Repairing of existing sprinkler pipe line at coal stock yard surroundings at Amalgamated Yekona I and II OC Mine at Yekona Sub Area of Majri Area.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (Not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottom, for all lift including getting out of excavated soil and disposal of surplus excavated soil as directed within alead of 50 m. All kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) 50mm dia. nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) 32 mm dia. nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) 40 mm dia. nominal bore

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete Sluice valves - PN -1 (Without by pass) 80 mm

Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set for 7.5 to 10 HP consisting of DOL starter having relay range 28-42 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.PE-100 a) 6 Kg/Sq. cm : 63 mm dia Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form

Providing & Fixing GI TEE of Dia 80 x 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & Fixing GI TEE of Dia 50 x 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing GI Nipple of Dia 50x150 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing GI Elbow of Dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing HDPE Hoose Nipple GI of Dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing GI Flange of Dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing GI Flange of Dia 80 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing GI socket of Dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing GI Elbow of Dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing and fixing Hose pipe GI Clamp of dia 50 mm & Nut Bolt ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing Rain gun 32 mm dia & range 15 mtr redius ISI marked all complete as per the instruction of Engineer-In-Charge.

Providing & fixing G.I. Union of dia 50 mm ISI marked all complete as per the instruction of Engineer-In-Charge.

Deployment of excavator machine ( JCB or equivalent) including cost of opertator, one helper, deisel , mobil oil etc. for clearing jungle levelling, making approaches / road sides excavation and stacking the earth within a lead of 10 meter etc. all complete job as per instructions of E.I.

Lifting of submersible Borewell pipes upto 80 mtrs GI Pipes of 50 mm dia from casing including chain pulley and all other necessary tools etc

Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II For all classes 63 mm dia

Total impact of GST for the purpose of CTC

SANTOSH KHOLGADE (BID ID -1151415)

SURYANATH YADAV (BID ID -1152134)