Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.3 Cr
EMD Value
₹3.4 L
Closing Date
26 Aug 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Upper Krishna Rehabilitation and Resettlement
S B Shegunasi
Construction of Shelter in Burial Ground at 1) Bilagi Cross-IV, 2) Yalligutti RC, 3) Honnihal RC, 4) Kandagalla RC, 5) Yatnatti-Badaradinni RC and Construction of Crematorium Building in Burial Ground at 6) Bilagi Cross-IV, 7) Yalligutti RC, 8) Honnihal RC, 9) Kandagalla RC, 10) Yatnatti-Badaradinni RC and Construction of Ranga Mandir at 11) Bilagi Cross-IV RC, 12) Yatnatti RC, 13) Badaradinni RC and Construction of ELSR at 14) Yatnatti RC, 15) Badaradinni RC and Construction of Two room school building (Extra) at 16) Bilagi Cross-IV RC and Construction of Toilet in School ground at 17) Yalligutti RC of Bilagi Tq of Bagalkot Dist (Package-9)
UKPRR/2024-25/BD/WORK_INDENT25
UKPRR/2024-25/BD/WORK_INDENT25
Open
Buildings
Two Tender Document System(Two Cover)
UKPRR Executive Engineer Office Div No 3 Jamkhandi
8 documents required · 8 mandatory
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Valid EPF and ESI Registration Certificate
The intending bidder should have satisfactorily completed (90% of the contract value), as prime Contractor, at least one similar work of such as Road work of value not less than 50% of the amount put to tender, ie., Rs. 113.00 Lakhs during last 5 years reckoned back from 2023-24. The Certificate should be obtained from the officer not below the rank of Executive Engineer of the Concerned Division/Equivalent officer. The cost will be updated to the present value by giving weightage of 10% each year, If the work is completed prior to the year 2023-24. Note-Similar work means: Building work.Workdone Certificate to be uploaded should have following information:1)Date of Agreement Date 2)Agreement period in Months 3)Contract/ Agreement value Rs in Lakhs 4)Amount of work executed Rs in Lakhs 5)% of Fin. Progress w.r.t. Contract value 6)Date of completion of work The workdone certificate issued should have the countersignature of concerned Superintending Engineer
The intending bidder should have executed a minimum quantity of following Items of work (Usually 80% of Peak annual rate of Construction in any one financial year, during the last five financial years reckoned back from 2023-24. Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division/Equivalent. Bidder should produce the work done certificates with yearwise breakup of quantity and it is mandatory. Earth work/Murrum 1755.00 m3 RCC/PCC 801.00 m3 TMT Steel 54.00 Masonry 294.00 m3 The workdone certificate issued should have the countersignature of concerned Superintending Engineer
A valid copy of registration certificate as Class-I & above Civil Registered Contractor of KPWD of state Government (License shall be within the validity period otherwise it will be rejected).
Technical staff organization chart
The bidder should have achieved a minimum financial turnover not less than Rs. 449.00 Lakhs (not less than two times the estimated amount ie., (Rs. 449.00 Lakhs) in at least two financial years during the last 5 years reckoned back from 2023-24 duly updating the financial turnover at 10% per annum. Audited profit and loss statement certified by a practicing Chartered Accountant along with copies of IT returns filed for the two years indicated above shall be furnished. C A CERTIFICATES SHALL BEAR THE UDI NUMBER
BID CAPACITY:The bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available bid capacity is calculated as under:Assessed available Bid Capacity:(AxNx1.5-B) where A-Maximum value of Civil Engineering works executed in any one year during the last five years (Updated to 2024-25 price level) taking into account the completed as well as works in progress. N-Number of years ie.,0.50 year (06 months) prescribed for completion of works for which bids are invited.B-Value, at 2024-25 price level, of existing commitments and on-going works to be Completed during the next 0.50 year (period of completion of the works for which tenders are invited) Note-1 The statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of Executive Engineer or equivalent. Note-2 Even though the bidders meet the above criteria, they are subject to be disqualified if they have: 1) Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements, and/or 2) Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc, and/or 3) Participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. 4) If the bidder/bidders have participated in more than one work, the available tender capacity will be assessed and number of works will be awarded as per his available bid capacity
Defect liability period will be 2 years from the completion of the work(After the issue of Completion Certificate)
GST Certificate 1-The successful bidder shall furnish at the time of concluding the agreement within 15 days from issue of work order (1) Copy of Income Tax returns filed mentioning PAN and TAN for the financial year 2024-25 (Assessment year 2023-24) and (2) Copy of GST Registration Number/ Certificate, failing which the EMD amount will be forfeited and the contract will be rescinded at his risk and cost and liable for penal action including black listing. 2-The amount put to tender is inclusive of GST(rates are inclusive of 18% GST) and the tenderer should quote the rates including GST. The increase in GST shall not be paid in extended period of contract for which reasons for delay are attributable to the contractor as determined by the authority while granting the extension of time
As per order of Dept of Mines and Geology GoK vide letter No 2023-24 dt07-11-2023 it is mandatory for the contractor to produce Mineral Deposit Permit (MDP) before submitting the work bill for the quantities (Minerals) executed in the work. If not produced, necessary penalties will be levied as per above order
The requisite Earnest Money Deposit in e-cash
Each bidder should furnish liquid assets and or/availability of credit facilities not less than Rs.75.00 Lakhs (credit lines/letter of credit/certificate from the banks for meeting the fund requirement etc) (usually the equivalent of the estimated cash flow for 3 months in the peak construction period.)
₹5,000
₹3.4 L
1 Aug 2024
1 Aug 2024
28 Aug 2024
21 Aug 2024
23 Aug 2024
Construction of Shelter in Burial Ground at Bilagi Cross-IV, Yalligutti, Honnihal, Kandagalla, Yatnatti-Badaradinni RCs and Crematorium Building in Burial Ground at Bilgi Cross-IV, Yalligutti, Honnihal, Kandagalla, Yatnatti-Badaradinni RCs and Ranga Mandir at Bilgi Cross-IV Yatnatti Badaradinni and ELSR at Yatnatti RC, Badaradinni RC and 2 room school blding (Extra) at Bilagi Cross-IV RC and Toilet in School ground at Yalligutti RC of Bilagi Tq of Bagalkot Dist (Package 9)
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging.The granite/trap/ basalt crushed graded coarse aggregates and fine aggregate...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine agg...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound)
content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below, with wall thickness 2.0 mm corners of the door frame to be Jointed with galvanize...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying ...
Supplying Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 80 X 900 with all lead and lift as per directions of the Engineer-in-Charge.
Supplying Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 100 X 900 with all lead and lift as per directions of the Engineer-in-Charge.
Supplying Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 150 X 900 with all lead and lift as per directions of the Engineer-in-Charge.
Supply and fixing of DI Double flanged wafer type ( Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel A...
Supply and fixing of DI Double flanged wafer type ( Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel A...
Supply and fixing of DI Double flanged wafer type ( Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel A...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per W, lifegreate...
Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The co...
Supplying heavy gauge PVC Conduit Pipe 25mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ceme...
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 9" x 3" (...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted ...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. with all lead and lift and as directed by En...
Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. with all lead and lift and as directed by Engineer in charge o...
Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder with all lead and lift and as directed by Engineer in charge of the work
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Stand...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
02.pdf
Technical Information / Worksheet • 0.18 MB
01.pdf
Instructions to Tenderers • 0.55 MB
KW-4, INDENT-25.docx
Tender Document • 6.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .