15th Finace Tied and Untied Grant 2024-2025

Earthwork excavation for foundation in all soil and sub soils of full depth an may be directed refilling the sides of foundation with excavated earth in layers not more than 10 cm thick well complying with standard specification depositing the surplus earth with in the compound in places show by the departmental officers with initial leads and clearing and leveling of site etc., complete complying with standard specification.

Supplying and Filling in foundation and basement with Filling Sand in layers of not more than 15cm thick well rammed,watered consolidated including cost and conveyance of materials and labour charges etc., complete as per Standard Specification and as directed by departmental Engineers(TNBP No.24&25).

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specificationand as directed by department officials.

Special Ceiling plastering with cement mortor 1:3(one cement and three sand) mix 10mm thick including cost of all materials and all labour charges etc., complete complying with standard specifications.

Plastering the surface of walls with cement mortor 1:5(One cement and five sand) 12 mm thick in all floors including cost of all materials and all labour chargesetc etc., complete complying with standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (5 points per coil) SD 25

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 69

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb. SD 84

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Labour charges for the erection of submersible pumpsetin borewell/openwell including fixing and jointingsubmersible cable with proper clamps upto the starterto required depth and also fixing of riser pipes to therequired depth valves erection clamps, pressure gaugesupto the exterior wall of pump room and erection of panelboard consisting of TPICN switches starter, Voltmeter,Ammeter, three pilot (indicating) lamps capacitor singlephasing preventor, water level guard and laying andjointing the cables and twin earthing as per IE rules etc.,complete and testing the pumpset and trail run for 10days.

Supply and fixing in position of G.I Sheet door using 20mm swg. G.I Plain sheet main frame with 40mm x40mm x 6mm M.S. Angle door frame 25mmx25mmx5mm M.S. Angle and using 25mmx5mm M.S. plate diagonal with necessary cutting bending drilling holes welding and one coat of primary etc., complete.

Supply and fixing ofManhole Cover 60 x 60cm (Heavy Duty) with Frame Complying with std. specifications PWD P.NO 55

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Earth work excavation in all types of strata for laying of pipes with the stanard trench width as per Board circular No.28/AE10/P&D /2001/dt 1.10.2001 & JCE (P&D) Lr.No.LM/AE 10/P&D/2001/Dt.22.11.2001

Supply of unplasticised PVC rigid pipes as per BIS 4985-1988 including of all charges etc complete as per standard specification.

Conveying the PVC pipes and specials to trench, lowering into the trenches, laying to proper grade and alignment, jointing with PVC coupler and specials fixing with neat cement paste and testing to the required pressure as per IS including conveyance of water from 1Km lead for filling during testing.

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

Supply and Delivery of PVC , G.i Specials including other incidential and operational charges etc.

125 mm Dia pvc Tee

63 mm Dia G.I Pipe

63 mm Dia G.I Bend

63 mm Dia G.I Tee

50 mm G.M Non Return Value

80 mm G.M Non Return Value

50 mm Bore Clamp