SPECIAL REPAIR TO ROAD AT MES IB GE COMPLEX AND OTHER LOCATION AT KALIMPONG UNDER GE 867 EWS

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm, depth exceeding 50mm and not exceeding 100mm and segregation materials stacking for reuse and remove from the site of work complete all as specified and as directed.

M&L 7.5 cm thick (Compacted thickness) WBM with granite, trap or basalt etc, coarse aggregates of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required using 8-12 tonne power road roller complete all as specified and directed.

M&L premix bituminous macadam using paving bitumen Gde VG-10 any penetration content @ 4% by weight of total mix laid/rolled and compacted to required gradient and camber with 8-12 ton power road roller and rolled to a uniform smoth surface (consolidated thickness 75 mm or less) including preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat on black top surfaces with paving bitumen (VG-10) @ 5.00Kg/10Sqm complete all as specified and as directed.

M&L repair to pot holes exe 30mm depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L preparing unsurfaced water bound macadam by brushing with Wire Brushes for removing Caked, Mud, etc., Sweeping with Brooms and finally Fanning the Cleaned Surface with Gunny Bags to remove all loose dirts, etc. and applying evenly a priming/tack coat with bituminous primer (VG-10) @ 10kg/10 sqm complete all as specified and as directed.

M & L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/tack coat on black top surfaces with paving bitumen (VG-10) @ 5.00Kg/10Sqm complete all as specified and as directed.

M&L 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cum per 10 Sqm of stone chipping & mixed with 29.20 kg per 10 sqm of binder (paving bitumen VG-10) laid and rolled with 8 to 10 tonne power road roller and compacted to required camber and gradient complete all as specified and directed.

M&L liquid seal coat by applying paving bitumen grade (VG-10) @ 6.8 kg per 10 Sqm blinded with 6.3 mm size stone chipping @ 0.06 cum per 10 Sqm & rolled to a uniformed smooth surface by 8 to 12 tonne power road roller complete all as specified and directed.

Demolition of old cement concrete in ground floor and pavings not exceeding 15cm thick (un reinforced) and removing debris from site of work complete all as specified and directed.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

S&F road stud aluminium alloy/ polycarbonate body with stem size 100mm X 100mm X 25 mm thick with two side retro reflected type fixed with self adhesive as per manufacturer instruction complete all as specified and as directed.

M&L for applying retroreflected thermoplastic road marking paint upto 10cm wide in road edges with 2.75 mm or more thickness, applied using mechanically propelled vehicle consisting heated hopper mounted on a pram, which feeds hot molten thermoplastic under gravity to a retangular screed with a gate at the base whose opening is set to produce the thickness specified complete and as directed.

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

SANJAY SAW MILL

MS MAYA PRAKASH GOEL AND SONS

SANJAY MITTAL