REPAIR TO BRICK WORK, JOINERY, PAINTING, PLUMBING, ROOFING, FLOORING AND OTHER MISC REPAIRS IN BLDGS OF ARMY UNITS AT RAMBAN, BANIHAL, PATNITOP AND NATHATOP UNDER GE (I) 873 EWS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 350mm x 250mm x 7mmour tiles etc.) in vertical surfaces of size 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick screed bed in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing & complete all as specified & directed.

Black Granite (of any type) tiles 18-20mm thick, machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface, complete all as specified & directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No. 2.00 above, but except brick

Brick work with sub-class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick, built in cement mortar 1:4, complete all as specified & directed.

Preparation new plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of walls and applying 3mm thick wall care putty, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of primer complete all as specified and directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Preparation new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparation new plastered surfaces of ceiling and applying two coats ofwhite wash complete all as specified and directed.

Preparation old plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spotand applying one coat of oil emulsion distemper complete all as specified and directed.

Preparation old plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spotand applying one coat of cement base paint complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed.

6mm thick Asbestos cement corrugated or semi-corrugated sheets in roofs, walls etc., fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed.

Asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets, 6 mm thick, fixed with ‘L’ or ‘J’ type hooks, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated), conforming to Fe-410-W (Gde-E-250) Quality-A complete all as specified & directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and directed.

0.63mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

6mm thick non asbestos fibre cement building boards laid / inserted to GI frame work comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

5mm Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Dismantling of timber scantling 40sqcm and over in section unframed work, as in any position complete all as specified.

Second class hard wood as in scantling, clean sawn fixed in position with nails, framed work, complete, all as specified and directed.

Plain wooden fillets of 2nd class hardwood,sectional area exc 6 sqcm and n. exc 13 sqcm square or rectangular in section, clean sawn, secured with nails or brads, bullnosed, splayed, chamfered or rounded on one edge or face fixed in repairs, complete all as specified.

6mm thick 5 Nos of ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete, all as specified and directed.

6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work, fixed in ceiling, flat or sloping complete, all as specified and directed.

12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Powder Coating (minimum thickness of powder coating 50 micron) aluminium annodised frame for door/ window/ ventilator with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Powder Coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Door closure hydraulically regulated designation No. 2 universal type of aluminium (die cast) body, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kilogam and fixed in repairs, complete all as specified and directed.

Aluminium body fanlight pivot with plate size 25mmx 65 mm and suitable for shutter of 35mm thickness and fixed in repairs, complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and fixed in repairs, complete all as specified and as directed.

Floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, fixed in repairs, complete all as specified and directed.

100mm mortice lock, vertical type with 4 lever, brass fixed in repairs complete all as specified

Taking down shutter of any description, area exceeding 1.00 Sqm and not exceeding 2.00 Sqm each all as specified and directed.

Taking down shutter of any description, area exceeding 2.00 Sqm each all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

35mm thick 2nd class Hard wood factory made rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.

Ditto all as per item No. 59.00 above, but without interlocking rail and with one panel only

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and aperture 1.00mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and aperture 1.00mm and fixed with tinned tacks or galvanized wire staple, fixed in repairs, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Mild steel barrel tower bolt of stove enamelled black with bright bolt and fixed complete of size 200mm long complete all as specified and directed.

Aluminium handles, cast type, anodised handles of size 150mm, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 250mm long, complete all as specified.

Floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete with glazing bars dovetailed or welded including locking arrangement, complete all as specified and directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete without glazing bars dovetailed or welded including locking arrangement, complete all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified & directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Discnnecting of existing water tank capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity including taking down old, complete all as specified and directed.

Discnnecting of existing water tank capacity 1000 ltrs and removing from site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity including taking down old, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above 250 litre but upto 500 litre, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above 501 litre but up to 1000 litre, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above 1000 litre, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe fixed in repairs complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 15mm bore dia of pipe (Minimum weight 142gms), fixed in repairs, complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), fixed in repairs, complete all as specified and directed.

Stop valve CP, cast copper alloy with capstan head, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Stop valve CP, cast copper alloy with capstan head, fancy type, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union, fixed in repair, complete all as specified and directed.

Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified.

PVC connection 450mm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes fixed in repairs, complete all as specified and directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repair, complete all as specified and directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair, complete all as specified and as directed.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.

Brass CP wash hand basin mixer, for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

Health Faucet, ABS body with 1 metre SS braided connection pipe for 15 mm bore pipe, fixed in repairs complete all as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous China urinal bowl type of size 465mm x 355mm x 265mm white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall, securing urinal to plugs, pointing around and making connection to flushing pipe and outgoing pipe, (excluding flushing cistern, flush pipe and waste pipe), fixed in repairs, complete all as specified and directed.

32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, fixed in repairs, complete all as specified & directed.

32mm bore PVC flexible waste pipe for WHB, flushing, sink and urinal -1metre long complete all as specified & directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Cleaning the blockage in IWC, EWC including rodding of CI pipe after opening the oval access door of CI bend, chamber etc. upto septic tank and including replacing the chamber cover etc. in position and removing the rubbish to a distance not exceeding 50mtr outside cantonment complete all as specified and directed.

R C TRADERS

BALVINDER SINGH AND SONS

Bidder Name

M S BANSI LAL CONSTRUCTION CO

BALVINDER SINGH AND SONS

R C TRADERS