Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹37.6 L+₹18,305 (0.49%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹42.9 L+₹5.5 L (14.6%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹43.9 L+₹6.5 L (17.3%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹45.0 L+₹7.5 L (20.1%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
COMPREHENSIVE REPAIR INCLUDING PERIODICAL SERVICES IN OTM ACCN OF 150 GH OF AGE B/R DETT-III UNDER GE 862 EWS
2023_MES_632812_1
GER-77/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹1 L
Yes
13 Feb 2024
14 Dec 2023
13 Jan 2024
14 Dec 2023
11 Jan 2024
28 Dec 2023
Amount
M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls, pillars, cornices etc, complete all as specified and directed.
All as per srl item No 1 above but on ceiling complete all specified and directed.
M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces on walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying with one coat of oil emulsion distmeper, after filling holes with putty, complete all as specified and directed.
All as per srl item No 3 above but on ceiling complete all specified and directed.
complete removal of existing treatment over walls, perparation of surface to receive the treatment and applying two coats of distemper oil emulsion over a coat of wall care putty 1.5mm thick, complete all as specified and directed.
M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted steel surfaces (including old trusses & roofs) of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old plastered surface of walls complete removal of existing treatment over walls, perparation of surface to receive the treatment and applying two coats of cement base paint, complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work / stone surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work / stone surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surface such as chajjas, roof facias, fins etc, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resitant primer, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall care putty 1.5mm thick, complete all as specified and directed.
M&L for preparation of old plasterd wall surface and applying one coat of exterior emulsion all weather proof paint (apex), complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble PVC lining, complete all as specified and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall lining including dismantling of old unserviceable PVC fillets, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
M&L for vitrified tiles light shade (premium quality) 9-10 mm thick (square/ rectangular) as in skirting / dado polished, area of each tiles n. exc 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in path/ sub base, to receive tiles etc, surface finished even and rough, complete all as specified and directed.
M&L for 50mm thick plain cement concrete, type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 20-22mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 of any size after dismantling old unserviceable of kota stone, complete all as specified and directed.
S&F in repair for overhead PVC water tank lid threaded or plug type suitable for 500/1000 ltr water tank capacity , complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
M&L in repair for overhead PVC tank cleaning of any capacity and refixing at same place including required fittings (PVC ball valve with brass rod 15mm dia, tank nipple etc, complete all as specified and directed.
S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after hacking out old broken glass all as specified and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down old GI tubing 15 mm bore and connections, complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors including taking down old GI tubing 20 mm bore and connections, complete all as specifed and directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall of bore 75 mm type 'B' complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bend any radius , complete all as specifed and directed by Engr-in-Charge.
S&F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor or fixed to wall of bore 110 mm type 'B' complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius with access to door, complete all as specifed and directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) bend any radius with access to door, complete all as specifed and directed by Engr-in-Charge.
S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.
S&F in repair vitreous china coloured, counter top wash hand basin, oval type, size 550mm including cutting for and pinning but excluding waste pipe, complete all as specified and directed.
S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including fixing bolts, flushing cistern 10 ltr capacity and flush pipe, seat covers, complete all as specified and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe, complete all as specified and directed.
S&F in repair for plastic water closet seat, black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device screw, bolts etc, complete all as specified and directed.
S&F in repair for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, complete all as specified and directed.
S&F in repair for PTMT speader for urinals 15mm bore of any colour (minimum wight 60 gms), complete all as specified and directed.
S&F for towel rack 600mm long with lower hangers by replacing the existing tower rail etc, complete all as specified and directed.
S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S&F in repair for CP brass hand shower (Health Faucet) with 1.0 meter long PVC tube & wall hanger with decorative choice fixed to angle valve, complete as specified and directed by Engr-in-Charge.
S&F in repair for copper alloy chromium plated jet spray with 1.00m long stainless steel flexible tube, decorative choice fixed to iron pipe, complete all as specified and directed by Engr-in-Charge.
S&F in repair for PVC waste pipe 600/900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.
S&F in repair for 15mm bore, swan neck pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated brass wall mixers 2 in 1 two for hot and cold water mixing and one for shower rose screwed down for iron pipe as suitable to exisiting site , complete all as specified and directed.
S&F in repair for 15mm bore, pillar tap cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for rectangular glass shelf (with SS bracket) glass shelf 300 x 100mm long, complete as specified and directed by Engr-in-Charge.
S&F in repair for brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union, complete all as specified and directed.
S&F in repair for 15mm bore Stop valve (concealed type), chromium plated, fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated fancy type, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair for 15mm bore Angle valve, chromium plated, fency type cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
M&L in repair for gun metal / glove or gate valves with iron wheel head screwed both end for iron pipes of 15 mm internal bore, complete all as specified and directed.
M&L in repair for gun metal / glove or gate valves with iron wheel head screwed both end for iron pipes of 20 mm internal bore, complete all as specified and directed.
S&F in repair for chromium plated grating doom for 75/100mm bore floor trap and fixed with white cement, complete all as specified and directed.
S&F in repair for PTMT shelf (minimum weight 300 gm) including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F in repair for towel rail 18 mm dia "D" type 60 cm long of made of stainless steel tubes of minium thickness 0.75mm, decorative type fixed with scewa and wooden / plastic cleats,complete all as specifed and directed.
S&F in repair for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 45 gms), complete all as specified and directed.
S&F in repair for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 485mm x 420mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.
S&F in repair for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.
S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm squre support pipes, dedicated holes for spoon, pegs etc cover all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.
S&F in repair for mirror cabinet of plastic body of size 400x500mm, including shelves, mirror of slected quality glass, etc heavy duty, complete all as specified and directed by Engr-In-Charge.
S&F in repair for looking mirror of size 450x600mm, with plywood backing and aluminium frame, complete all as specified and directed by Engr-In-Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.
Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and removing, complete all as specified and directed.
S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 1 Nos floor door stopper, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square exc 0.5 sqm in each pane, complete all as specified and directed.
M&L for block boards 18/19 mm thick Grade-II interior grade commercial type with decorative face veneer on both faces, fixed with screws including 6mm thick teak wood lipping as in cup boards (ISI Marked), complete all as specified and directed.
S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed (ISI Marked), complete all as specified and directed.
M&L in repair for 300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate welded to steel frame, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed.
Dismantling of asbestos cement / CGI sheets corrugated in roof covering, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws/ "L" or "J" hooks including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.
Dismantling structural steel work including welded fabricks frame, doors, gates, grills grating and framed truss etc, complete all as specified and directed.
M&L for rolled section as in main and cross beam / columns, hip and jack, rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates (Fe-410W Gde E-250 Quality A) complete all as specified and directed.
ASHFAQ AHMED MANHAS
BAKSHI DEVI DASS AND SONS
M/s Anil Engineers & Builders
NATIONAL TRADING COMPANY
VIJAY KUMAR SURI AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .