Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹8,900
Closing Date
13 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive officer SANKARAPURAM TOWN PANCHAYAT
Executive officer SANKARAPURAM TOWN PANCHAYAT
Repair and maintance of community toilet at Sankarapuram Colony in sankarapuram town panchayat
2023_DTP_366627_1
A1/252/2023-1
Open Tender
Civil Works - Others
Works
90 days
SANKARAPURAM TOWN PANCHAYAT
Refer Tender Notice
1 document required · 1 mandatory
₹0
₹8,900
Yes
14 Sept 2023
5 Sept 2023
14 Sept 2023
5 Sept 2023
13 Sept 2023
5 Sept 2023
Amount
Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton soil, hard red, earth mixed with 50% fair sized boulders and hard gravelly soil and depositing on bank with initialed and lift as per SS 20A inclusive of shoring strutting waling and bailing out water where ever necessary forming protective bunds, coffer dams and including refilling charges around and all other incidental charges etc., complete complying with standard specification for foundation SS. No. 23 SSRB.
Cement Concrete 1:4:8 mix using 40 mm ISS HBG Jelly including cost & conveyance of all material to site and all labors etc complete.
Brick work in Cement Motor 1:5 using country bricks of size 8 3/4x 41/4x 21/4 including cost and conveyance of all materials to site from approved sources including cost of cement which will be supplied by the contractor own cost of stipulated under special condition, including the conveyance of cement from the departmental saction stores to work site and bandling charges for the same at both ends including labour charges for mixing cement mortor including safolding charges extra labour for working in heights and watering and curing with all leads for good soft potable water and including all other incidental charges etc.complete complying with standard specifications.
Supply and fabrication of steel including cost and conveyance of steel and labour charges for cutting, bending, grilling, tying and fixing in position as per standard specification.
Centering for sides and soffiots including necessary supports and strutting as directed by the departmetal officers. Rate for 10m2 for the following items (RCC floor slab, Rectangular/ Square, Tee/ Ell beams. Lintels. 1) Plain Surface and Roof
Centering for sides and soffiots including necessary supports and strutting as directed by the departmetal officers. Rate for 10m2 for the following items (RCC floor slab, Rectangular/ Square, Tee/ Ell beams. Lintels. 2) Column
Rainforcement CC 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and favricative charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roofs 1)Below Basement
Rainforcement CC 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and favricative charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roofs 2)Ground Floor ( Basement + Ground Floor)
Ceiling Plastering with cement mortor 1:3 mix to 10mm thick for RCC . Items including cost and conveyance of all materials to site and all labour charges etc completed
Plastering with C.M 1:5 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.
Providing Granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS HBG metal to 20mm thick including cost and conveyance of all materials to site and all round charges for mixing, laying and curing etc., complete
Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm finished thickness with c.m 1:3-20mm Tk and polished with same color cement including all cost and convene of all materials etc.,complete
Dadooring the sides of the wall up to the required height and approved quality colour printed Glazed tiles of size 305x200x3 mm and set in CM 1:2 , 10mm thick and pointing with same colour cement of 4kg including cost and conveyance of all materials.
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers. a ) Doors
Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.
Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil)SD 18
Drilling of borewells of size 6" to 8" dia. in sedimentaryformation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the TWAD Board Officers.
Towards Cost & Supply of 165 mm dia PVC Casting pipe including all cost & Conveyance of all materials and labour charges etc., Complete. 1) Without Slot
Towards Cost & Supply of 165 mm dia PVC Casting pipe including all cost & Conveyance of all materials and labour charges etc., Complete. 1) With Slot
Towards labour charges for inserting of casing pipe with and without slot pipe 165mm dia including cost & conveyance of all materials to site and all lobour charges etc.,complete..
Supply and delivery of 1 HP( 15 x 70 lpm x m ) 150 mm dia bore well submersible motor with pump set including all lab our charges etc., complete.,
Supply and delivery of 1 HP single phase panel board with automatic including cost & conveyance of all materials to site and all labour charges etc,. complete.
Supply and delivery finishing of UPVC 65mm dia including loading, unloading transportation and labor charges for finishing of G.I pipe and specials for pi[e connection works including charges as directed by department.,
Supply and delivery cable wire 2.5 sq.mm 3 core submersible copper cable including all charges etc., complete complying with standard specification.
Supply and delivery of MS kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx3mm around covered with 18 gauge MS sheet and kiosk door made up of MS plates of size 25mmx3mm including, locking arrangements and labour charges etc., complete
Supply Run off 4 to 6 sq mm ploythene insulator and sheathed (Heavy Duty) service meter Aluminum cable of 1100 grade on bearer wire for service connection main (SD 68)
Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD 71)
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
DHAANISH BUILDERS
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .