REPAIR MAINTENANCE OF MULTI STAGE VERTICAL AND HORIZONTAL SUBMERSIBLE PUMPS, HORIZONTALAND VERTICAL CENTRIFUGAL PUMPS, STARTERS, SUBMERSIBLE 3 PHASE CABLES, AND PRIMING PUMPS INSTALLED AT WATER SUPPLY INSTALLATIONS AT PARADE ROAD, NAGZEERA, LAXMITEK

Amount

Taking down & Disconnecting existing Centrifugal pump of capacity 10HP of any make and model from motor and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening, repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc., and reassembling, with and including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position, making all connections, commissioning & testing for smooth and noise free operation, complete all as specified and as directed. Notes: Unserviceable Spare Parts such as bearing, shaft, impeller, bush, Gland plate etc., shall be measured & paid separately under relevant items of BOQ as supply only. The required T&P and vehicles for transportation of pump shall be arranged by the contractor and the cost in this effect shall be deemed to be included in the quoted rate.

Supply only Shaft Sleeve Suitable of capacity 10 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 10 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 10 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 10 HP as per sample

Supply Only stamping core suitable for 10 HP motor

Supply Only rotor assembly suitable for 10 HP motor

Supply Only starter assembly suitable for 10 HP motor.

Supply only bearing plate suitable for 10 HP motor.

Supply Only terminal with cover suitable for 10 HP motor

Supply Only main body cast iron suitable for 10 HP motor

Taking down & Disconnecting existing Centrifugal pump of capacity 20HP of any make and model from motor and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening, repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc., and reassembling, with and including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position, making all connections, commissioning & testing for smooth and noise free operation, complete all as specified and as directed. Notes: Unserviceable Spare Parts such as bearing, shaft, impeller, bush, Gland plate etc., shall be measured & paid separately under relevant items of BOQ as supply only. The required T&P and vehicles for transportation of pump shall be arranged by the contractor and the cost in this effect shall be deemed to be included in the quoted rate.

Supply only Shaft Sleeve Suitable of capacity 20 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 20 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 20 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 20 HP as per sample

Supply Only stamping core suitable for 20 HP motor

Supply Only rotor assembly suitable for 20 HP motor

Supply Only starter assembly suitable for 20 HP motor.

Supply only bearing plate suitable for 20 HP motor.

Supply Only terminal with cover suitable for 20 HP motor

Supply Only main body cast iron suitable for 20 HP motor

Taking down & Disconnecting existing Centrifugal pump of capacity 30HP of any make and model from motor and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening, repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc., and reassembling, with and including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position, making all connections, commissioning & testing for smooth and noise free operation, complete all as specified and as directed. Notes: Unserviceable Spare Parts such as bearing, shaft, impeller, bush, Gland plate etc., shall be measured & paid separately under relevant items of BOQ as supply only. The required T&P and vehicles for transportation of pump shall be arranged by the contractor and the cost in this effect shall be deemed to be included in the quoted rate.

Supply only Shaft Sleeve Suitable of capacity 30 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 30 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 30 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 30 HP as per sample

Supply Only stamping core suitable for 30 HP motor

Supply Only rotor assembly suitable for 30 HP motor

Supply Only starter assembly suitable for 30 HP motor.

Supply only bearing plate suitable for 30 HP motor.

Supply Only terminal with cover suitable for 30 HP motor

Supply Only main body cast iron suitable for 30 HP motor

Taking down & Disconnecting existing Submersible pump of capacity 20HP of any make and model deep bore well / open well upto 30m depth by dismantling pump & motor separetly and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening, repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc., and reassembling, with and including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position, making all connections, commissioning & testing for smooth and noise free operation, complete all as specified and as directed. Notes: Unserviceable Spare Parts such as bearing, shaft, impeller, bush, Gland plate etc., shall be measured & paid separately under relevant items of BOQ as supply only. The required T&P and vehicles for transportation of pump shall be arranged by the contractor and the cost in this effect shall be deemed to be included in the quoted rate.

Supply only Shaft Sleeve Suitable of capacity 20 HP Submersible Pump Set as per existing sample.

Supply only Oil Seal Suitable of capacity 20 HP Submersible Pump Set as per existing sample.

Supply only Gland Plate with complete MS Nut & Bolts Suitable of capacity 20HP Submersible Pump Set as per existing sample.

Taking down & Disconnecting existing Submersible pump of capacity 10HP of any make and model deep bore well / open well upto 30m depth by dismantling pump & motor separetly and all water /electrical connections and removing/taking up from foundation, taking to civil authorised dealer workshop for repair/strip opening, repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc., and reassembling, with and including oiling, greasing replacement of worn out nuts, bolts, gasket etc, and re-fixing in its original position, making all connections, commissioning & testing for smooth and noise free operation, complete all as specified and as directed. Notes: Unserviceable Spare Parts such as bearing, shaft, impeller, bush, Gland plate etc., shall be measured & paid separately under relevant items of BOQ as supply only. The required T&P and vehicles for transportation of pump shall be arranged by the contractor and the cost in this effect shall be deemed to be included in the quoted rate.

Supply only Shaft Sleeve Suitable of capacity 10 HP Submersible Pump Set as per existing sample.

Supply only Oil Seal Suitable of capacity 10 HP Submersible Pump Set as per existing sample.

Supply only Gland Plate with complete MS Nut & Bolts Suitable of capacity 10HP Submersible Pump Set as per existing sample.

M&L for Re-winding of 3 phase submersible / centrifugal pump set motor of any capacity & any make by removing burnt copper winding and rewinding with supper enamelled copper winding wire of suitable gauge as per existing size and number of turns, providing insulating materials such as nylon tape, varnishing and baking testing and commissioning, complete all as specified and as directed.

Dismantling and taking out submersible pump set of any type / size from deep bore well/open well up to 30 metre depth and dismantling of bowl assembly of any type / size and cleaning, descaling, painting inner/ outer to anticorrosive paint and reassembling after necessary repair /overhauling and lowering making proper alignment and connecting to water source , testing and commissioning for available yield for the entire satisfaction of EIC, complete all as specified and as directed.

Dismantling and taking out centrfugal pump set of any type / size from foundation and dismantling of bowl assembly of any type / size of cleaning, decaling, painting inner/ outer to anticorrosive paint and reassembling after necessary repair /overhauling and lowering making proper alignment and connecting to water source , testing and commissioning for available yield for the entire satisfaction of EIC, complete all as specified and as directed.

S&F IN REPAIR MCCB 3Pole, 415Volt, 400Amp, breaking capacity 36kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed.

All as per Serial Item No. 45 here in before but for MCCB of 200Amp capacity.

All as per Serial Item No. 45 here in before but for MCCB of 160Amp capacity.

All as per Serial Item No. 45 here in before but for MCCB of 125Amp capacity and breaking capacity 16kA.

All as per Serial Item No. 45 here in before but for MCCB of 63/100Amp capacity and breaking capacity 16kA.

S&F IN REPAIR MCB TP 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, with and including taking down old u/s MCB of any type, complete all as specified and as directed.

All as per Serial Item No. 50 here in before but for MCB SPN 40 to 63Amp capacity.

All as per Serial Item No. 50 here in before but for MCB SPN 32Amp capacity.

All as per Serial Item No. 50 here in before but for MCB SP 0-32Amp capacity.

S&F IN REPAIR Power Contactor MNX-18, TP, 18Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94100, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-22, TP, 22Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-32, TP, 32Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-40, TP, 40Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-50, TP, 50Amp, 415Volt of coil voltage 220Volt with aux contact 2 No+2NC, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-70, TP, 70Amp, 415Volt of coil voltage 220Volt with aux contact 2No+2NC, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-9, for MNX contactor, delay range 1.4 to 2.3Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-18, for MNX contactor, delay range 3 to 5Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-22, for MNX contactor, delay range 4 to 7.5Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-25, for MNX contactor, delay range 6 to 10Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-32, for MNX contactor, delay range 9 to 15Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-40, for MNX contactor, delay range 14 to 23Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Single Phase Preventer suitable for 380Volt, AC, with and including taking down old u/s single phase preventer, complete all as specified and as directed.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 3.0core x 16.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 4.0core x 10.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 4.0core x 6.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

S&F IN REPAIR Star Delta starter, fully automatic with single phase preventer suitable for 3 Phase electric driven pump set of 30HP capacity of existing make & model, with and including taking down old u/s star delta starter of any description, complete all as specified.

S&F IN REPAIR Star Delta starter, fully automatic with single phase preventer suitable for 3 Phase electric driven pump set of 17.5HP capacity of existing make & model, with and including taking down old u/s star delta starter of any description, complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Dry & clean tibba river sand cushioning in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable, levelled and punned down to a depth of 100mm above the top of the upper-most cable, for cable protection in trenches, complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.

M&L for Well burnt old size sub Class ‘B’ bricks, laid dry & flat in trenches for cable protection, complete all as specified.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 3.5core x 35.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

All as per Serial Item No. 77 here-in-before but for cable of size 3.5Core x 50.0Sqmm.

All as per Serial Item No. 77 here-in-before but for cable of size 3.5Core x 70.0Sqmm.

All as per Serial Item No. 77 here-in-before but for cable of size 3.5Core x 90.0Sqmm.

S&F IN REPAIR LED Indicator lamp (RED / YELLOW/BLUE), input voltage range 220-240V, AC, complete all as specified.

S&F IN REPAIR FRLS cable tray of size 120mm B type, with cover for fixing XLPE cables at various places to accommodate the cables, fixed with necessary bends, angles, supports for fixing etc., complete all as specified and as directed.

Supply, laying, testing and commissioning of chemical dosing pump system electromagnetic, diaphragm type with accessories like foot valve, NRV, suction and discharge tube and capacity of 6 lph / 10 kgs pressure with and including Dosing system of 100 litres capacity FRP solution preparation cum settling tank fitted with lid, inlet/ outlet connection, sludge deposition facility and SS 316 agitator, with and including taking down old u/s dosing pump & system, complete all as specified and directed. Make of Dosing Pump- RMCO model RC -13 and Dosing system: RMCO model CDS -100 or equivalent in make specified here in after.

M&L for Rolled mild steel framed work, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, slice valve pit cover and frame, sheet, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing confirming to Fe 290 E -165, with and including dismantling old steel work of any description, complete all as specified and as directed.

M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25mm x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 25mm x 4mm GI earth strip, including testing after completion, complete all as specified and directed. Note : Quoted rate shall be inclusive for Earth strip upto 7.5m.

M&L for Applying one synthetic enamel paint with and including preparation old steel surface of the Pumps and motor after scraping /removing the existing paint/rust /dirt on the surface pipe and marking the water flow direction on pipe by Blue paint, complete all as specified and directed.

DHAIRYASIL RAMAKANT DESAI (BID ID -3274210)

Green Ray Enterprises (BID ID -3273694)

star freeze service (BID ID -3278683)

M/S MAHADEV M PATIL (BID ID -3276732)

M/s.GOODWILL ELECTRICALS (BID ID -3278553)