8 core

Labour for laying of cable in duct / trench including the cost of Alu. tag for identification above 8 core

Labour for excavation and refilling of trench of ave.width of 0.3M and ave.depth of 0.8M for earthmat and and ave.depth of 0.4M for laying of cable below fixed yard level and of any size as required by field engineer.

Supply of 8 Mtr long stepped tubular pole for yard light wherever required and as directed by the field engineer.

Supply of LED lamp 72 W with fitting for yard light wherever required and as directed by the field engineer.

Erection of Yard light Pole including laying of cable inside pole

Erection of LED lamp 72 W fitting with fixture and fuse box including wiring and testing and buring condition,including the cost of 15 A 2 way strip connector and other consumables.

Supply of Fire extinguisher DCP type trolly mounted 25 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher DCP type trolly mounted 10 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher DCP Portable type 5 KG wherever required and as directed by the field engineer.

Supply of Fire extinguisher Foam type 9 ltr wherever required and as directed by the field engineer.

Supply of Switch end clamp for zebra

Supply of Switch end clamp for 2" Bus

Supply of `T`Clamp for zebra to zebra

Supply of `T`Clamp for 50 mm bus to zebra

Supply of 2" Free end

Supply of 2" Seating block

Supply of Corona bell for 50 mm bus bar

Supply of Reducer clamp for 50 mm Bus to Zebra

Supply of PG Clamp for Zebra

Supply of 4 Bolted tension fitting

Supply of rubber mat 2000x1000x10

Supply of chequered plate 6mm

Labour for loading or unloading or shifting of materils Non fragile

Labour for loading or unloading or shifting of materils Fragile

Labour charges for painting of Green enamel paint on all kind of structure earthing including removal of dust, rust using wire brush and painting brush etc.

Hire charges for Crane provided ( 12tonne) for any erection or loading,Unloading or shifting of equipments,done bydepartment or by the contractor.

Manufacturing and supply of bolt of required length out of 18,20mm dia GI round including the cost of GI round and 2 Nos. of GI.nets as directed by the field Engineer. Grout bolt & Eye bolt

Supply and provision of M8, M9, M10, M12, and M16 full thread G.I. Bolts and Nuts of various sizes for erection of AB Switches and insulator or any other purpose wherever required and as directed by field Engineer.

Fabrication, supply and fixing ofindividual equipment board of 750x450mm out of14swg (2mm)Mssheet and25x25x3mm MSangle as per drawing and as directed by the field engineer including costof allmaterials(8kg/boardx4nos)

Fabrication and fixing of earth electrode identification board size 300x250mm out of 14SWG(2mm)MS sheet and 12mm dia MS round perdrawing and as directed by the field engineer including cost of all materials(2KG/ boardx17no)

Manufacturing and supply of fire protection stand of size2400HX1500W mm out of 40x40x6mm MS angle for frame 125x65mm MS channel for base 14SWG(2mm)MS sheet for hood as per drawing and as directed by the field engineer including cost of all materials

Manufacturing and supply of LC/key board of size 900mm,length675mm height made out of 75x25 mm aluminium frame embedded with 12mm prelaminated wood practical board using screws rear two nos of plain glass of 5 mm thick fixed with metal roller moving on alumunium channel should be provided on front with locking arrangements .glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm MSplate should be provided on top as per drawing and as directed by the field engineer including cost of all materials.

Manufacturing and supply of fire bucket of 10ltr capacity made out of 26(0.46mm)SWG MS sheet painted with white and red enamel paint inside and outside resply;Bottom of bucket shall be U shaped outside of the bucket shall be written as FIRE in english/Tamil in white enamel paint including cost of all materials

Fabrication supply and fitting of CT/PT junction box out of 14SWG (2.00mm) MS sheet where ever required as directed by field engineer .The box shall have sturdy hinges provision for mounting terminal blocks and locking arrangements including cost of all materials 400WX150DX300H

Fabrication supply and fixing of AC distribution box out of size 500WX250DX600H mm out of 14SWG(2MM) MS sheet whereever required as directed by field engineer .The box shall be vermin proof;shall have sturdy hinges, provision for mounting MCB and MCCB detachable gland plate and locking arrangements including cost of all materials

Manufacturing and supply of yard light box of size 200w X 175h X 150d mm out of 18 SWG (1.2mm) MS sheet with cable entry holes.Fixing arrangements for fuse units and mounting clamps dirceted by the field engineer including cost of materials.

Labour charges for removing rust primer coat first and second coat painting both sides and writing details in MS boards and R.S.Joists including cost of enamel paint (dulex, asian berger preferred) and other consumables as directed by the field Engineer.

Labour charges for writing details in finished surface boards including cost of enamel paint (dulex, asian berger preferred) and other consumables as directed by the field Engineer.

Labour charges for drawing layout and writing details in LC/key board including cost of enamel paint(Dulux,Asian,Berger preferred)and other consumables as directed by the field engineer

Supply and erection of B class GI pipe for extension of tandem/down pipe forAB switches and for any other work as required and directed by the field engineer including cost of Gi pipe 40mm dia

Supply and fixing of ISI mark bakelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 16 Amps

Supply and fixing of ISI mark backelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 32 Amps

Supply and fixing of ISI mark bakelite HRC rewirable fuseholder reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 63 Amps

Supply and fixing of ISI mark backlite HRC rewirable fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer.2/5/10 Amps

Supply and fixing of ISI mark backelite HRC rewirable fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer.63Amps

Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 15 Amps

Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 32Amps

Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed by the field engineer. 100Amps

Supply and fixing of AC 3 phase 4 pole 415V, 32A ISI mark change over switch of reputed make as required and directed by the field engineer.

Supply and fixing of mounting channel suitable for CBTM5 terminal block in panel/box as required and directed by field engineer

Supply and fixing of nut type CBTM5 terminal block in panelbox as required and directed by field engineer

Supply and fixing of disconnecting type terminal block for CT/PT circuits in panel box as required and directed by the field engineer.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.19mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.25mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.28mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.32mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer.35mm

Supply and termination of cable core end including cost of cable socket (Lugs), ferrules straps etc as per cable schedule and as directed by the field engineer.

Supply and fixing of (Godrej) 6 lever navotal lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed byfield Engineer.

Supply and providing of 600mm mean dia,300mm height,36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coat of colour wash as directed by field engineer.

Manufacturing and supply of sand drums made out if oil drum of size 580mm dia and 420mm height with conical cover made out of in sheet provided with handle including cost of barrel sand and consumables as direcyed by the field engineer.

Supply and fixing of ISI make MCB in Panels/Boxes of reputed make as directed by the field engineer.1Ph 16Amps

Supply and fixing of ISI make MCB in Panels/Boxes of reputed make as directed by the field engineer. 3Ph 32Amps

Supply and fixing of Copper tape/rope for interlinking panel earthing and for any other purpose of any size as directed by the field engineer

total of slno1 to 183

Contigencies @ 1 %

Labour Welfer fund @1%

Add ESI @ 3.25 % of 40 % work portion

Total

Total

M.JAYAVEL

JK ENGINEERS