Repair and replacement of certain E/M works of internal wiring and connecting works for North Camp, South Camp, East Camp and West Camp under AGE(I) MFFR

M&L for replacement of Point wiring for one light point/fan point/exhaust fan/bell point with FRLS copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and sheathed of size 2.5 Sq mm single core multistand in and including PVC concealed conduit Medium class 25 mm dia ISI marked with all fittings such as tees, bends, MS sunken box, modular plates as per site requirement for one fan/ light/Exhaust fan or 5/15Amps socket or bell/buzzer point controlled by one switch including provision of 2.5 Sqmm PVC insulated sheathed copper conductor cable, single core multistand as earth wire to common earth & connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge.

All as per item No 1.00 here-in-before but socket point on the 5/6A independent board with other switches complete all as specifed and as directed by Engineer - In - Charge.

All as per item No 1.00 here-in-before but socket point on the same board with other switches complete all as specifed and as directed by Engineer - In - Charge.

All as per item No 1.00 here-in-before but cable of 4 Sq mm for 15 Amp switch socket outlet on independent board including provision of 4 Sqmm PVC insulated unshethed multistranded copper conductor as earth wire complete all as specifed and as directed by Engineer - In - Charge.

M&L for replacement sub main wiring in PVC conduit/casing-capping with 2 single core 6 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 6 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC Cassing and Capping complete all as specifed and as directed by Engineer - In - Charge. (Note: two run of 6 sqmm with one run of 6 sqmm earth wire and conduit/casing-caping will be measured as 1 unit.

All as per item No 5.00 here-in-before but of size 4 sqmm with earth wire of 4 sqmm.

All as per item No 5.00 here-in-before but of size 2.5 sqmm with earth wire of 2.5 sqmm.

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and as directed by Engr-in-charge.

Taking down any size and any capacity Exhaust fan, ceiing fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed by Engr-in-charge.

M&L for Refixing of exhaust fan, taking down vide item ser No-9.00 and connecting up with 3 core of flexible cable of size 1.5 sqmm after make it serviceable by replacing all defective parts like winding coils, ball bearing, motor housing, stator, rotar, shaft etc as per requirement and overhauling of exhaust fan complete all as specified and as directed by Engr-in-charge.