Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted by the tenderer hence the tender is accepted. | |
| 2 | L2₹49.1 L+₹3.0 L (6.56%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted compare to lowest tenderer quoted rate. | |
| 3 | L3₹50.4 L+₹4.4 L (9.45%)Rejected-Finance 30 SOUTH PRAHARAM STREET THIRUVOTTIYUR CHENNAI 600 019 | THIRUVALLUR | TAMIL NADU | 600019 | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹45,870
Closing Date
12 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive engineer, PWD
Office of Executive Engineer PWD South Presidency Division chepauk chennai 05
Creation of Fact Check Unit under the Administrative Control of Special Program Implementation Department in Kalaivanar Arangam Omandurar Government Estate at Chepauk, Chennai-2.
2023_PWD_395144_1
TNPWD/18-01/205M/2023-2024
Open Tender
Civil Works
Lump-sum
90 days
Chepauk
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹45,870
30 May 2024
1 Dec 2023
12 Dec 2023
1 Dec 2023
12 Dec 2023
1 Dec 2023
Amount
Dismantling, removing and carefully stacking Doors & windows including removal of frames, hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.
Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.
Providing Fully Calcium Silicate HILUX BOARD partition using alu box section and aluminium frame at an interval of 0.75m at the aluminium frame of size 63.50mm x 38.10mm x 1.28mm, 1.41mm at 0.8158 kg/m wih necessary'L' Angles, Screws, nails and fixed in the wall using drilling machine with neat straight alignmnets etc., after finishing the frame work and fixed with Both side 12mm thick HILUX BOARD approved quaility and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch Box and AC plug Box and Telephone Box requirements and finally cleaning the wooden partition for both side with neat position etc. The partition both side should be finished with best wall putty and painting two coats of Interior emulsion paint over one coat of primer including preparaion of surface etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and paritition work, transporting charges etc., complete as directed by the departmental officers.
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using 100mm thick HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
50mm thick
100mm thick
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Providing nosing to the granite slab by cutting the granite slabs edges to required shap and size and polishing using hand machine and the nosing is made highly smooth and gloosy. The cost includes labour charges and cost of machineries and polishing charges etc, complete.
Brick partition walls of 11.50cm thickness using best quality II Class Ground Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including both side plastering 1:5, 12mm thick, curing etc. complete and as directed by the departmental officers
Second floor
Third floor
Flooring with Designed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with best approved quality, Designed colour ceramic tiles of size 450x300x8mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Renewing and refixing the WPC door shutters including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, etc., complete complying with standard specification.
Supplying and fixing in position PVC Trims (Corner Beading) etc., complete and as directed by the departmental officers.
Cleaning the surface thoroughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsequantly wash with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plastes and cured cement mass will be removed to make the surface clean and applying Gal tech CT epoxy virigen solvent free anti corrosive two pack resin 50 + Hardner 50 (1 coat) as primer impregnated with 110 GSM class cloth over that apply C.T. Epoxy two coats as finish that will for's FRB lining etc. complete and as direted by the departmental officers.
Brick Jelly Lime Concrete 1:2:5 using 20mm brick jelly in Lime Mortar 1:2 - 10 cu.m etc., complying with standard specification and as directed by the departmental officers.
Renewing and refixing with new design ornamental sound proof Armstrong grid false ceiling arrangements with alu. anodized T section and L angle frame work grid of size 60x60cm with Aluminium T section 25x25x2.8mm L angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S rods with suitable threaded nuts, suspended rod and hanging from ceiling at 1.20m c/c in longitudinal section and 60cm at middle portion 60x60cm panel should be covered with 12mm thick Armstrong sheet in grid so as to give neat finishing etc., complete complying with standard specification and as directed by the Departmental officers.
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work
Supplying and fixing in position white colour Special type Deluxe model Glazed Cascade Type wall mounted European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
Renewing the damaged broken unservicewable Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
Supplying and fixing Stainless steel coated towel ring 150mm dia meter with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers
Renewing the damaged broken unservicewable Wall mixer tap with new one of C.P. coated two in one wall mixer tap of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
Renewing and refixing the damaged mirror with new on of Special type of mirror of size 1.00mx0.60m of approved quality and brand PVC / Fibre Glass framed board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Supplying and fixing in position 15mm dia parryware SS Long body tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing Stainless steel coated towel rack 600mm long and 20mm dia meter with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers
Supplying and fixing in position Stainless steel sink of size 600x600x200mm including labour charges for fixing etc,. complete and as directed by the departmental officers.
Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.(schedule-40) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.
20mm dia UPVC pipe
Renewing and refixing following UPVC special of approved aulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
20mm dia elbow
20mm dia Tee
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
110mm dia PVC pipe
75mm dia PVC pipe
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
110mm dia
Elbow with door
Tee with door
75mm dia
Elbow
Supply and installation of Anutone or Equivalent Acoustic wall fabric stretch system by using FR Grade fabric of size 1700mm width, shall be stretched by using CC 25 with infill of synth pf 5X25 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 15mm (FS15) and Midseam 15mm (FS15), strand board, synth PF infill with requisite accessories & tools. CC 25 mm is first installed on the wall along with ithe marking lines with metal fasteners inserted at 300mm centers . FS15 tracks to be installed on wooden base, after applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks.Strand3 Fibre square edge magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 4kg which is fixed to wall with suitable fasteners. Synth PF 10x25mm thick adhered on strand panel by using Stick 7 adhesive. Fabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm. Technical parameters : Core - pinewoodfibre & polyfibre, Fire – 1, Acoustics – NRC 0.90, Climate (OC RH) – 49, 90, Termite resistance – Yes, Light reflectance – Colour dependent, Green (RC %) – 25, Hygiene (VoC, Clean room) – Low, Class 1So as to have an neat appearance as directed by the departmental offices. The cost includes cost of material, cost of Labours, scaffolding, Transportation, conveyance Etc., complete complying to standard specification. width would be 1600mm
Painting the old walls two coat of Interior Emulsion paint including cost of brushes, Labour charges scoffolding charges etc., complete complying with standard specification and as directed by the departmental officers.
Supply of Executive (3 SEATER SOFA ) of best approved quality, colour and brand including lifting charges and transportation, Labour charges and Fabric Material, any Colour, Frame of sofas made of durable wood and the base of seat and backrest equipped with metal Z-shape springs etc., Complete and as directed by the departmental officers.
DESK - 19mm plywood over the top and sides, full laminate finish inner and outer and designistic work aesthetically, Front and back 1mm laminates sheet finishing etc., Complete and as director by the departmental officers.
DOOR PLYWOOD- CENTURY /SOLID GOLD LAMINATES – CENTURY /BLU -1MM DOOR CLOSER - CNR BLOCK DOOR - CENTURY BLOCK DOOR 32MM 19mm plywood over the walls , full laminate finish inner and outer and soft closing shutters , modular handleless designistic work aesthetically , Front and back 1 mm laminates , 8mm toughened glass etc., Complete and as directed by the departmental officers.
ANTI DOOR & TOILET DOOR PLYWOOD- CENTURY /SOLID GOLD LAMINATES – CENTURY /BLU -1MM DOOR CLOSER - CNR BLOCK DOOR - CENTURY BLOCK DOOR 32MM 19mm plywood over the walls , full laminate finish inner and outer and soft closing shutters , modular handleless designistic work aesthetically , Front and back 1 mm laminates etc., Complete and as directed by the departmental officers.
Renewing the damaged vertical blinds with new horizontal zebra fabric roller blinds of superior quality double ply plinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,complete complying with standard specification and as directed by the departmental officers at site of work.
Executive chairs (W-600 X D-620 X H-880 mm) Fabric upholstered on tubular back frame, Upholstered seat cushion with moulded PU foam and Bent wood, Fixed arm rest made of polypropylene, Pushback mechanism with back tilt tension adjustment, tubular cantilever frame assembly etc., Complete and as directed by the departmental officers.
Visitor's chairs (W-600 X D-620 X H-880 mm) Fabric upholstered on tubular back frame, Upholstered seat cushion with moulded PU foam and Bent wood, Fixed arm rest made of polypropylene, Pushback mechanism with back tilt tension adjustment, tubular cantilever frame assembly etc., Complete and as directed by the departmental officers.
PANTRY TABLE - 19mm plywood over the top and sides , full laminate finish inner and outer and designistic work aesthetically , Front and back 1 mm laminates etc., Complete and as directed by the departmental officers.
OFFICE TABLE - 19mm plywood over the top and sides , full laminate finish inner and outer and designistic work aesthetically , Front and back 1 mm laminates etc., Complete and as directed by the departmental officers.
FILE STORAGE AND SERVER BOX - 19mm plywood over the walls , full laminate finish inner and outer and soft closing shutters , modular handleless designistic work aesthetically , Front and back 1 mm laminates ,CNC Cutting as the partition panel etc., Complete and as directed by the departmental officers.
SHELF - 19mm plywood over the walls , full laminate finish inner and outer. Front and back 1 mm laminates etc., Complete and as directed by the departmental officers.
PHOTOFRAME AND ARTIFACTS - Decorative items and wall photo frames in SP room office, MD room, Studio room, Work area as per the room decorum etc., Complete and as directed by the departmental officers.
Architectural design - Design and 3d views of all the rooms etc., Complete and as directed by the departmental officers.
Supplying and erecting in position of 50liters/Hr capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.
GST at 18%
N Ayyappan
RANI ENGINEERING & CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .