CONSTRUCTION OF INTERNATIONAL CONVENTION CENTER, KOLHAPUR , DIST- KOLHAPUR (Civil and Electrical)

Amount

Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Softrock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth/ murum, ramming, watering including shoring and strutting etc.complete. (Lift from 3 m To 4.5m.) By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift from 3m to 4.5m). By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 m beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift from 4.5m to 6m ). By Mechanical Means

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.Lower Ground Floor

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.(Lower Ground Floor )

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.(Ground Floor )

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete(.Lower Ground Floor)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete (Ground Floor)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete

Smart Care Preapply HDPE 80 for Raft and Uncofined Retaining Walls 1- Supplying and Installing of Asian Paints Smarteare 1.20 mm thick pro applied HDPE fully bonded membrane or equivalent make having puncture resistance of HOON as per ASIMI 154), tensile strength of 21 Mpa, and hydrostatic head resistance not less than zom water head as per ASTM D 545 elongation of 500% as per ASTM D412, peel adhesion to concrete of 1200 N/m as per ASTM D 901, Lap peel adhesion 450N/m as per ASTM D1876. The size of the membrane should be 1.2m x 20m. The pre-applied, fully bonded HDPE sheet membrane shall be loosely laid on PCC and gets bonded to the underneath of the poured concrete of base/ raft slab and confined retaining wall. The fully bonded HDPE sheet membrane shall consist of a high performance PE film, self adhesive polymer layer and unique particulate layer with pressure sensitive adhesive, which bonds fully to the poured concrete of base slab/confined retaining wall. The membrane shall have minimum of 75 mm side laps and end laps which shall be sealed with double sided adhesive tape, plc complete as per manufactures specification and Instructions. This shall include cleaning & removal of all the dust, dirt, oll, grease, coment laltance, loose particle & prepare the P.C.C. Substrate for laying of waterproofing system, as directed by Engineer Incharge and covering 10 years Guarantee against leakages on Court fee stamp paper of Rs. 500/- etc. complete.(Lower Ground Floor)

Smart Care Preapply HDPE 80 for Raft and Uncofined Retaining Walls 1- Supplying and Installing of Asian Paints Smarteare 1.20 mm thick pro applied HDPE fully bonded membrane or equivalent make having puncture resistance of HOON as per ASIMI 154), tensile strength of 21 Mpa, and hydrostatic head resistance not less than zom water head as per ASTM D 545 elongation of 500% as per ASTM D412, peel adhesion to concrete of 1200 N/m as per ASTM D 901, Lap peel adhesion 450N/m as per ASTM D1876. The size of the membrane should be 1.2m x 20m. The pre-applied, fully bonded HDPE sheet membrane shall be loosely laid on PCC and gets bonded to the underneath of the poured concrete of base/ raft slab and confined retaining wall. The fully bonded HDPE sheet membrane shall consist of a high performance PE film, self adhesive polymer layer and unique particulate layer with pressure sensitive adhesive, which bonds fully to the poured concrete of base slab/confined retaining wall. The membrane shall have minimum of 75 mm side laps and end laps which shall be sealed with double sided adhesive tape, plc complete as per manufactures specification and Instructions. This shall include cleaning & removal of all the dust, dirt, oll, grease, coment laltance, loose particle & prepare the P.C.C. Substrate for laying of waterproofing system, as directed by Engineer Incharge and covering 10 years Guarantee against leakages on Court fee stamp paper of Rs. 500/- etc. complete.(Ground Floor )

Smart Care Ultron (Hybrid Polyurea) for Retaining Walls -Providing and laying liquid based Asian Paints Smartcare Ultron or equivalent make (Polyurea-Polyurethane seamless/jointless treatment) for waterproofing on the Un-confined vertical surface by cleaning the external surface, removal of loose concrete and filling cracks with polymer modified mortar & treatment of tie rod holes, bracing angle etc with plugging mortar, as per manufacturers' recommendation, thereafter, providing & applying one coat of two component solvent free epoxy primer @ 0.15-0.20 kg/m2, followed by providing & applying 2 component high performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. HDPE Termination at Raft with Aluminium strip of width min. 75mm, with the turnkey execution to be done by the manufacturer through its in house subsidiary execution company and as directed by Engineer incharge with covering 10 years Guarantee against leakages on Court fee stamp paper of Rs. 500/- etc. complete.(Lower Ground Floor)

Smart Care Ultron (Hybrid Polyurea) for Retaining Walls -Providing and laying liquid based Asian Paints Smartcare Ultron or equivalent make (Polyurea-Polyurethane seamless/jointless treatment) for waterproofing on the Un-confined vertical surface by cleaning the external surface, removal of loose concrete and filling cracks with polymer modified mortar & treatment of tie rod holes, bracing angle etc with plugging mortar, as per manufacturers' recommendation, thereafter, providing & applying one coat of two component solvent free epoxy primer @ 0.15-0.20 kg/m2, followed by providing & applying 2 component high performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. HDPE Termination at Raft with Aluminium strip of width min. 75mm, with the turnkey execution to be done by the manufacturer through its in house subsidiary execution company and as directed by Engineer incharge with covering 10 years Guarantee against leakages on Court fee stamp paper of Rs. 500/- etc. complete.(Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade (Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade(Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade (Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor )

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Second Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Lower Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Ground Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (First Floor)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Second Floor)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(Lower Ground Floor )

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(Ground Floor)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(First Floor)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(First Floor)

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) (Lower Ground Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)(Ground Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)(First Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)(Second Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming toIS:6441 (Part I) - 1972)(Lower Ground Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming toIS:6441 (Part I) - 1972)(Ground Floor)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming toIS:6441 (Part I) - 1972)(First Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.(Lower Ground Floor)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.(Ground Floor)

Providing and applying texture plaster of STONETEX - TRAVERTINE SERIES - ST-2002 special luxurious stone finish coating (3 product type – 6 coat system) for exteriors and interiors. Texture midcoat incorporating natural stone granules like natural Sandstone, Granite, Limestone, Ceramic chips, natural sand etc. including grooves to be provide as per design and drawings. Apply two coats of under coat primer by roller or brush then apply masking tape to create grooves as per design and drawings. First coat of texture midcoat finish by spray gun, evenly over the entire surface. Apply second coat of texture midcoat finish by spray sprinkle method, evenly on the whole sea of the previously dried first coat. Apply two coats of top protective coat evenly on the surface including grooves with roller or brush. It should be water based and ecofriendly product including preparing the surface, scaffolding etc. complete as directed by Engineer in-charge (Lower Ground Floor)

Providing and applying texture plaster of STONETEX - TRAVERTINE SERIES - ST-2002 special luxurious stone finish coating (3 product type – 6 coat system) for exteriors and interiors. Texture midcoat incorporating natural stone granules like natural Sandstone, Granite, Limestone, Ceramic chips, natural sand etc. including grooves to be provide as per design and drawings. Apply two coats of under coat primer by roller or brush then apply masking tape to create grooves as per design and drawings. First coat of texture midcoat finish by spray gun, evenly over the entire surface. Apply second coat of texture midcoat finish by spray sprinkle method, evenly on the whole sea of the previously dried first coat. Apply two coats of top protective coat evenly on the surface including grooves with roller or brush. It should be water based and ecofriendly product including preparing the surface, scaffolding etc. complete as directed by Engineer in-charge(Ground Floor)

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.(Lower Ground Floor)

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete(Ground Floor)

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete(First Floor)

Providing and applying gypsum plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete(Second Floor)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.(Lower Ground Floor)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.(Ground Floor)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.(First Floor)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.(Second Floor)

Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part-4) 1988 and IS 383- 1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete (Ground Floor )

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC?s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.(Lower Ground Floor)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC?s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologis(Ground Floor)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)(Lower Ground Floor)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)(Ground Floor)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)(First Floor)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)(Second Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.(Ground Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.(First Floor)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.(Second Floor)

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.(Lower Ground Floor)

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete(Ground Floor)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete.(Lower Ground Floor)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete(Ground Floor)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete(First Floor)

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete(Second Floor)

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.(Lower Ground Floor)

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.(Ground Floor)

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.(First Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.(Lower Ground Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete(Ground Floor)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete(Second Floor)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Lower Ground Floor)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(Ground Floor)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.(First Floor)

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning etc. complete.(Lower Ground Floor)

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning etc. complete(Ground Floor)

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints,curing and cleaning etc. complete(First Floor)

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.(Lower Ground Floor)

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete(Ground Floor)

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete(First Floor)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.(Lower Ground Floor)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.(Ground Floor)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.(First Floor)

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.(Second Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.(Lower Ground Floor )

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.(Ground Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.(First Floor)

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.(Second Floor)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.(Lower Ground Floor)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete(Ground Floor)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete(First Floor)

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete(Second Floor)

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.(Lower Ground Floor)

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete(Ground Floor)

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete(First Floor)

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete (1:4:8) of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete(Ground Floor)

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.(Ground Floor)

Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete.

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter(Lower Ground Floor)

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter(Ground Floor)

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter(First Floor)

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter(Lower Ground Floor )

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter(Ground Floor)

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutterV(First Floor)

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter(Second Floor)

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing.(Lower Ground Floor)

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing.(Ground Floor)

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing.(First Floor)

Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer'sspecification and drawing.(Second Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)(Ground Floor)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)(First Floor)

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish(Lower Ground Floor)

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish(Ground Floor)

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish(First Floor)

Providing and Fixing 50mm thk.sliding folding door 25X50 aluminum door profile for shutters wrapped with 12mm thk.ply finished with 4mm thick veneer on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary necessary matt finish stainless steel fixtures fastenings, finishing with french-polish/ waxing and door lock and other hardware with Hafele make complete. (without door frame) etc complete as per directed by Engineer In charge.(including all leads and lifts)(Ground floor)

a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.(Lower Ground Floor)

a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.(Ground Floor)

a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.(First Floor)

b)Shutter : Supplying & Fixing of 55mm thick asbestos free 'TUFWUD' brand - 3 criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping.(Lower Ground Floor)

b)Shutter : Supplying & Fixing of 55mm thick asbestos free 'TUFWUD' brand - 3 criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping(Ground floor)

b)Shutter : Supplying & Fixing of 55mm thick asbestos free 'TUFWUD' brand - 3 criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per IS:3614 (part - II) comprising of 2x8mm Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per IS:401 and kiln seasoned to moisture below 15% as per IS:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cum) frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3mm Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 MPa, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10mmx4mm affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping(First floor)

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete(Lower Ground Floor)

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete(Ground Floor)

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete(First Floor)

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete(Second Floor)

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.(Lower Ground Floor)

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.(Ground Floor)

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.(First Floor)

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.(Second Floor)

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.(Ground Floor)

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete(First Floor)

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY, 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. complete.as directed by engineer-in-charge. (Lower Ground Floor)

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY, 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. complete.as directed by engineer-in-charge. (Ground Floor)

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY, 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. complete.as directed by engineer-in-charge. (First Floor)

Two Track Two Glass Shutter Window : Providing and fixing aluminium color anodized system sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY, 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 2 Track - 2 Glass shutter window/ ventilator, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. complete.as directed by engineer-in-charge. (Second Floor)

Three Track Three Glass Shutter Window :Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 3Track - 3 Glass shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. complete.as directed by engineer-in-charge. (Lower Ground Floor)

Three Track Three Glass Shutter Window :Providing and fixing aluminium system color anodized sliding window of various sizes. Window will be made from YKK / BANDSON / MALWIN / UTILITY 25 to 27 mm slim series or equivalent System. Windows will be of specially extruded aluminium 3Track - 3 Glass shutter, track joints will be of 45 degree joints, joints will be fixed with specially developed clits. Track frame will be fixed to the masonry opening of windows with S S 202 screws. Glass shutter will be made from specially extruded aluminium section, glass considered is 5 mm clear toughened glass. All shutter will be having 45 degree joints, joints will be fixed with specially developed clits to form uniform hairline joint. All shutter will be fixed to the main frame with necessary double roller to have smooth and easy movement of the shutter. Shutters will have single point self pressing lock. All fixing screws will be of S S 202. Windows will be sealed with weather sealant from outer periphery, etc. completeas directed by engineer-in-charge. (Ground Floor)

Alluminium System colour anodized Fixed window - Providing and fixng alluminium system colour anodized fixed window of various sizes.Casement will be made from YKKAP / FENESTA / MALWIN / UTILITY,40mm series or equivalent system window will be of specially extruded alluminium section,joints will be of 45 degree joints,joints will be fixed with specially developed clits.Track frame will be fixed to the masnory opening of windows with S S 202 wood screws.Fixed glass casement will be made from specially extruded alluminium section,glass considered is 5mm clear toughned glass. All shutter will be having 45 degree joints,joints will be fixed fixed with specially developed clits to form uniform hairline joints.All fixing screws will be of SS 202 windows will be sealed with weather sealant from outer periphery etc complete.as directed by engineer-in-charge. (Second Floor)

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.(Lower Ground Floor)

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.(Ground Floor)

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.(First Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.(Ground Floor)

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.(First Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete (Lower Ground Floor)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete (Ground Floor)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.(Lower Ground Floor)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete(Ground Floor)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete(Second Floor)

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.(Lower Ground Floor)

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete(Ground Floor)

Providing and laying Vitrified tiles (Matt and Antiskid Finish) in floor in 600 milimeter x 1200milimeter sizes (thickness to be specified by th e manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 milimeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments excetra. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge.(Ground Floor)

Providing and laying Vitrified tiles (Matt and Antiskid Finish) in floor in 600 milimeter x 1200milimeter sizes (thickness to be specified by th e manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 milimeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments excetra. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge(First Floor)

Providing and laying Vitrified tiles (Matt and Antiskid Finish) in floor in 1200 milimeter x 2400milimeter sizes (thickness to be specified by th e manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid on 20 milimeter thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments excetra. The tiles must be cut with the zero chipping diametermond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.as directed by engineer-in-charge.(Lower Ground Floor )

TERRAZZO FLOORING IN LOBBY AREA Supply and application of 10mm (12mm laid & finished to 10mm) thick Epoxy Terrazzo flooring system like Cerrazzo of Dr. Cipy of Pidilite Industries Limited or equivalent, having Compressive strength: ? 65MPa as per ASTM C579, Flexural strength: ? 25MPa as per ASTM D790, Tensile strength: ? 14 MPa as per ASTM D638. The product must have elongation: ? 5%, when tested as per ASTM D638. Hardness of the floor has to be ? 75, when tested as per Shore D hardness test. Co-efficient of linear thermal expansion of the product will be approximately 13.3x10-6. This product should have the flammability of not more than 0.025inch/minute when tested as per ASTM D 635. Entire system should have the Green Pro Certification from IGBC. Epoxy terrazzo layer to be applied over Epoxy high build primer like Cipoxy 16 and need to be properly finished, grinded and polished with suitable transparent abrasion resistant material like Duraseal. In case of undulated surface, CIPOCRETE HS of Dr. Cipy or equivalent can be used as a floor levelling compound. Termination strip to be used of aluminium L-shape (10mm by 10mm) and to be fixed to the concrete surface as per design or termination using SS screws. All the system of Cerrazzo need to be executed by authorised applicator of the manufacturer and as per the approved method statement of the manufacturer.as directed by engineer-in-charge (Lower Ground Floor)

TERRAZZO FLOORING IN LOBBY AREA Supply and application of 10mm (12mm laid & finished to 10mm) thick Epoxy Terrazzo flooring system like Cerrazzo of Dr. Cipy of Pidilite Industries Limited or equivalent, having Compressive strength: ? 65MPa as per ASTM C579, Flexural strength: ? 25MPa as per ASTM D790, Tensile strength: ? 14 MPa as per ASTM D638. The product must have elongation: ? 5%, when tested as per ASTM D638. Hardness of the floor has to be ? 75, when tested as per Shore D hardness test. Co-efficient of linear thermal expansion of the product will be approximately 13.3x10-6. This product should have the flammability of not more than 0.025inch/minute when tested as per ASTM D 635. Entire system should have the Green Pro Certification from IGBC. Epoxy terrazzo layer to be applied over Epoxy high build primer like Cipoxy 16 and need to be properly finished, grinded and polished with suitable transparent abrasion resistant material like Duraseal. In case of undulated surface, CIPOCRETE HS of Dr. Cipy or equivalent can be used as a floor levelling compound. Termination strip to be used of aluminium L-shape (10mm by 10mm) and to be fixed to the concrete surface as per design or termination using SS screws. All the system of Cerrazzo need to be executed by authorised applicator of the manufacturer and as per the approved method statement of the manufacturer.as directed by engineer-in-charge(Ground Floor)

TERRAZZO FLOORING IN LOBBY AREA Supply and application of 10mm (12mm laid & finished to 10mm) thick Epoxy Terrazzo flooring system like Cerrazzo of Dr. Cipy of Pidilite Industries Limited or equivalent, having Compressive strength: ? 65MPa as per ASTM C579, Flexural strength: ? 25MPa as per ASTM D790, Tensile strength: ? 14 MPa as per ASTM D638. The product must have elongation: ? 5%, when tested as per ASTM D638. Hardness of the floor has to be ? 75, when tested as per Shore D hardness test. Co-efficient of linear thermal expansion of the product will be approximately 13.3x10-6. This product should have the flammability of not more than 0.025inch/minute when tested as per ASTM D 635. Entire system should have the Green Pro Certification from IGBC. Epoxy terrazzo layer to be applied over Epoxy high build primer like Cipoxy 16 and need to be properly finished, grinded and polished with suitable transparent abrasion resistant material like Duraseal. In case of undulated surface, CIPOCRETE HS of Dr. Cipy or equivalent can be used as a floor levelling compound. Termination strip to be used of aluminium L-shape (10mm by 10mm) and to be fixed to the concrete surface as per design or termination using SS screws. All the system of Cerrazzo need to be executed by authorised applicator of the manufacturer and as per the approved method statement of the manufacturer.as directed by engineer-in-charge.(First Floor)

TERRAZZO FLOORING IN LOBBY AREA Supply and application of 10mm (12mm laid & finished to 10mm) thick Epoxy Terrazzo flooring system like Cerrazzo of Dr. Cipy of Pidilite Industries Limited or equivalent, having Compressive strength: ? 65MPa as per ASTM C579, Flexural strength: ? 25MPa as per ASTM D790, Tensile strength: ? 14 MPa as per ASTM D638. The product must have elongation: ? 5%, when tested as per ASTM D638. Hardness of the floor has to be ? 75, when tested as per Shore D hardness test. Co-efficient of linear thermal expansion of the product will be approximately 13.3x10-6. This product should have the flammability of not more than 0.025inch/minute when tested as per ASTM D 635. Entire system should have the Green Pro Certification from IGBC. Epoxy terrazzo layer to be applied over Epoxy high build primer like Cipoxy 16 and need to be properly finished, grinded and polished with suitable transparent abrasion resistant material like Duraseal. In case of undulated surface, CIPOCRETE HS of Dr. Cipy or equivalent can be used as a floor levelling compound. Termination strip to be used of aluminium L-shape (10mm by 10mm) and to be fixed to the concrete surface as per design or termination using SS screws. All the system of Cerrazzo need to be executed by authorised applicator of the manufacturer and as per the approved method statement of the manufacturer.as directed by engineer-in-charge.(Second Floor)

Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing etc complete (Ground Floor)

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.(Ground Floor)

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.(First Floor)

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.(Second Floor)

Bamboowood 14 mm thick tile flooring including quater round, door reduces and plywood- Providing & fixing in position Phenol bonded Epitome Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (MBTPC). The flooring shall be fixed with tongue and groove interlocaking system, with plywood of mr grade of 18mm thickness as base and underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer of size 1900mm x 44mm, wherever required. The Epitome Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.(Ground Floor)

Bamboowood 14 mm thick tile flooring including quater round, door reduces and plywood- Providing & fixing in position Phenol bonded Epitome Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (MBTPC). The flooring shall be fixed with tongue and groove interlocaking system, with plywood of mr grade of 18mm thickness as base and underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and dorr reducer of size 1900mm x 44mm, wherever required. The Epitome Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.(First Floor)

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete(Ground Floor)

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete(First Floor)

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete(Second Floor)

Carpet-Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete(Ground Floor)

Carpet-Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete(First Floor)

Carpet-Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete(Second Floor)

Providing and fixing double shutter glass door of required size of 12 mm thick toughen glass frosting and edge polish as shown in the drawings or as directed , including all necessary fittings like hydraulic patch fitting, top patch fittings, Top pivot, door handle, door lock, door stopper, door soft central 180 weather seal for door edges etc. all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories complete(Ground Floor)

Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.(Lower Ground Floor)

KUBIK Full Height Single Glazed Glass Partition ( KUBIK 100 SG ) Supply & Installation of Modular Aluminium Single glazed partitioning frame of Kubik make 100mm System Using KBOZ 004 ( 100mm x 25mm) as top channel & wall starter Using KBOZ 005 ( 100mm x25mm) as Bottom channel. Using Glass to glass butt joint with I , L & T Joint Partition Dimension – 100mm x 25mm. Finish – BLACK FINISH 10mm thick. clear Toughened Glass.as directed by Engineer-in-charge(Ground Floor)

KUBIK Full Height Single Glazed Glass Partition ( KUBIK 100 SG ) - CURVED PARTITION Supply & Installation of Modular Aluminium Single glazed partitioning frame of Kubik make 100mm System SQ.MTR PER/SQ.MTR Using KBOZ 004 ( 100mm x 25mm) as top channel & wall starter Using KBOZ 005 ( 100mm x25mm) as Bottom channel.T Using Glass to glass butt joint with I , L & T Joint Partition Dimension – 100mm x 25mm. Finish – BLACK FINISH 10mm thick. clear Toughened Glass Partition Height : H-2400mm NOTE :- SAFETY FILM NOT CONSIDERED IN KUBIK SCOPE OF WORK Delivery Time Line : - 8 to 9 Weeks After Cofirm the site measurment.as directed by Engineer-in-charge (Ground Floor)

KUBIK Double leaf STILE 75 Door Frame ( KUBIK 100 SG ) Door Opening Size :- 2400mm x 2400mm Supply & Installation of Modular Aluminium Stile door frame of Kubik make 100mm System, Using KBOZ DF 202 ( 100mm x 25mm) for doorframe Using KBOZ DF 303 & KBOZ DF 304 (75mm x 45mm) for stile door shutter frame Doorframe Dimension – 100mm x 25mm. Stile door shutter frame dimension - 75mm x 45mm Finish – BLACK FINISH 10mm thick. clear toughened Glass Hardware :- KUBIK Flush Hinge OZONE Open Door closer with hold open KUBIK Dead Lock Body 35mm KUBIK Cylinder Key To Knob 70 mm KUBIK H handle - 450mm x 25mm KUBIK Drop down seal KUBIK Tower Bolt KUBIK Door Stoper NOTE :- All Hardware are in Black finish.as directed by Engineer-in-charge(Ground Floor)

Providing and fixing 12 mm thick toughen glass and edge polish as shown in the drawings or as directed, including all necessary fittings like Upper glazing profile, bottom locking glazing profile, standard gasket for profile, locking Gasket 12mm, door soft central 180 weather seal for glass edges as per drawings having glass fixing sections at all sides concealed in partitions etc. complete as directed by Engineer -IN-Charge. gaps between glass panels should be filled by clear silicon weather proofing sealant , EPDM gaskets, handles all necessary fasteners and accessories completeas directed by Engineer-in-charge(Ground Floor)

Providing and fixing 12 mm thick toughen glass and edge polish as shown in the drawings or as directed, including all necessary fittings like Upper glazing profile, bottom locking glazing profile, standard gasket for profile, locking Gasket 12mm, door soft central 180 weather seal for glass edges as per drawings having glass fixing sections at all sides concealed in partitions etc. complete as directed by Engineer -IN-Charge. gaps between glass panels should be filled by clear silicon weather proofing sealant , EPDM gaskets, handles all necessary fasteners and accessories complete.as directed by Engineer-in-charge(First Floor)

Providing & fixing Luxalon SL4 84R plain panel sun louvers Of approved color consisting of panel 84mm wide 16mm deep x 0.6mm thick with round edges panel length up to 6 Mt coil coated on continues paint Line double baked & roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength & good roll forming characteristics Panel shall be clipped to baked enameled aluminium SL-4 panel stringer of 33 mm wide & 86mm deep X 0.95 mm thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86mm center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line etc.complete as directed by Engineer-in-charge.(Lower Ground Floor)

Providing & fixing Luxalon SL4 84R plain panel sun louvers Of approved color consisting of panel 84mm wide 16mm deep x 0.6mm thick with round edges panel length up to 6 Mt coil coated on continues paint Line double baked & roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength & good roll forming characteristics Panel shall be clipped to baked enameled aluminium SL-4 panel stringer of 33 mm wide & 86mm deep X 0.95 mm thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86mm center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line etc.complete as directed by Engineer-in-charge.(Ground Floor)

Providing & fixing Luxalon SL4 84R plain panel sun louvers Of approved color consisting of panel 84mm wide 16mm deep x 0.6mm thick with round edges panel length up to 6 Mt coil coated on continues paint Line double baked & roll formed from enameled corrosion resistance. Aluminium Alloy AA3005 (Al. Mg.) for higher strength & good roll forming characteristics Panel shall be clipped to baked enameled aluminium SL-4 panel stringer of 33 mm wide & 86mm deep X 0.95 mm thick in a standard Length of 5 Mt made of double baked enameled Aluminium alloy AA5050 (Al. Mg.) black with cut-outs to hold the panel in a module of 86mm center to center at a distance of 1 Mt. The Carrier shall be fixed to suitable structure by means of rigid fixing details including Paint Finish : Aluminium panels shall be cromotised for maximum bond between metal & paint enameled twice under high temperature one side with full primer & luxacoat finish. The other side (Inner side) with a primer coat & skin coat on a continuous paint line etc.complete as directed by Engineer-in-charge.(First Floor)

S.S. Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60milimeter x 40milimeter and 1.6milimeter thick pipe as handrail at top, 40milimeter x 8milimeter vertical patti placed at 1148 milimeter center to center, 40milimeter x 8milimeter horizontal patti placed at bottom 100 milimeter above the flooring,12milimeter diametermeter pipe placed vertically in between handrail and bottom patti at 150milimeter c/c and 75milimeter c/c alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge excetra. Complete.(Lower Ground Floor)

S.S. Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60milimeter x 40milimeter and 1.6milimeter thick pipe as handrail at top, 40milimeter x 8milimeter vertical patti placed at 1148 milimeter center to center, 40milimeter x 8milimeter horizontal patti placed at bottom 100 milimeter above the flooring,12milimeter diametermeter pipe placed vertically in between handrail and bottom patti at 150milimeter c/c and 75milimeter c/c alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge excetra. Complete.(Ground Floor)

S.S. Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60milimeter x 40milimeter and 1.6milimeter thick pipe as handrail at top, 40milimeter x 8milimeter vertical patti placed at 1148 milimeter center to center, 40milimeter x 8milimeter horizontal patti placed at bottom 100 milimeter above the flooring,12milimeter diametermeter pipe placed vertically in between handrail and bottom patti at 150milimeter c/c and 75milimeter c/c alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge excetra. Complete.(First Floor)

S.S. Railing : Providing and Fixing matt finished stainless steel (Grade 304) railing with 60milimeter x 40milimeter and 1.6milimeter thick pipe as handrail at top, 40milimeter x 8milimeter vertical patti placed at 1148 milimeter center to center, 40milimeter x 8milimeter horizontal patti placed at bottom 100 milimeter above the flooring,12milimeter diametermeter pipe placed vertically in between handrail and bottom patti at 150milimeter c/c and 75milimeter c/c alternately as shown in the drawing. including buffing, fabricating fixtures and fastening including base or cover plate of appropriate size as directed by Engineer in charge excetra. Complete.(Second Floor)

Providing & fixing 1200 high GLASS RAILING with matt fnished stainless steel (Grade 304) 60mm x 40mm and 1.6 mm thick rectangular pipe as handrail at top having slot for fixing of 12mm thick toughened glass panels of 1200mm length,100mm x 90mm matt finished bracket supports spaced at 600mm center to center at bottom of glass including buffing, fabricating and fixture & fastening errecting , necessary welding , grinding ,finishing, including base or cover plate of appropraite size all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories etc. complete (Ground Floor)

Providing & fixing 1200 high GLASS RAILING with matt fnished stainless steel (Grade 304) 60mm x 40mm and 1.6 mm thick rectangular pipe as handrail at top having slot for fixing of 12mm thick toughened glass panels of 1200mm length,100mm x 90mm matt finished bracket supports spaced at 600mm center to center at bottom of glass including buffing, fabricating and fixture & fastening errecting , necessary welding , grinding ,finishing, including base or cover plate of appropraite size all complete as per architectural drawings and the directions of the engineers-in-charge with all necessary fasteners and accessories etc. complete(First Floor)

AUDITORIUM CHAIR BACKREST - Upholstered with fabric. - Cold injection molded polyurethane foam molded on a metal frame structure. - Contoured cushion for maximum comfort. - The backrest is slotted into a bracket that is connected to the beam. The bracket also allows a multi-angle adjustment up to 30 degrees for optimum sight line and straight alignment. - Modular system that can allow the backrest to be easily interchangeable and/or removed without any tools required. SEAT - Upholstered with fabric. - The seat pan cover is easily removable for easy cleaning and maintenance. - Cold injection molded polyurethane foam molded on a metal frame structure. - Silent counterweight tip-up seat that requires minimal maintenance in the long term. - Modular system that can allow the seat pan to be easily interchangeable and/or removed without any tools required. ARMRESTS - Fully upholstered armrest made out of a solid wood structure with a veneer/laminate top. - Optional: fully upholstered armrest (without wooden top). STRUCTURE SUPPORT - Center pedestal, size 75mm x 100mm, and is welded on a mild steel plate of 200mm x 200mm x 6mm thickness. - There are four holes on the plate for the anchor bolts/self tapping screws that will be mounted on the floor for support. - Steel structures are powder coated in black epoxy. - Optional: galvanised steel structure - Minimum metal exposure at the external part of the seat for a sleek and contemporary design. - The modular system helps increase the effectiveness of the installation and/or dismantling process for any maintenance purposes. POLYURETHANE FOAM - Seat density: 60kg/m3 - Backrest density: 46kg/m3 FIRE RESISTANCE - CAL 117, Ignition Source 0, 1 - BS 5852, Source 0, 1, 5 - BS 7176 STRENGTH AND DURABILITY - Strength and durability for the overall seat and structure comply to EN 12727:2016 (Level 4). DOUBLE HEIGHT ENTRANCE GLAZING AREA, Wall Type - WT-02 DGU GLASS - 8MM THICK ST 167 GLASS Heat Strength + 18MM AIR GAP + 8MM THICK ST 167 GLASS Heat Strength Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of System 6M Height to withstand design wind pressure of 1.3 kpa. The suspended Slick System (300mmX71mm)made out of customized aluminium member spanning vertically. The aluminium system is suspended at top and bottom MS HDG Bracket to accommodate wind pressure and dead load of system including glass. The glass is supported on vertical sides on Mullion, using SS 316 screw, Horizontal sides of glass are unsupported and 15mm gap between glass is sealaed with Non staining silicone of approved make. The system shall have provision to transfer dead load of glass through dead load bracket provided at every bottom of glass and connected to vertical aluminium member all complete in line with Tender Drawing. All the visible surfaces shall have Powder Coated (AAMA 2603) with a minimum thickness of 60 to 80 microns.The non visible aluminum surfaces shall have minimum chromatizing treatment. Rate shall be included extruded aluminium channel & tube fixed with the help of by anchor & SS Screw all in line with the Tender Drawing. System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make inside & out side. Rate shall include necessary clamps / brackets, fastening straps, Screws, nut bolt, washers and other fastening materials shall be in stainless steel grade 316. Gap between RCC & System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make. Providing and Fixing Ethylene Propylene Dinine Monomer (EPDM) Microwave cured Gaskets as weather strip and barrier to ensure water and air tightness. Weather strip shall be EPDM Gaskets with Hardness shore A with a typical value not less than 65, ultimate tensile strength of 70 (+/- 10%) Kg/Sq.cm and ultimate elongation of 250% (+/- 10%). Fabricating and supplying Mild Steel (Hot Dip Galvanized ) Brackets to accommodate 3 Dimensional movement for achieving perfect verticality and proper fixing of structural glazing system with the RCC / masonry / structural steel framework of building structure, using stainless steel Grade 316 anchor fastener, bolts, Teflon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel Grade 316, of the required capacity and in required numbers. The rate shall include all design, engineering, shop drawing Scaffoldingas directed by Engineer-in-charge.(Lower Ground Floor)

DOUBLE HEIGHT ENTRANCE GLAZING AREA, Wall Type - WT-02 DGU GLASS - 8MM THICK ST 167 GLASS Heat Strength + 18MM AIR GAP + 8MM THICK ST 167 GLASS Heat Strength Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of System 6M Height to withstand design wind pressure of 1.3 kpa. The suspended Slick System (300mmX71mm)made out of customized aluminium member spanning vertically. The aluminium system is suspended at top and bottom MS HDG Bracket to accommodate wind pressure and dead load of system including glass. The glass is supported on vertical sides on Mullion, using SS 316 screw, Horizontal sides of glass are unsupported and 15mm gap between glass is sealaed with Non staining silicone of approved make. The system shall have provision to transfer dead load of glass through dead load bracket provided at every bottom of glass and connected to vertical aluminium member all complete in line with Tender Drawing. All the visible surfaces shall have Powder Coated (AAMA 2603) with a minimum thickness of 60 to 80 microns.The non visible aluminum surfaces shall have minimum chromatizing treatment. Rate shall be included extruded aluminium channel & tube fixed with the help of by anchor & SS Screw all in line with the Tender Drawing. System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make inside & out side. Rate shall include necessary clamps / brackets, fastening straps, Screws, nut bolt, washers and other fastening materials shall be in stainless steel grade 316. Gap between RCC & System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make. Providing and Fixing Ethylene Propylene Dinine Monomer (EPDM) Microwave cured Gaskets as weather strip and barrier to ensure water and air tightness. Weather strip shall be EPDM Gaskets with Hardness shore A with a typical value not less than 65, ultimate tensile strength of 70 (+/- 10%) Kg/Sq.cm and ultimate elongation of 250% (+/- 10%). Fabricating and supplying Mild Steel (Hot Dip Galvanized ) Brackets to accommodate 3 Dimensional movement for achieving perfect verticality and proper fixing of structural glazing system with the RCC / masonry / structural steel framework of building structure, using stainless steel Grade 316 anchor fastener, bolts, Teflon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel Grade 316, of the required capacity and in required numbers. The rate shall include all design, engineering, shop drawing Scaffoldingas directed by Engineer-in-charge(Lower Ground Floor)

DOUBLE HEIGHT ENTRANCE GLAZING AREA, Wall Type - WT-02 DGU GLASS - 8MM THICK ST 167 GLASS Heat Strength + 18MM AIR GAP + 8MM THICK ST 167 GLASS Heat Strength Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of System 6M Height to withstand design wind pressure of 1.3 kpa. The suspended Slick System (300mmX71mm)made out of customized aluminium member spanning vertically. The aluminium system is suspended at top and bottom MS HDG Bracket to accommodate wind pressure and dead load of system including glass. The glass is supported on vertical sides on Mullion, using SS 316 screw, Horizontal sides of glass are unsupported and 15mm gap between glass is sealaed with Non staining silicone of approved make. The system shall have provision to transfer dead load of glass through dead load bracket provided at every bottom of glass and connected to vertical aluminium member all complete in line with Tender Drawing. All the visible surfaces shall have Powder Coated (AAMA 2603) with a minimum thickness of 60 to 80 microns.The non visible aluminum surfaces shall have minimum chromatizing treatment. Rate shall be included extruded aluminium channel & tube fixed with the help of by anchor & SS Screw all in line with the Tender Drawing. System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make inside & out side. Rate shall include necessary clamps / brackets, fastening straps, Screws, nut bolt, washers and other fastening materials shall be in stainless steel grade 316. Gap between RCC & System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make. Providing and Fixing Ethylene Propylene Dinine Monomer (EPDM) Microwave cured Gaskets as weather strip and barrier to ensure water and air tightness. Weather strip shall be EPDM Gaskets with Hardness shore A with a typical value not less than 65, ultimate tensile strength of 70 (+/- 10%) Kg/Sq.cm and ultimate elongation of 250% (+/- 10%). Fabricating and supplying Mild Steel (Hot Dip Galvanized ) Brackets to accommodate 3 Dimensional movement for achieving perfect verticality and proper fixing of structural glazing system with the RCC / masonry / structural steel framework of building structure, using stainless steel Grade 316 anchor fastener, bolts, Teflon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel Grade 316, of the required capacity and in required numbers. The rate shall include all design, engineering, shop drawing Scaffoldingas directed by Engineer-in-charge(Ground Floor)

DOUBLE HEIGHT ENTRANCE GLAZING AREA, Wall Type - WT-02 DGU GLASS - 8MM THICK ST 167 GLASS Heat Strength + 18MM AIR GAP + 8MM THICK ST 167 GLASS Heat Strength Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of System 6M Height to withstand design wind pressure of 1.3 kpa. The suspended Slick System (300mmX71mm)made out of customized aluminium member spanning vertically. The aluminium system is suspended at top and bottom MS HDG Bracket to accommodate wind pressure and dead load of system including glass. The glass is supported on vertical sides on Mullion, using SS 316 screw, Horizontal sides of glass are unsupported and 15mm gap between glass is sealaed with Non staining silicone of approved make. The system shall have provision to transfer dead load of glass through dead load bracket provided at every bottom of glass and connected to vertical aluminium member all complete in line with Tender Drawing. All the visible surfaces shall have Powder Coated (AAMA 2603) with a minimum thickness of 60 to 80 microns.The non visible aluminum surfaces shall have minimum chromatizing treatment. Rate shall be included extruded aluminium channel & tube fixed with the help of by anchor & SS Screw all in line with the Tender Drawing. System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make inside & out side. Rate shall include necessary clamps / brackets, fastening straps, Screws, nut bolt, washers and other fastening materials shall be in stainless steel grade 316. Gap between RCC & System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make. Providing and Fixing Ethylene Propylene Dinine Monomer (EPDM) Microwave cured Gaskets as weather strip and barrier to ensure water and air tightness. Weather strip shall be EPDM Gaskets with Hardness shore A with a typical value not less than 65, ultimate tensile strength of 70 (+/- 10%) Kg/Sq.cm and ultimate elongation of 250% (+/- 10%). Fabricating and supplying Mild Steel (Hot Dip Galvanized ) Brackets to accommodate 3 Dimensional movement for achieving perfect verticality and proper fixing of structural glazing system with the RCC / masonry / structural steel framework of building structure, using stainless steel Grade 316 anchor fastener, bolts, Teflon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel Grade 316, of the required capacity and in required numbers. The rate shall include all design, engineering, shop drawing Scaffoldingas directed by Engineer-in-charge(First Floor)

DOUBLE HEIGHT ENTRANCE GLAZING AREA, Wall Type - WT-02 DGU GLASS - 8MM THICK ST 167 GLASS Heat Strength + 18MM AIR GAP + 8MM THICK ST 167 GLASS Heat Strength Design, Supply, Fabrication, Installation, Protection, Cleaning & Handover of System 6M Height to withstand design wind pressure of 1.3 kpa. The suspended Slick System (300mmX71mm)made out of customized aluminium member spanning vertically. The aluminium system is suspended at top and bottom MS HDG Bracket to accommodate wind pressure and dead load of system including glass. The glass is supported on vertical sides on Mullion, using SS 316 screw, Horizontal sides of glass are unsupported and 15mm gap between glass is sealaed with Non staining silicone of approved make. The system shall have provision to transfer dead load of glass through dead load bracket provided at every bottom of glass and connected to vertical aluminium member all complete in line with Tender Drawing. All the visible surfaces shall have Powder Coated (AAMA 2603) with a minimum thickness of 60 to 80 microns.The non visible aluminum surfaces shall have minimum chromatizing treatment. Rate shall be included extruded aluminium channel & tube fixed with the help of by anchor & SS Screw all in line with the Tender Drawing. System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make inside & out side. Rate shall include necessary clamps / brackets, fastening straps, Screws, nut bolt, washers and other fastening materials shall be in stainless steel grade 316. Gap between RCC & System filled with Backer rod & Weather Sealant DC (991)/GE(SCS-9000 NB) of approved make. Providing and Fixing Ethylene Propylene Dinine Monomer (EPDM) Microwave cured Gaskets as weather strip and barrier to ensure water and air tightness. Weather strip shall be EPDM Gaskets with Hardness shore A with a typical value not less than 65, ultimate tensile strength of 70 (+/- 10%) Kg/Sq.cm and ultimate elongation of 250% (+/- 10%). Fabricating and supplying Mild Steel (Hot Dip Galvanized ) Brackets to accommodate 3 Dimensional movement for achieving perfect verticality and proper fixing of structural glazing system with the RCC / masonry / structural steel framework of building structure, using stainless steel Grade 316 anchor fastener, bolts, Teflon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel Grade 316, of the required capacity and in required numbers. The rate shall include all design, engineering, shop drawing Scaffoldin as directed by Engineer-in-charge(Second Floor)

FALSE CEILING AT ROOF LEVEL FOR LOBBY UE LUXALON® Aluminium Panel Ceiling Multi-B Plain System with 20mm closed groove: Providing and fixing UE Luxalon® 30B/80B/130B/180B un-perforated Aluminium panel ceiling manufactured by M/s Hunter Douglas India Pvt. Ltd. of approved RAL shade (as per architect's choice). Panel width - 30 mm/80mm/130mm/180mm. Panel depth - 15 mm. Thickness - 0.5mm for 30mm,80mm & 130mm panel and 0.6mm for 180mm panel, with square edges. Panel length - 3 to 6 mtrs and can be curved, coil coated on a continuous paint line, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. Panel shall be clipped to a baked enamelled aluminium panel carrier of 62mm wide x 29mm deep made of 0.95mm thickess in standard length of 5 mtrs made of doubled baked enamelled aluminium alloy AA 5050 (Al. Mg) black with cut outs to hold the panels in a module of 200 mm (width of gap 20mm open) and at a distance 1.45 mtrs without insulation and 1.25 mtrs with insulation. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Finished with UE clip on alu. U profile / FE or alu. wall L profile / FE or alu. wall W profile. Recess join profile V shape: Recess Join Profiles are made of enamelled aluminium and shall be inserted in between the panel on top of the panel flanges. Paint finish: Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (inner side) with a primer coating and skin coat on a continuous paint line. Mode of Measurements: Measurements shall be from wall to wall without any deductions for lights, diffusers, columns etc.

FALSE CEILING AT FIRST FLOOR LEVEL FOR LOBBY UE LUXALON® Aluminium Panel Perforated (2 mm) Multi-B Ceiling System with 20mm open groove: Providing and fixing UE Luxalon® 80B/130B/180B perforated Aluminium panel of hole 2mm diameter and 4mm center to center, apertures represents 22% perforated area, 30B unperforated Aluminum panel, ceiling manufactured by M/s Hunter Douglas India Pvt. Ltd. of approved RAL shade (as per architect's choice). Panel width - 30mm/80mm/130mm/180mm. Panel depth - 15 mm. Thickness - 0.5mm for 30mm,80mm & 130mm panel and 0.6mm for 180mm panel, with square edges. Panel length - 3 to 6 mtrs and can be curved, coil coated on a continuous paint line, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. Panel shall be clipped to a baked enamelled aluminium panel carrier of 62mm wide x 29mm deep made of 0.95mm thickess in standard length of 5 mtrs made of doubled baked enamelled aluminium alloy AA 5050 (Al. Mg) black with cut outs to hold the panels in a module of 50 mm (width of gap 20mm open) and at a distance 1.55 mtrs without insulation and 1.35 mtrs with insulation. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Finished with UE clip on alu. U profile / FE or alu. wall L profile / FE or alu. wall W profile. Paint finish: Aluminium panels shall be chromatised for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (inner side) with a primer coating and skin coat on a continuous paint line. Recess join profile: Recess Join Profiles are made of enamelled aluminium and shall be inserted in between the panel on top of the panel flanges. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption. NRC: 0.65. Mode of Measurements: Measurements shall be from wall to wall without any deductions for lights, diffusers, columns etc. as directed by Engineer-in-charge

WALL CLADDING IN LOBBY Providing and fixing of UE Luxalon® screen panel cladding fixed system manufactured by M/s Hunter Douglas. The Screen panels of various sizes say 600 mm X 1800 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA 3105 of 1.0 mm thick. Screen panels shall have plain panels as per architect's choice. Panels shall be coated only on the visible side with Architectural Grade Powder Coating in approved RAL colour. The panels of required length and height shall be fixed to suitable steel sub-structure provided by the client. The panel shall be fixed to substructure by means of screen panel guide clamps of 50mm x 50mm x 75 mm Length x 3 mm thick Aluminium coated in black colour. The Screen Panels shall be formed by bending from all four sides and shall have extended flanges to accommodate the L - Cleats. Client shall provide sub frame secondary steel structure made from MS Steel. The Panels shall be fixed to a suitable sub structure by means of rigid fixing details, taking into account the relevant live loads and a dead load. The Installation shall be carried out as per manufacturer recommendation. directed by Engineer-in-charge

STONELAM LAMINUM WALL PANELING IN PASSAGE Porcelain Slim Slab Stonelam, 3+ mm thickness in size of 1000mm x 3000 mm, Slabs should be Structuraly reinforced with fiberglass mesh attached to the back of Porcelain slab. These slabs should have a weight of 8.2 Kg/sqm, the wind load resistance of the slab should be greater than 2.32 KPA, these slabs if used in exterior should be dry cladded only and for interior it should be fixed with wet cladding. Maximum deviation in size on each side should not exceed +/- 0.5mm and on diagonal end it should not exceed +/- 0.1mm. These slabs should have fire resistance equal to or greater than A2 S1 D0, slabs should be frost resistance -ISO10545-12, they should be scratch resistance - ISO 10545, should be chemical resistant under ISO-10545-13, should be resistant to thermal shock under ISO-10545-9. These slabs should be recyclable. The water resistance of the slabs should not exceed 0.3%. The provider should provide a warranty of 25 years on the color fading and aestheticity of the product. The product should not be made in China or in Morbi. Color to be approved as per scheme of the Architect. directed by Engineer-in-charge

FALSE CEILING IN AUDITIRIUN Supply and installation of UE Double membrane Acoustic Plain Light Ceiling Membrane 1 - Plain Membrane (Light Diffuser) UE Mercure BS04015 Composition: PVC film width 240 cm stretched 256 cm : welding HF UE High Quality Membrane 2 - Plain membrane. (Sound Absorber) UE Chronos UMTN1 Membrane Std Size - width max 2200. No welding joint with acoustic property (NRC up to 0.80) Transmission-15%. Thickness :- 0.18 mm. Weight :- 180 g / m2. UE Chronos Ceiling will appear black in color when not lit up, once ceiling is lit up it appers to be same as LED color. Ecology: 100 % recyclable - phtalates free - cadmium free - arsenic free - mercure free; Covering & print are A+ certified; Warranty 10 years. Certificate-Fabric made as per site dimmension ( any shape ) with star harpoorn high frequency welding.Fabric polyvinyl chloride (PVC) guaranteed without changing color.Non flammable fabric EURO CLASS B-S2 d0 in the European classification of reaction to fire EN 13501-2002 based on the European standard EN 14716 and test methods EN ISO 11925-2 2002 and EN 13823 2002 corresponding to the old standard M1. Acoustic Properties of the UE Ceiling System - Ceiling Composition: Ply-Boxing Frame (from all five sides) (in contractor's scope), UE unperforated sheet, 100mm air, UE unperforated sheet, 58mm air + 22mm Insulation (Tonga) sides tightly closed, overall depth: 180mm Sound absorption coefficient according to ISO 354, DIN EN ISO 11654, ASTM C 423 | Report No: 2019/0057_M110: Parameters after ASTM 423; Parameters after DIN EN ISO 11654; Sound Absorption Class B; Soundabsorptioncoefficient αS; according to DIN EN ISO 354; (Hz) - NRC achievable(αs[-]): 250 = 0,63; 315 = 0,70; 400 = 0,70; 500 = 0,74; 630 = 0,74; 800 = 0,83; 1000 = 0,86; Profile Details: UE Star Aluminium Extruded Profile BS 350/01 or BS 350/51 Series; 100% Recyclable; LEED Certified; Profile colour: Raw Aluminium Finish. LED system is in client / contractor's scope. Above ceilings are designed & installed by Maharashtra's local vendor who has more than a decade experience in stretch ceiling solutions and successfully installed 1,00,000+ sqm ceilings. directed by Engineer-in-charge

WALL PANELING IN AUDITORIUM UPTO 3.30 M Providing and fixing of UE Luxalon® screen panel cladding fixed system manufactured by M/s Hunter Douglas. The Screen panels of various sizes say 600 mm X 1800 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA 3105 of 1.0 mm thick. Screen panels shall have perforated panels as per architect's choice. The combination of perforations (The maximum perforation area shall not exceed 30%) to be provided to suite the design panels. Panels shall be coated only on the visible side with Architectural Grade Powder Coating in approved RAL colour. The panels of required length and height shall be fixed to suitable steel sub-structure provided by the client. The panel shall be fixed to substructure by means of screen panel guide clamps of 50mm x 50mm x 75 mm Length x 3 mm thick Aluminium coated in black colour. The Screen Panels shall be formed by bending from all four sides and shall have extended flanges to accommodate the L - Cleats. Client shall provide sub frame secondary steel structure made from MS Steel. The Panels shall be fixed to a suitable sub structure by means of rigid fixing details, taking into account the relevant live loads and a dead load. The Installation shall be carried out as per manufacturer recommendation. directed by Engineer-in-charge

ACUSTICAL CEILING IN AUDITORIUM NRC 0.85 Providing and Fixing ‘APHONY GLOSS’ 15 mm tiles made of Wood Fibre 1mm width cement composites (Non-Magnesite Bonded) covered with Acoustically Transparent Absorptive microfibres on the front side with an option of colours as per the choice of the Architect/ person in charge of size 595 X 595mm Highly recommend for ceilings, has excellent noise absorption of 0.85 NRC as per ISO 354/ASTM 423C, meets stringent Fire Ratings ASTM D- 876, and BS:476 weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration. Can be installed on T24 grid system of 0.6mm thick ,Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 35 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life with a backing of HIMALYAN ACOUSTICS 50mm 1000 GSM thick absorb-wool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 for excellent results. directed by Engineer-in-charge

ACUSTICAL WALL PANELING IN AUDITORIUM ABOVE 3.30 M Providing and fixing Himalyan Acoustics “Stretch Fabric full System” with ’Melody String 600x1200x15mm tile made with wood fiber. These Panel are made with inorganic binder wood fibre, which in all contribute to its wondering features & provide NRC 1.0 @500 Hz tested as per IS:8225-1987 (Equivalent to ISO: 354-1985 & ASTM 423-90). Panels are an ecological green material. It is non flammable as per IS:3614 (Part-II). It facilitates fast, rapid construction of walls & roofs. It is economic & energy efficient. Boards enhance the value of buildings. It requires very low, maintenance cost. Fabric colour as per Architect/Client choice. Acoustical infill of 300 GSM absorb wool thickness 10mm which is adhered to the acoustical panel on the front side. Then 12mm Vinyl tracks are screw fixed on the 8 mm thick and 50mm wide ply strips. Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC of 1.0 @500 Hz. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results. directed by Engineer-in-charge

Stage Ceiling Area Application: Ceiling NRC 0.85 Providing and Fixing ‘APHONY GLOSS’ 15 mm tiles made of Wood Fibre 1mm width cement composites (Non-Magnesite Bonded) covered with Acoustically Transparent Absorptive microfibres on the front side with an option of colours as per the choice of the Architect/ person in charge of size 595 X 595mm Highly recommend for ceilings, has excellent noise absorption of 0.85 NRC as per ISO 354/ASTM 423C, meets stringent Fire Ratings ASTM D- 876, and BS:476 weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration. Can be installed on T24 grid system of 0.6mm thick ,Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 35 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life with a backing of HIMALYAN ACOUSTICS 50mm 1000 GSM thick absorb-wool tested as per Fire Retardant ASTMD 635-1991 and IS 15061-2002 for excellent results. directed by Engineer-in-charge

ZINC FLAT LOCK PANEL INSULATED ROOFING SYSTEM Providing and fixing of Zinc Titanium Alloy as - Flat Lock Panel of size 425mmX425mm of Nedzinc/V M Zinc/Kingspan or Equivalent barand as per Architect design & approval in 0.7mm thick in comprising of the following layers 1) TOP LAYER - Zinc titanium alloy Flat Lock Panel of size 425mmX425mm as per Architect design) manufactured from zinc titanium alloy in preweathered Quartz Plus finish in 0.7mm minimum thickness .The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2, 0.2% Proof Stress: min 100N/mm2, Modulus of elasticity: 90,000 N/mm2. Panels shall be fixed to the substructure using Stainless Steel Delta clips (SS304) fixing & sliding clips of suitable height with spacing as required for the wind loads. The zinc manufacturer shall have all the required standing seam profiling machines/ tools & design assistance in India & should have supplied zinc roofing / cladding for projects in India. The zinc roof sheets shall have a protection on its underside consisting of 55 microns thick composite acrylate- urethane protective coating. The protective coating eliminates any risks related to possible corrosion due to contact with incompatible materials and where the underside of the roof sheets is not ventilated. It should be done at manufacturer's production facility only. No third party coating should be done. The zinc manufacturer shall have regsitred office in India for more than 10 years & have all the required machines / tools & design assistance available in India & should have supplied zinc titanium alloy for roofing / cladding projects in India as pre qualifcation criteria of successful handover of Zinc projects of similar nature with min PO copies of Indian projects older than 7 years to be submitted for approval by zinc manufacturers. Installer should be Authorized vendor from Zinc manufacturing with min 2 projects completed of 50% of this project area similar Govt catalogy. The Installation to be carried out by specialised agency approved by zinc titanium alloy manufacturer. The agency should have completed zinc titanium roofing / cladding works in India of the same brand for which they are quoting for, in this project. Zinc Titanium Roofing Installer should have prior experience of Zinc roofing installation of similar nature & should be recommended from the manufacturer directly. Approval for the drawings & Zinc surface finish should be given by Engineer In charge / Architect /PMC. Zinc should have compliance with the EN 988 standard. Installation & design assitance should be given by Zinc Titanium Alloy Manufacturer to Zinc Installer for smooth & quality execution work. Zinc Titanium Alloy should be supplied with protective film having manufacturer's branding. Zinc Titanium Alloy manufacturer should be ISO 9001 (quality management) and ISO 14001 (environmental management) certified. ZINC Titanium The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2,0.2% Proof Stress: min 100 N/mm2, Modulus of elasticity: 90,000 N/mm2 Preweathered Zinc Titanium alloy shall be rolled zinc alloyed with copper & titanium complying EN988 standard ,produced from Z1 quality zinc with atleast 99,95 % zi`nc .The zinc roofing sheets shall be as per EN 988 standards .Light Grey Pre- Weathered Titanium Zinc consists of rolled zinc alloyed with copper and titanium that complies with European standard EN 988. This treatment consists of chemically converting the upper crystalline structure of the metal that transforms zinc into zinc phosphate. It gives rolled zinc a bright grey aspect, similar in colour to the patina that forms on natural zinc after several months of exposure to the atmosphere. As an indication, the average characteristics of this conversion coating are as follows: Nature: quadric-hydrated zinc phosphate (hopeite) Weight: 35 mg/dm2 Thickness: approx. 1 micrometer Solubility: insoluble in water Colour: Y luminance = approx. 25 (bright grey) Approved Make - VMZINC 1. Manufacturer must have supplied material for 5 or more projects of similar nature 2. Manufacturer must have 2 alternate roll forming machines in India to immediately address any machine failure like situation during project execution stage 3. Manufacturer must have inhouse design team in India to help with detail shop drawings, specially the interfaces which are very critical for the porject & extend support to Installler . 4. Manufacturer must have a craftsman (Operation team) in India to monitor installation sequencess at critical stages to ensure all the details are being implemented as defined during design stage . 5. Installer should be the Authorized agency approved by Zinc Manufacturer which is required to give composite warranty of the system. Installer should have relevant experience of min 2 projects of 50% area completed for similar Govt projects. Product Warranty - Zinc Titanium Alloy manufacturer to produce / submit 30 years material integrity warranty for the supplied material after succesful completion of the project. 2) SECOND LAYER - Anti abrasive breathable membrane laid at the underside of zinc panels. Anti- Abrasive membrane to be laid underneath the roofing bullnose sheets . High Density polyethylene underlay membrane of 0.6mm with Studs of 8.0mm spaced at 19.5mm. Membrane shall have compression resistance of 250 kN/m². It shall have stud free lateral edge of 100mm for overlap of membrane. It should be chemically and electrically neutral,resistant to mould and chemical aggressions. It should be stabilized for thermal cycles and dimensionally stable between (-30°C & 80°C) 3) THIRD LAYER - GI Strip - 1.0mm thick GI strips to placed at distance of 430 mm for fixing of clips 4) FOURTH LAYER - Low Rib : 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.5mm to 4.0mm deep ribs at pitch of nominal 48mm centre to centre distance 5) FIFTH LAYER:- Z GIRT: Sub girt in Z-section 1.5mm thk in galvanised steel 120 gsm fixed to steel purlins through bottom sheet 6) SIXTH LAYER: INSULATION - Rockwool insulation of 100mm thickness, 64kg/m³ density with one side aluminum foil to act as vapour barrier. 7) SEVENTH LAYER : Bottom sheet – Colour Coated Trapezoidal Galvalume minimum thickness of 0.50mm (TCT) profile sheet of 980-1050 mm effective cover width and 28‐35 mm height ribs with pitch at 200‐250 mm centre‐to‐centre. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi‐strength steel with min. 550 MPa yield strength with 150 gsm/m2. metallic hot dip coated with Aluminium‐Zinc alloy 55% Aluminium, 45% Zinc) as per AS 1397. Self Drilling screws SS304 to be used for fixing of Hi-rib currugated sheet with MS supporting purlin structure.as directed by engineer-in-charge.

ZINC FLASHING IN 0.7MM THICK Supply & fixing of 0.7mm zinc flashing having girth upto 250mm in the same finish as the roof finish for eaves, gables, ridges, fascia etc. as required for site detailing along with 0.7 mm thick Galvanized Steel Stiffeners having girth upto 250mm maximum. RHS MS Box Section / Pulrins to be provided by Main Contractor at a distance 600mm Centre to centre distance maximum for fixing of above built up on the surface. directed by Engineer-in-charge

ALUMINIUM GUTTER Supply & Installation of Aluminium Non-insulated gutter of 2mm thickness Alloy AA1100 / 1200 with complete seamless Argon welding and gutter expansion joints @ every 12m. It includes necessary down take spout with diameter upto 150 - 200 mm at required intervals as per MEP consultant details to be provided & other accessories like Cover plate, end caps, and welding at joints. The Girth of gutter would be upto 1500mm. Dye Penetration test to be conducted wherever aluminium welding has been done. All complete as per direction of Engineer Incharge.

FAÇADE-- ZINC FLAT LOCK PANEL INSULATED FAÇADE CLADDING SYSTEM Providing and fixing of Zinc Titanium Alloy Flat Lock Panel of size 425mmX425mm of Nedzinc/V M Zinc/Kingspan or Equivalent barand as per Architect design & approval in 0.8mm thick in comprising of the following layers 1) TOP LAYER - Zinc titanium alloy Flat Lock Panel of size 425mmX425mm manufactured from zinc titanium alloy in preweathered Quartz finish having 0.8mm minimum thickness .The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2, 0.2% Proof Stress: min 100N/mm2, Modulus of elasticity: 90,000 N/mm2. Panels shall be fixed to the substructure using Stainless Steel Delta clips (SS304) fixing & sliding clips of suitable height with spacing as required for the wind loads. The zinc manufacturer shall have all the required standing seam profiling machines / tools & design assistance in India & should have supplied zinc roofing / cladding for projects in India. The zinc manufacturer shall have regsitred office in India since more than 5 years & have all the required machines / tools & design assistance available in India & should have supplied zinc titanium alloy for roofing / cladding projects in India as pre qualifcation criteria of successful handover of Zinc projects of similar nature. PO copies of Indian projects older than 5 years to be submitted for approval by zinc manufacturers. The Installation to be carried out by specialised agency approved by zinc titanium alloy manufacturer. The agency should have completed zinc titanium cladding works in India of the same brand for which they are quoting for, in this project. Zinc Titanium Roofing Installer should have prior experience of Zinc roofing installation of similar nature & should be recommended from the manufacturer directly. Approval for the drawings & Zinc shade should be given by Engineer In charge / Architect /PMC. Zinc should have compliance with the EN 988 standard. Installation & design Assitance should be given by Zinc Titanium Manufacturer to Zinc Installer for smooth & quality execution work. Zinc Titanium Alloy should be supplied with protective film having manufacturer's branding. ZINC Titanium The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2,0.2% Proof Stress: min 100 N/mm2, Modulus of elasticity: 90,000 N/mm2 Preweathered Zinc Titanium alloy shall be rolled zinc alloyed with copper & titanium complying En988 standard ,produced from Z1 quality zinc with atleast 99,95 % zi`nc .The zinc roofing sheets shall be as per EN 988 standards .Light Grey Pre- Weathered Titanium Zinc consists of rolled zinc alloyed with copper and titanium that complies with European standard EN 988. This treatment consists of chemically converting the upper crystalline structure of the metal that transforms zinc into zinc phosphate. It gives rolled zinc a bright grey aspect, similar in colour to the patina that forms on natural zinc after several months of exposure to the atmosphere. As an indication, the average characteristics of this conversion coating are as follows: Nature: quadric-hydrated zinc phosphate (hopeite) Weight: 35 mg/dm2 Thickness: approx. 1 micrometer Solubility: insoluble in water Colour: Y luminance = approx. 25 (bright grey) Approved Make - VMZINC FIRE PERFORMANCE - We manufacture to international standards: EN 988 - ASTM - BS - AFNOR - DIN Fire resistance: A1 (in accordance with EN 13501) 1. Manufacturer must have supplied material for 5 or more projects of similar nature 2. Manufacturer must have 2 alternate roll forming machines in India to immediately address any machine failure like situation during project execution stage 3. Manufacturer must have inhouse design team in India to help with detail shop drawings, specially the interfaces which are very critical for the porject & extend support to Installler . 4. Manufacturer must have a craftsman (Operation team) in India to monitor installation sequencess at critical stages to ensure all the details are being implemented as defined during design stage . Product Warranty - Zinc Titanium Alloy manufacturer to produce / submit 50 years material integrity warranty for the supplied material after succesful completion of the project. 2) SECOND LAYER - Anti abrasive breathable membrane laid at the underside of zinc panels. Anti- Abrasive membrane to be laid underneath the roofing bullnose sheets . High Density polyethylene underlay membrane of 0.6mm with Studs of 8.0mm spaced at 19.5mm. Membrane shall have compression resistance of 250 kN/m². It shall have stud free lateral edge of 100mm for overlap of membrane. It should be chemically and electrically neutral,resistant to mould and chemical aggressions. It should be stabilized for thermal cycles and dimensionally stable between (-30°C & 80°C). 3) THIRD LAYER -GI Strip - 1.0mm thick Galvanised Steel strips to placed at distance of 330mm to 430mm mm for fixing of clips 4) FOURTH LAYER - Low Rib : 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.5mm to 4.0mm deep ribs at pitch of nominal 48mm centre to centre distance. 5) FIFTH LAYER:- Z GIRT: Sub girt in Z-section 1.5mm thk in galvanised steel 275 gsm fixed to steel purlins through bottom sheet. 6) SIXTH LAYER: INSULATION - Rockwool insulation of 100mm thickness, 64kg/m³ density with One side aluminum foil to act as vapour barrier. 7) SEVENTH LAYER : Bottom sheet – Colour Coated Trapezoidal Galvalume minimum thickness of 0.50mm (TCT) profile sheet of 980‐1050 mm effective cover width and 28‐35 mm height ribs with pitch at 200‐250 mm centre‐to‐centre. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi‐strength steel with min. 550 MPa yield strength with 150 gsm/m2. metallic hot dip coated with Aluminium‐Zinc alloy 55% Aluminium, 45% Zinc) as per AS 1397. Fixed to the purlins with self drilling screws SS 304 at 500mm spacing. as directed by engineer-in-charge.

SOFFIT-- ZINC FLAT LOCK PANEL INSULATED SOFFIT SYSTEM Providing and fixing of Zinc Titanium Alloy Flat Lock Panel of size 425mmX425mm of Nedzinc/V M Zinc/Kingspan or Equivalent barand as per Architect design & approval in 0.8mm thick in comprising of the following layers 1) TOP LAYER - Zinc titanium alloy Flat Lock Panel of size 425mmX425mm manufactured from zinc titanium alloy in preweathered Quartz finish having 0.8mm minimum thickness .The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2, 0.2% Proof Stress: min 100N/mm2, Modulus of elasticity: 90,000 N/mm2. Panels shall be fixed to the substructure using Stainless Steel Delta clips (SS304) fixing & sliding clips of suitable height with spacing as required for the wind loads. The zinc manufacturer shall have all the required standing seam profiling machines / tools & design assistance in India & should have supplied zinc roofing / cladding for projects in India. The zinc manufacturer shall have regsitred office in India since more than 5 years & have all the required machines / tools & design assistance available in India & should have supplied zinc titanium alloy for roofing / cladding projects in India as pre qualifcation criteria of successful handover of Zinc projects of similar nature. PO copies of Indian projects older than 5 years to be submitted for approval by zinc manufacturers. The Installation to be carried out by specialised agency approved by zinc titanium alloy manufacturer. The agency should have completed zinc titanium cladding works in India of the same brand for which they are quoting for, in this project. Zinc Titanium Roofing Installer should have prior experience of Zinc roofing installation of similar nature & should be recommended from the manufacturer directly. Approval for the drawings & Zinc shade should be given by Engineer In charge / Architect /PMC. Zinc should have compliance with the EN 988 standard. Installation & design Assitance should be given by Zinc Titanium Manufacturer to Zinc Installer for smooth & quality execution work. Zinc Titanium Alloy should be supplied with protective film having manufacturer's branding. ZINC Titanium The material properties shall be as follows: Ultimate tensile strength: minimum 150 N/mm2,0.2% Proof Stress: min 100 N/mm2, Modulus of elasticity: 90,000 N/mm2 Preweathered Zinc Titanium alloy shall be rolled zinc alloyed with copper & titanium complying En988 standard ,produced from Z1 quality zinc with atleast 99,95 % zi`nc .The zinc roofing sheets shall be as per EN 988 standards .Light Grey Pre- Weathered Titanium Zinc consists of rolled zinc alloyed with copper and titanium that complies with European standard EN 988. This treatment consists of chemically converting the upper crystalline structure of the metal that transforms zinc into zinc phosphate. It gives rolled zinc a bright grey aspect, similar in colour to the patina that forms on natural zinc after several months of exposure to the atmosphere. As an indication, the average characteristics of this conversion coating are as follows: Nature: quadric-hydrated zinc phosphate (hopeite) Weight: 35 mg/dm2 Thickness: approx. 1 micrometer Solubility: insoluble in water Colour: Y luminance = approx. 25 (bright grey) Approved Make - VMZINC FIRE PERFORMANCE - We manufacture to international standards: EN 988 - ASTM - BS - AFNOR - DIN Fire resistance: A1 (in accordance with EN 13501) 1. Manufacturer must have supplied material for 5 or more projects of similar nature 2. Manufacturer must have 2 alternate roll forming machines in India to immediately address any machine failure like situation during project execution stage 3. Manufacturer must have inhouse design team in India to help with detail shop drawings, specially the interfaces which are very critical for the porject & extend support to Installler . 4. Manufacturer must have a craftsman (Operation team) in India to monitor installation sequencess at critical stages to ensure all the details are being implemented as defined during design stage . Product Warranty - Zinc Titanium Alloy manufacturer to produce / submit 50 years material integrity warranty for the supplied material after succesful completion of the project. 2) SECOND LAYER - Anti abrasive breathable membrane laid at the underside of zinc panels. Anti- Abrasive membrane to be laid underneath the roofing bullnose sheets . High Density polyethylene underlay membrane of 0.6mm with Studs of 8.0mm spaced at 19.5mm. Membrane shall have compression resistance of 250 kN/m². It shall have stud free lateral edge of 100mm for overlap of membrane. It should be chemically and electrically neutral,resistant to mould and chemical aggressions. It should be stabilized for thermal cycles and dimensionally stable between (-30°C & 80°C).3) THIRD LAYER -GI Strip - 1.0mm thick Galvanised Steel strips to placed at distance of 330mm to 430mm mm for fixing of clips 4) FOURTH LAYER - Low Rib : 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.5mm to 4.0mm deep ribs at pitch of nominal 48mm centre to centre distance. 5) FIFTH LAYER:- Z GIRT: Sub girt in Z-section 1.5mm thk in galvanised steel 275 gsm fixed to steel purlins through bottom sheet. 6) SIXTH LAYER: INSULATION - Rockwool insulation of 100mm thickness, 64kg/m³ density with One side aluminum foil to act as vapour barrier. 7) SEVENTH LAYER : Bottom sheet – Colour Coated Trapezoidal Galvalume minimum thickness of 0.50mm (TCT) profile sheet of 980‐1050 mm effective cover width and 28‐35 mm height ribs with pitch at 200‐250 mm centre‐to‐centre. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi‐strength steel with min. 550 MPa yield strength with 150 gsm/m2. metallic hot dip coated with Aluminium‐Zinc alloy 55% Aluminium, 45% Zinc) as per AS 1397. Fixed to the purlins with self drilling screws SS 304 at 500mm spacing.as directed by engineer-in-charge.

FLASHING-- ZINC FLASHING IN 0.8MM THICK Supply & fixing of 0.8mm zinc flashing having girth upto 250 mm in the same finish as the facade finish for eaves, gables, fascia etc. as required for site detailing along with 0.8mm thick Galvanized Steel Stiffeners having girth upto 250mm maximum. RHS MS Box Section / Pulrins to be provided by Main Contractor at a distance 600mm Centre to centre distance maximum for fixing of above built up on the surface.

OPERABLE PARTITION WALL IN AUDITORIUM Providing & Fixing Manually Operated 100mm thick Operable Wall System STC - 50db(+-) MDF Finish Aluminium Anodize finish Partition details as below Size: P-1: 1190mmW x 7600mmH Installation of Partition including MS Structure Note: Installation Includes Labour Charges Transportation, Travelling of labour, Accommodation, Track Fixing, Panel Hanging, Tools & Tackles,Machinery & Equipment. as directed by Architects & Engineer In-Charge.

Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is double sided 50 mm depth profile with media accommodation depth of 6 mm media of ACP acrylic up to 5 mm thickness can be pasted directly on frames or attached on frame with help of dual lock tape. Sign fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Cosign India make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade anodizing (Thickness 15-20 microns) as per international standards, with 10 years warranty under normal working conditions.Sign is double sided 100 mm depth profile with media accomodation depth of 8 mm media of ACP/ acrylic upto 6 mm thickness .Frame with 2 round corners on diagonally , round corners made up of cast aluminium with outer radius of 80 mm .Can be pasted directly on frames or attached on frame with help of dual lock tape.Sign can be edge lite with help of edge lite led modules ,led of LUCOLED make EL31 , fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 Years warranty under normal working conditions.Sign is double sided with 2 aluminium profiles connected with each other with 2 plastic moulded endcaps.Galvanised iron multistrand twisted 2 mm diameter wire (upto1.5 meter in length) with Stainless steel eco-suspension clips screw fitted directly in ceiling (rigid base) engaged with wire stainless steel eco suspension clips with wire adjustment mechanism.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium side tracks and common click clips for panel fitting. a.Sign is including all plastic injection moulded clips black in shade which are slided in side tracks ,media can be flat bed UV printed on panels/ profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions. Sign flip profiles with 32 mm visible border.Sign has high quality plastic moulded base with slightly flexible in nature, with wall mountiing screw position hidden beneath the flip profiles. and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a sign made up of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) silver anodised shade as per International standards, with 10 years warranty under normal working conditions. Frame consisting of media accommodation depth of 15 mm with overall depth of profile of 51 mm approx. Frame consisting of ART springs to hold media firmely on profile slots. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing a signs made as using Cosign india make .Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet)with Premium grade Anodizing (Thickness 15-20 microns) as per International standards, with 10 years warranty under normal working conditions.Sign is single sided with aluminium profile click fitted on 2 plastic moulded endcaps.Sign is including all plastic injection moulded end caps black in shade which are directly press fitted ,media (vinly) warapping by virtue of design of profiles.Cosign make MPI panels fitted and installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing sign of Cosign make Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with premium grade anodizing (Thickness 15-20 microns) as peinternational standards, with 10 years warranty under normal working conditions. Profile to form frame with overall depth of 10 mm with media of thickness upto 3mm. 2 mm thick acrylic/ACP . I-sign Fix profile of Cosign make with M.S zinc coated corners with grub screws. Installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing ready sign & fixing at location a Cosign make emergency exit sign- illuminated, surface mount (wall or ceiling) Dual sided made up of plastic material , battery backup of 3 hours (180 mins) .Battery life of 300 cycles of charge & discharge Li- ion battery 3.7 Volt, 100 mA, Charge time of 24 hours. Input voltage 220-240 Volt A.C, 50/60 Hz. Viewing distance 30 meter, degree of protection IP20 (rating for protection against solid object upto 12 mm) white light colour full back (white colour) LED illumination with green white coloured graphic inserted on both sides on 0.4 mm PC (sizes, texts, symbols or graphics as per standard safety norms & regulations) graphic options of -left ,right, up staircase down staircase. Test facilty button self test plus auto self test, opreration in maintained and non maintained mode (power saver mode).Sign with 12 months warranty for electric circuit & 6 months warranty for battery. Sign provided with dual mounting arrangement of mounting on wall & celing both ( with flat rigid support/base).Sign is including all connection wires (upto 1 mtr) & high tensile strength zinc coated self tapering screws (4 nos with screw wall plastic packing), installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Non Lit 3D Letters made in SS304 grade sheet metal with thickness of 2mm laser cut and fabricated with rising of 100mm with powder coating as per approved colour shade. MS fabrication for free standing letters to be done in 50mm x 50mm x 2.9mm square tubes as per shape of letters and hidden inside the letters. Fabricated structure to be welded on 12mm MS Base plate. Entire fabricated structure to be powder coated in approved colour shade. Size: Letter height 1000mm width as per proportion as per given font. as directed by engineer-in-charge

Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with Lifetime warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed with two no's of 24 mm depth aluminium frames for media signage, mounting with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing and fixing at location a signs M.S internal hollow tube structure using Cosign Make- Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with 10 years warranty under normal working conditions. Sign is including all extruded aluminium profiles profiles including i) 4 base profiles mill finished glossy appearance or texture, base profile with slots to accomodate 50x 50 mm , 100x50 mm or 150x 50 mm,(to create max depth of 200 mm from either of the combination aftet mounting base & cover profiles, M.S structure & 'V' notch groove to guide self tapering screws,directly to be screwed with ,Internal M.S structure with help of stainless steel high tensile strength zinc coated self tapering CSK screws (length as per requirement) ii) 4 cover profiles of eliiptical shape premium anodised with intel- locating faciltiy with base profile for posiotioning. to be screwed with base profile (screws not visible from outside) after cover profile is mounted to base iii) Top & bottom ACP egde profile premium grade anodised to cover edges of ACP free mounting without drilling or screwing. iv) ACP connect profile with minimum display free mounting without lockuing & drilling. etc ,Ultra violet print on ACP or ACRYLIC sheet can be done. Also, arrangement is done to (ACP or Acrylic 3 mm thick can be Inserted in Cosign totem profile slots). Top hat asper profile shape (aluminium 2-3 mm thick) is used to cover top part, 2mm thick opaque white acrylic(or clear)can be pasted on text panels as numbers with help of 3M make adhesive.also LED (Back lite) modules or edge lite modules. CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing and fixing at location a signs made up of Cosign India Pvt Ltd make I sign -display signage with 100 mm depth Aluminium extrusion Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminium homogeneous billet) with Premium grade Anodizing (Thickness 15- 20 microns) Flatness & Twist of profile within 1.5 mm / meter length, with 10 years warranty under normal working conditions. Media accomodation depth of 8 mm avialble for pasting on dual lock or strong two way adhesive. M.S fabrication slot of 65 mm depth for internal M.S structure.Media upto 6 mm thickness can be pasted or mounted with help of dual lock tape .assembled totem can be edge lite with help of edge lite modules or back lite with help of back lite modules.CosignTotem profiles screwed fixed with internal M.S structure are installed at site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Providing and fixing at location a sign using Modular Aluminium extrusions (Alloy 6060 as per European standards EN755-2-2008 tensile strength 190 MPa typical BHN is 70 from virgin aluminiumhomogeneous billet) with Premium grade Anodizing (Thickness 15-20 microns) International standards, with Lifetime warranty under normal working conditions. Silver anodised aluminium 80 x 80 mm outer size (octagonal shaped) cover list anodised profile to hide screw fittings of pole and M.S structure . M.Sstructure of 'C' channel made by joining two 'L' angles 35x35x3 mm Pole to be screw fitted into fabrication, actthed with two no's of 24 mm depth aluminium frames for media signage, mounting with media accomodation depth of 6 mm , frame screw fitted at multiple position along vertical and horizontal side facing the octagonal pole. (size as per drawing) with in built slots to accomodate media (ACP,ACRYLIC,PLY etc) cover list profile used to specify left out below portion for display installed with fixbox alumnium component provided with system for Text panel fixing with pole sign to be installedat site in plumb and level at specified location as per drawing to the satisfaction of the engineer-in-charge.

Structural Glazing : Providing and fixing structural glazing work of 5mmtk tinted toughened glass with frame work made of aluminum RHS of size 64mm x 58mm color anodized as per design and drawing, aluminum sections should be confirming IS 63400 , glass pasted to frame work with 3M VHB tape and DOW CORNING 995 silicon sealant and gaps between glass panels should be filled by clear Dow CORNING 789 silicon weather proofing sealant , with all necessary fasteners and accessories complete.As per directed by engineer Incharge

Openable Shutter in Structural Glazing : Providing and fixing openable shutter in structural glazing work of 5mmtk tented toughened glass with frame work made of aluminum RHS of size 64mm x 58mm color anodized as per design and drawing, aluminum sections should be confirming IS 63400 , glass pasted to frame work with 3M VHB tape and DOW CORNING 995 silicon sealant and gaps between glass panels should be filled by clear Dow CORNING 789 silicon weather proofing sealant , with good quality SS friction hinges, rubber gaskets handles all necessary fasteners and accessories complete As per directed by engineer In charge

Providing & fixing khanapuri or equivalant wire cut burnt brick masnory with conventional / IS type as a claddding in cement mortar 1:4 including scaffolding raking out joints & providing grooved pointing with cement mortar 1:3 using pigment of approved shade having width & shape as per directed by engineer Incharge .Sample needs to be get approved from project architect before execution of work.as directed by engineer-in-charge.

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - III Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate)

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete.

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) rates)

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from departmental Land)

Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Auditorium Hall C P & Sanitary Fixtures & Fittings Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.

Auditorium Hall Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.

Auditorium Hall Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Auditorium Hall Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Auditorium Hall Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete.

Auditorium Hall Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Auditorium Hall Providing and fixing sink cock with regular swinging spout (Wall / floor Mounted Model) with wall flange having flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Auditorium Hall Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Auditorium Hall Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Auditorium Hall Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Auditorium Hall Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete.

Auditorium Hall Providing and fixing wall mixer with overhead shower,shower arm,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Auditorium Hall Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.

Auditorium Hall Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete (As per IS 13592-1992 Type B, 6 kg/sq.cm pipes are recommended for use in soil and waste discharge system)

Auditorium Hall Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (As per IS 13592-1992 Type B, 6 kg/sq.cm pipes are recommended for use in soil and waste discharge system)

Auditorium Hall Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Auditorium Hall Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Auditorium Hall Providing and fixing 15 cm rigid PVC (Multi Floor trap including SS Grating, water seal not less than 50 mm) ,bend,connecting piece of UPVC pipe up to the outside face of wall , making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Auditorium Hall Water Supply System Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Auditorium Hall Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Auditorium Hall Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Auditorium Hall Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Auditorium Hall Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Auditorium Hall Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Auditorium Hall Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Auditorium Hall Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Auditorium Hall Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Auditorium Hall Providing and laying in trenches 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 3.89 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and laying in trenches 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 4.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and laying in trenches 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and laying in trenches 80 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Providing and laying in trenches 100 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 14.74 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Auditorium Hall Construction of B.B. Masonry chamber for water meter of following size including excavation, cement concrete bedding of 150 mm thick and plastering with cement mortor 1:3 from inside and outside and fixing air tight RCC covers (heavy duty) including curing etc.complete as per direction of engineer-in-charge.chamber size 1200mm x 750mm

Auditorium Hall Providing and fixing 100mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber].

Auditorium Hall Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram)

Auditorium Hall Providing and fixing 40mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber].

Auditorium Hall Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Auditorium Hall Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

External Drainage & Rain Water System Providing supplying in standard length 150mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 200mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 250mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 300mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 400mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 500mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 600mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

Providing supplying in standard length 800mm(PE material) Structured-Wall plastic piping system for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect,etc.complete.

SN8 150mm Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Auditorium Hall Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Auditorium Hall Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing laying, jointing & testing Perforated UPVC SWR type B pipes with 6 to 8 mm holes on the ¾ circumference of the pipe for sub soil drainage of the courtyard. Provision of geo textile wrapping on the pipe & 10 to 15 mm pebble to prevent ingress of fine particles, shall also be made & the installation shall be to the direction of the landscape consultant & made good to the satisfaction of the Project Manager. 100 mm dia pipe

Supply , Installation along with all the accessories and fitting assembly for CI Dome type drain outlet with cast Iron dome covered with stainless steel mesh screen , Clamping collar with integral gravel guard all in one inetgral assembly with the outlet size as specified in the tender & drawings (for landscape surface drain) 100mm dia

Auditorium Hall Providing , constructing and fixing 600 mm dia. Inspection chamber made up of Polypropylene / polyethylene material Having 315 mm diameter inlet(s)/outlets and with eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of 5 mm and 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc.complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Auditorium Hall Constructing Catch Pits of size 600x600mm for collecting storm water of following depth in first class B.B. Masonry in C.M. 1:6 including excavation, laying PCC (1:4:8) bedding 150 mm thickr foundation and bedding projecting 75mm, providing 20mm thick cement plaster (1:3) from inside & outside and Pre-cast factory manufactured RCC perforated cover with frame (medium class) and finishing with cement punning etc all complete as per drawings, specifications and directions of the engineer-in-charge.

Auditorium Hall Constructing Catch Pits of sizeD- 600mm for collecting storm water of following depth in first class B.B. Masonry in C.M. 1:6 including excavation, laying PCC (1:4:8) bedding 150 mm thickr foundation and bedding projecting 75mm, providing 20mm thick cement plaster (1:3) from inside & outside and Pre-cast factory manufactured RCC perforated cover with frame (medium class) and finishing with cement punning etc all complete as per drawings, specifications and directions of the engineer-in-charge.

Supply, installation, testing & commissioning of Heavy duty R.C.C. perforated manhole cover with frame of following sizes,600X600MM over the inspection chamber/gully trap/Manholes, as per direction of engineer-in-charge.

Supply, installation, testing & commissioning of Heavy duty R.C.C. perforated manhole cover with frame of following sizes600 mm dia Circular manhole over the inspection chamber/gully trap/Manholes, as per direction of engineer-in-charge.

Providing and laying cast in situ Brick Masonry gutter/ drain with following Excavation in all types of strata upto hard Murum along roads / courtyards including excavation, P.C.C. & fixing of perforated grating Medium duty, over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 300 mm to 1000 mm ) For Basement dewatering

Providing and laying cast in situ Brick Masonry gutter/ drain with following Bed concrete P.C.C. (1:4:8) along roads / courtyards including excavation, P.C.C. & fixing of perforated grating Medium duty, over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 300 mm to 1000 mm ) For Basement dewatering

Providing and laying cast in situ Brick Masonry gutter/ drain with following Plastering 12mm thick C.M. (1:4) along roads / courtyards including excavation, P.C.C. & fixing of perforated grating Medium duty, over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 300 mm to 1000 mm ) For Basement dewatering

Providing and laying cast in situ Brick Masonry gutter/ drain with following Brick Masonry in C.M. (1:6) along roads / courtyards including excavation, P.C.C. & fixing of perforated grating Medium duty, over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 300 mm to 1000 mm ) For Basement dewatering

Providing and laying cast in situ Brick Masonry gutter/ drain with following Top concrete in C.M. (1:2:4) along roads / courtyards including excavation, P.C.C. & fixing of perforated grating Medium duty, over the drain in proper line and alignment, including back fillings, dewatering etc. complete including: (depth varies from 300 mm to 1000 mm ) For Basement dewatering

Pre-cast factory manufactured CI Perforated Cover over the drain (Heavy Duty) (colour and appearance of the grating shall be as per landscape/client/architect)(300mm Wide & 1 M Length)

Supply & installation of Ductile Iron Manhole Covers with frame,& openable hinge of 600mm Dia. (Light Duty) for UGR & OHT including all necessary supports, grouting of the frame in RCC, making arrangements for recessed locking of the Manhole cover etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 150mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 100mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 80mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 65mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 50 mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on both end 32 mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on one end 150mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on one end 100mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on one end 80mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Supply & Fixing in position galvanised iron puddle flanges of approx. 60 cm length withFlange on one end 65mm and welded to mild steel plate (8mm thick) in the centre etc. complete as directed by engineer-in-charge.

Domestic Water Pumps (With Hydro pneumatic Arrangement) Taking delivery from site store, installation, testing and assisting in commissioning of Vertical Inline Pump set installed on common base/skid mounted including all controls, dry run protection, pressure vessel and Control panel as specified & as per approved SLD , power wiring , cable trays & conduits, earthing, accessories, vibration isolators, etc., complete with VFD control panel arrangement as specified and shown in drawing. ( including all Valves & accessories, manifold etc complete)(Total Pumps - 2 Nos.(1 Working +1 Standby ))

Flushing Water Pumps (With Hydro pneumatic Arrangement) Taking delivery from site store, installation, testing and assisting in commissioning of Vertical Inline Pump set installed on common base/skid mounted including all controls, dry run protection, pressure vessel and Control panel as specified & as per approved SLD , power wiring , cable trays & conduits, earthing, accessories, vibration isolators, etc., complete with VFD control panel arrangement as specified and shown in drawing. ( including all Valves & accessories, manifold etc complete)

Irrigation Pumps (With Transfer Arrangement)Taking delivery from site office, installation, testing and assisting in commissioning of End suction Pump set installed on common base/skid mounted including all controls, dry run protection, preessure vessel and Control panel as specified & as per approved SLD , power wiring , cable trays & conduits, earthing, accessories, vibration isolators, etc., complete with DOL control panel arrangement as specified and shown in drawing. ( including all Valves & accessories, manifold etc complete)(Purpose - Pumping System for Cluster Irrigation.)

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

STP Design, supply, erection testing & commissioning of Sewage Treatment Plant 60 KLD using MBBR technology (Electro mechanical )

WTP Design, supply, erection testing & commissioning of Water Treatment Plant

Subwork A Providing Transformer, DG Set, Inetrnal Electrical Installation Supplying, installing, testing and commissioning 11 kV 630A, indoor type ring main unit with 2 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/ trench, etc., as per specification no SW-HTS/RMU

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 1000 kVA, Mineral oil immersed and naturally cooled Intdoor type, Copper wound Non-sealed transformer delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper), with HV tapping (with on load tap changer) on load +5 to -15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 2790 Watts at 50% load, 7700 Watts at 100% load as per IS:1180(part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL. 10-1-10 NOTE 1 1) For indoor type transformer add Rs. 18000/- in rate of transformer.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 81.90 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 690 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based Generator Control Unit (Synchronization panel) panel suitable for diesel generating set of above 400 kVA up to 500 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 240 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HTNOTE 2 2) For round wire armouring increase rate For 11 kV (E) by 28%

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

Supplying and erecting 150 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE 3)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE 3)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG?PW/CW

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG?PW/CW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supply, Installation,Testing & Commissioning of IP20/IK04 LED Architectual round adujstable down Lighter 0-10 V Dimmable . Applications: Product Features: 35Watt 1. COB module, Colour Temperature of 3500K, Frame and in die cast aluminum, CRI 83, 2. Beam Angle 15 degree, Rotation Angle 355 degree, Tilt Angle 35 Degree, 3484 rated lumen output, Matt White trim and cone. 3. Convective heat sink design, high quality Integrated design and cold-forging aluminum, superb heat dissipation. THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Smart Dimmable Driver, Cutout 125mm 4. Patented module match design, widely adaptiveness, safe and easy for operation. 5. IP20, IP44 for option. 8. Life of 50000 burning hours (L85B15) or more. GERD9427W-T OR equivalent, 2 years warantee

Supply, Installation,Testing & Commissioning of IP20/IK04 LED Architectual adujstable down Lighter, 0-10 V Dimmable. Applications: Product Features: 28Watt 1. COB module, Colour Temperature of 3000K, Housing in die cast cold pressed aluminum,CRI 85, high lumen output. 2. Beam Angle 26 degree, Rotation Angle 355 degree, Tilt Angle 130 Degree, 2518 rated lumen output, Matt Black Finish 3. Convective heat sink design, high quality Integrated design and cold-forging aluminum, superb heat dissipation. THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Non Dimmable Driver 4. Patented module match design, widely adaptiveness, safe and easy for operation. 5. IP20, IP44 for option. 8. Life of 50000 burning hours (L85B15) or more,GERD8122WA-T or equivalent 2 years warranty

Supply, Installation,Testing & Commissioning of IP20/IK04 LED Architectual adujstable down Lighter 0-10 V Dimmable . Applications: Product Features: 18-19.3Watt 1. COB module, Colour Temperature of 3500K, Housing in die cast cold pressed aluminum, CRI 85, high lumen output. 2. Beam Angle 31 degree, Glare-cut Angle 30 degree, 1558 rated lumen output, Matt White trim and polished matt cone, 3. Convective heat sink design, high quality Integrated design and cold-forging aluminum, superb heat dissipation. THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Non Dimmable Driver. 4. Patented module match design, widely adaptiveness, safe and easy for operation. 5. IP20, IP44 for option. 8. Life of 50000 burning hours (L85B15) or more, GERD8069W-T or equivalent 2 years warantee

Supply,Installation,Testing & Commissioning of14.2W Round recessed fixed downlighter, Colour Temperature of 3000K, Housing in die cast cold pressed aluminum, CRI 83, Beam Angle 18 degree, Glare-cut Angle 35 degree, 528 rated lumen output, Matt White trim and mirror cone, Life of 50000 burning hours (L85B15), THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Non Dimmable Driver, Cutout 50mm GERD8907WA-T or equivalen. 2 years warantee

Supply,Installation,Testing & Commissioning of 27.5W Track mounted spot light, Colour Temperature of 3000K, Housing in die cast cold pressed aluminum, CRI 85, Beam Angle 26 degree, Rotation Angle 355 degree, Tilt Angle 130 Degree, 2518 rated lumen output, Matt Black Finish, Life of 50000 burning hours (L85B15), THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Non Dimmable Driver GERS5042BC-T or equivalent 2 years warantee

Supply,Installation,Testing & Commissioning of 22.7W Track mounted spot light, Colour Temperature of 3000K, Housing in die cast cold pressed aluminum, CRI 85, Beam Angle 17 degree, Rotation Angle 355 degree, Tilt Angle 130 Degree, 2120 rated lumen output, Matt Black Finish, Life of 50000 burning hours (L85B15), THD<10%, PF>= 0.95, Ripple of < 5%, SDCM Step3, Non Dimmable Driver GERS5059BC-T or equivalent 2 years warantee

Surface mounted track rail, Die Cast aluminum Housing, Black Finish, Length 2 meters with necessary accessories and power supply 2 years warantee

Supply,Installation,Testing & Commissioning of controller module: sould have control provision of lighting control, including shade control, FCU control etc, the protol should have native integration with the dimmer pack and control panel., the module should be of same make as of dimmer channel, this should support DMX- 512 protocol and QL NET, should have USB B type programable port, , ethernet port, 2 nos of minimum port for DMX-512 with 4 pin configuration, should have LED indicator should have LED display it should be able to fit easily with other modules in panel in central location should be able tp craete upto 128 zones as and when required.to support indipedent programing provision. .2 years warranty

Supply,Installation,Testing & Commissioning of 4 Channel Dimmer pack. Any output of this 4 Channel module can be programmed for “phase Dimming” or “0-10V Dimming”. Load capacity each channel is 5A. The Din rail mountable module is totally self-contained with its own integral PSU and can be configured as part of a central system or as a standalone system.

Supply,Installation,Testing & Commissioning of Lighting Control Panel for terminating Dimming/Switching Circuits. Panel accepts a 400V, 3 phase, 4 wires, 100A, and feed via 4P Isolator

Supply,Installation,Testing & Commissioning of 8- Button control plate’s Push-button type are available in (white/Black) finishes. Each button is programmable as per requirement. All plates flush mount into a standard MK891 back box. All the buttons of keypad are programmable with raise/ lower functionalities .

Supplying, fixing and commissioning of recessed uplighting Exterior Rated IP66- IP67 Gea Power LED Pro U220mm Efficiency LED, Luminaire total power: 28.9W, Operating Voltage / frequency: 100-240V/50-60Hz, inrush current 45A inrush time 0.45 MS, Power factor of 0.92, Inbuilt Dynamic DMX controller included in fixture, Real lumens: 623, Real lm/W: 22, Correlated Colour Temperature (CCT): RGBW, UGR: <=16, Structure material: Aluminium Structure finish: AISI 316 stainless steel Diffuser material: Tempered glass Diffuser finish: Transparent Driver Brand: MEANWELL, Dimming protocol: DMX RDM Power Factor: 0.92 including driver having mouting arrangement , Life class of 50,000 Hrs. at L80B20 complete with 3 Years warranty

Supplying, fixing and commissioning of Spotlight IP66 Cube Pro 4 LEDS LED 16W RGBW Inbuilt Dynamic DMX controller included in fixture, Urban grey 997lm, Real lumens : 997, Real lm/W : 62, Correlated Colour Temperature (CCT) : RGBW, Lens / reflector angle : SPOT 16r UGR : <=16, Structure material : Aluminium Structure finish : Urban grey Diffuser material : Glass Diffuser finish : Transparent, Voltage / frequency : 24VDC Dimming protocol : DMX Power Factor : 1.00 Useful life : 50.000h L80B20 with of external rated meanwell driver 24V - 200W - constant voltage, Operating Voltage / frequency: 100 - 240V/50-60Hz inclusive of Dynamic DMX controller Warranty: 3 years, Resistant to marine environments: Yes

Supplying fixing and commissioning of External rated Led strip On Performace 9.6W/m, 48W per 5 meter, RGBW CRI 80 IP65 2576lm per 5 meter, Lens / reflector angle: HORIZONTAL 112r, Equipment necessary but not included, Voltage / frequency: 24VDC Useful life: 50,000h L80B20 with external rated meanwell driver 24V - 150W - constant voltage, Operating Voltage / frequency: 100 - 240V/50-60Hz, inclusive of Dynamic DMX controller Warranty: 3 years with aluminium extrusion

Supplying, fixing and commissioning of Extrnal rated Led strip 3 mtr Asai Top Bend RGBW 1000mm 19.2 W RGBW IP67Red / Green / Blue: 4W/m. Neutral White: 7.2 W/m. RGB +NW: 19.2W/m. Lumens :- Red: 69.94lm, Green: 179.68lm Blue: 44.35lm RGB: 271.91lm NW: 319.86lm, Color Temperature (CCT): Red: 1001k Green: 7889k Blue: 100000k RGB: 14068k NW: 3861k, Structure material: PVC, Diffuser material: PVC Diffuser finish: Semitransparent, Useful life: 50,000h L80B20 Warranty: 3 years with mounting clipv including driver with aluminium extrusion

Supplying, fixing and commissioning of of external rated Lineal lighting system IP65- IP67 Mex Surface Big LED 24, Luminaire total power: 24W, Real lumens: 370, Real lm/W: 15 Correlated Colour Temperature (CCT): RGBW, Lens / reflector angle: FLOOD 71r UGR: <=19, Structure material: Aluminium Structure finish: Urban grey Diffuser material: Glass Diffuser finish: Transparent including driver having mouting arrangement with Warranty: 3 years

Supplying, fixing and commissioning of Reccessed of external rated Lineal lighting system IP65- IP67 Mex Recessed Big LED 24, Real lumens: 370 Real lm/W: 15, Correlated Colour Temperature (CCT): RGBW, Lens / reflector angle: FLOOD 71r, UGR: <=19 Structure material: Aluminium Structure finish: Urban grey Diffuser material: Glass Diffuser finish: Transparent Equipment necessary but not included Voltage / frequency: 24VDC Useful life: 50,000h L80B20 including driver having mounting arrangement with Warranty: 3 years

Supplying, fixing and commissioning of DMX Controller for controlling RGBW Luminaires for powerful show storage and should work as a playback device capable of delivering light.Each shows to installations with up to 6000 DMX universe having 8 ports . The key features for the controller are as follows - Housing Steel : Aluminium, Input Voltage - 90-264V AC/50 60 Hz , IEC Classification : Class I , Communication Portocols : TCP/IP/, Art-Net, Control Versions : DMXS12, DMX512/RDM , Power Consumption : 300W, Number of Universes : Up to 6000, Net weight : 8.5 kh, Temperature Range : 0°C to 40°C. Humidity Range : 10 to 85% ( no condesation), Protection Rating : IP20, Certification : CE, CB,CQC with Warranty: 3 years

Supplied and erected Chandelier 400 mm hanging crystal 12 W 230 V E14 LED bulb ( warm white)-10 nos complete set with accessories with following specification: 1. Special features: Energy efficient, LED light,Laser cut design 2. Product dimensions: Height: 250 mm and diameter : 400 mm Chain length: up to 50 inch 3. Product Material : Metal part in matte gold finish , This crystal pendant light fixtures uses high grade glass crystals and metal frame for long lasting shine and durability . the combination of both creates more sparking effect, The high quality of handmade metal frame can make sure that the construction of the jhoomer is more durable and trustproof 4. Finish type : Powder Coated 5. Light direction : Uplight /downlight 6. Area covered : approx. 60-100 sqft 7. Connectivity Protocol: Wired s 8. Shape: Drop Point 9. Product Weight : Approx.5.5 Kg

LED Concealed Foot Light (2.1.12) Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Supply Installation, testing and commissioning of 5W/ MTR TsukiLED Strip light fixture (Dimmable) equivalent to Phillips make Philips FlexCove - LS170S Tsuki48W LED4 8 27 IP20 L5000 G4 - Dimmble (400 Lm/w)

Supplying and erecting Navi spot 50W LED, Dimension :Ø166 x 156 x 567mm, 2700K,4000K,5700KBA:45°,28°,10°,Polycarbonate Optical Lens, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 3 kV,Life class of 60,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 5 years warranty.(KL-6805 or Equivalent)

Supplying and erecting Diya 20W LED, COD :Ø130mm, 2700K,3000K,4000K,6500K Beam Angle:45°, TranslucentPolycarbonate Optical CoverC.O.D : Ø130mm CRI>80, CCT upto 6500K, max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 60,000 Hrs. at L70B50, including driver, IP- 65 SDCM<3, MacAdam, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 5 years warranty.(KL-4242 or Equivalent)

Supplying and erecting Twister / Track Light 25W LED, Dimension: Ø71 x 127mm, WW,NW,CW Beam angle :15°,50°, die-cast Alluminium diffuser poly optical ClearPolycarbonate Optical CoverØ71 x 127mm CRI>80, CCT upto 6500K, max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV,Life class of 60,000 Hrs. at L70B50, including driver, IP - 20 having mounting arrangement with board for surface type or spring loaded mounting clips complete with 5 years warranty.(KL-3207)

Supplying and erecting Linear WallWasher, , Wattage : 72WLED, Non Integral. WW,CW Beam angle 15x60°/30° diamention-1000 x 48 x 118mm CRI>80, CCT upto 6500K, Beam Angle of 30/15/60 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 3 kV,Life class of 60,000 Hrs. at L70B50, including driver,IK-07, IP-65, SDCM<3, MacAdam, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 5 years warranty.(KL-3066 or Equivalent)

Supplying and erecting path finder light Sudo Extended - Grid Frame, COD : 479 x 83 x 71mm, Wattage : 24W LED. CRI>80, CCT upto 6500K, max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 60,000 Hrs. at L70B50, including driver, IP-65,SDCM<3, MacAdam having mounting arrangement with board for surface type or spring loaded mounting clips complete with 5 years warranty.(KL-2769 or Equivalent)

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF NOTE

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. 60Kg/Kw PV & GI raceway for Networking

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - MAIN LT PANEL Duty -Duty: Indoor Type (IP 42) Incomer-2 Nos of 1600A FP MDO ACB, Busbar - 1600A FP Al Busbar Outgoings - 800A FL ACB 2 NOs, 630A FP MCCB 2 NOS, 400A FP MCCB 2 NOS, 250A FP MCCB 2 NOS, 200A FP MCCB 2 Nos, 100A FP MCCB 1 NOS with SPD, MFM, all indicators showing status of ON, OFF, TRIP, complete as per schematic

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - FLOOR PANE:Audi Panel & Conference Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 800A FP MCCB Busbar - 630A TPN Al Busbar Outgoings - 2 NOS 100A FP MCCB, 2 NOS 200A MCCB, 2 NOS 250A FP MCCB, 2 NOS 400A FP MCCB & 630A FP MCCB 2 NOS, 63A FP MCCB 4 NOS, with dual sourse MFM, indiicators SPD and all accessories complete as per schematic

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - DG PANEL Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 800A FP MCCB, Busbar - 1600A TPN Al Busbar Outgoings - 1 NOS 1600A FP aCB & 630A FP MCCB with AMF, Indicators, SPD, etc as per schematic

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - LIFT PANEL Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 200A FP MCCB, Busbar - 200A TPN Al Busbar Outgoings - 8 NOS 63A FP MCCB & 16A DP MCB as per schematic

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - HVAC PANEL Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 630A FP ACB, Busbar - 630A TPN Al Busbar Outgoings - 6 NOS 400A FP MCCB, 250A FP MCCB 2 NOS, 2 NOS 100A FP MCCB & 200A FP MCCB 6 NOS WIH SPD ALL INDICATORS, DLM ETC. as per schematic

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying & erecting Dewatering Monoblock pump set 415V, 3 phase, 50C/s, A.C. supply of 2.25KW/ 3 H.P., of 12 to 26 m head with 560 to 70 LPM discharge, 10.5mm Solid Handling Capacity, non clogging minimised abrasive wear, large impeller clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber,. etc. complete as per specification no. DWP- SMP

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.

Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying & erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)

Supplying & erecting minimum three & above star rated Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 7.5 KW/10 HP with discharge 1150/600 Litres per Minute (LPM) for head of 24/69 m and 65 mm suction/ 50 mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 28-42 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s. A.C. supply, having delivery head from 57 to 22 m and discharge from 120 to 900 litres. . per minute & pipe of Suction 75 mm/Delivery 65 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

(Subwork B) Providing Lifts and Escalators SITC of Electric Traction Passenger Lift with · Rated capacity :- 14 Passenger/952Kg · Floors :- G+3 floor (4 Stops/4 Landings) · Travel :- 17.6 mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1600 mm wide x 1400 mm deep x 2250mm high · Lift shaft available having clear size of 2750mm wide x 1800mm deep, pit depth-1500mm, Overhead height -4500mm · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. • Clear Car size of 1600 mm wide x 1400 .mm deep x2250 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. A1 -For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. B1 For Full Collective control system, add as below. 1 For Lift travelling above First floor & up to Sixth floor( 1531615+(141837 x 2)+27340)=1842629)

SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 12 mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1100 mm deep x 2250mm high · Lift shaft available having clear size of 2000mm wide x 1800mm deep, pit depth-1500mm, Overhead height -4500mm · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. • Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.· Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. B1 For Full Collective control system, add as below. 1 For Lift travelling above First floor & up to Sixth floor( 1087600)

SITC of Electric Traction Passenger Lift with · Rated capacity :- 20 Passenger/1360Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 12 mtrs · Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1200 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1100 mm deep x 2250mm high · Lift shaft available having clear size of 3000mm wide x 3000mm deep, pit depth-1500mm, Overhead height -4500mm · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. • Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

SITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/control/data cabling laying in rigid PVC conduits/trunking etc. complete

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring (1.7.19) Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

SITC of Indoor Escalator with following specifications: STEP WIDTH: 1000 mm HORIZONTAL/FLAT STEPS: 2/2 INCLINATION: 35 deg VERTICAL RISES: 5850 mm Horizontal distance between end supports- upto 13250 mm Operational Speed: 0.5 m/s (+-10%) TRASPORTATION CAPACITY: 6000 P/H MAIN POWER SUPPLY: 3 × 415 V (-10% to +6%) at 50 Hz (±2 Hz), 240 V lighting supply BALUSTRADE TYPE: 10mm thick Tamperred Glass (Slim Type) BALUSTRADE HEIGHT: 1000mm HANDRAIL MATERIAL: Synthetic Rubber with Nylon Linning (Black) DECKING [INNER & OUTER]: Stainless steel SKIRTING: Sheet steel with black anti-friction coating ACCESS/LANDING COVER: Ribbed aluminum with natural color STEP TYPE: One piece die cast Aluminum STEP COLOR:Silver STEP DEMARCATION: Yellow painted lines at three sides COMB SEGMENT: Aluminum with plastic inlay LOAD DEFLECTION: Max 1:750 TRUSS STRUCTURE: Hollow profiles, L-profiles and U-profiles MOTOR: 3-phase, 6-pole induction motor and F insulation with IP55 protection Drive: VVVF GEAR BOX: Worm gear HANDRAIL DRIVE: Friction drive wheel via pressure rollers BRAKE : Operational brake DRIVE CHAIN: Duplex drive chain STEP CHAIN: Precision roller type, with heat-treated links CONTROLLER TYPE: Microprocessor based PCB CONTROLLER CABINET: Steel Cabinet with IP 54 protection OPERATION MODE: Automatic start / stop Other Features: Comb plate impact devices, Handrail inlet switches, Step sag switches, Broken step chain switches (chain tension control switches, lower), Motor speed monitor (overspeed, under-speed, unintentional reverse, and braking deceleration), Motor thermal protection, Mains supply isolator, Emergency stop buttons beside key switches, Stop switches within upper and lower maintenance pits, Handrail speed and breakage monitor, Access cover safety switches, Mechanical step band lock, Missing step detector, Brake lift monitoring switch, Broken drive chain device, Skirt switches, Anti climb barrier, Step reverse fences, Handrail anti-static roller, Step anti-static brush, Phase failure Indicator, Monitoring contacts, Buzzer alarm, Fire alarm relay, Wrong direction warning.Traffic light, Comb light.

(Subwork C) Providing Street Lights Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OH?PL/HM (excluding luminaries)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3m to 5m high octagonal /conical GI pole).

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multistra nded copper Industrial cable for voltage grade up to 1.1 kV ( 106 Poles x 4 mtr = 424 m ) ( 2 Highmast 14 mtr x 12 = 168 Total --592 )

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing Supplying and erecting 3.5 to 4 mtr decorative pole including 60W Luminaire body made of spun aluminium with extruded aluminium alloy (grade 6063) and non corrosive SS fasteners Shielded light Non yellowing UV stabilized translucent acrylic diffuser Silicone gasket Die cast aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel pole of 3.5 mtr installed on provided foundation for extra guarantee against corrosion Luminaire can be aligned on the mounting plate around 360 Cable entries for through-wiring of mains supply cable Integral constant current power supply CRI (Ra) 280 (90 CRI-On Request)Prewired with LED driver and suitable for operating on 240V 50Hz single phase ac supply PF>0.95 lumen 1w =100 lumen surge protection -6KV.CCT (Colour Temperature)Available CCT 2700K 4000K 5700K 3 year warranty on luminarie

(Subwork D) Providing Fire Fighting System Supplying, installation, testing and commissioning of Main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual / automatic operation and consisting of following (a)Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b)Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c)M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 200 mm ring main of fire fighting system.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF?FFA/NZ

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no.FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

13-8-14 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying, erecting, testing and commissioning vane type water flow detector 150 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, installing, testing, and commissioning of portable fire extinguishers of ABC dry powder stored pressure type fire extinguishers of 6 Kgs.capacity Complete with standard discharge valve with tube, CI bracket for wall mounting etc. complete as per confirming to IS : 15683 complete all the work up to the satisfaction of the Engineer in charge.

Supplying, installing, testing, and commissioning standard response Pendent / Upright type sprinkler (Standard coverage) quartzite bulb type with 15mm screwed end connection of 68 deg. C.tempersture rating K-80 and orifice shall not be less than 6mm sprinklers shall be UL listed approved with chrome finished. complete all the work up to the satisfaction of the Engineer in charge.

Supply and Installation of CP Brass, 15mm inlet spray pattern, open standard response sidewall type sprinkler heads with quartzoid bulb with temp rating of 68 deg. C .K value of sprinkler shall be 80, Sprinkler head shall be UL approved.

Supply and Installation of CP Brass, 15mm inlet spray pattern, open standard response sidewall type sprinkler heads with quartzoid bulb with temp rating of 79 deg. C .K value of sprinkler shall be 80, Sprinkler head shall be UL approved.

Providing and fixing in position statutory Signage's made out of 3mm thick opaque PVC foam board, machine cut, non reflective, auto glow (type & Make), with silicon adhesive for safe evacuation of occupants in case of emergency. Sign indicators should be provided at prominent places as per Fire Provisional NOC (As per - IS-9457, IS-12349, IS-12407). complete all the work up to the satisfaction of the Engineer in charge.

Providing, laying, testing & commissioning of 80mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Providing, laying, testing & commissioning of 150mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF?AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal / heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and fixing 36U floor mount rack (Dimension-DxWxH –800x600x1600 mm) as per specification No. WG-NAS/RAK

Supply, installation, testing & commissioning of 6 Watt Cone type Ceiling Mounted metal grill Speakers with line matching transformer, Power tapping: 1.5W/3W/6W, Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB, including screw clamp mounting with required accessories. (Colour - White)

Supply, Installation, testing and commissioning of 6 Watt Box type Wall / Surface Mount Speaker with line matching transformer, Power tapping: 1.5W/3W/6W, ABS or metal body, Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB, including required mounting accessories.

Supplying, installing, testing and commissioning 15W PA Column Speakers with 15W RMS power in aluminium extruded cabinet, Moulded Plastci Covers & Metal mesh grill, frequency response 150-15,000Hz, operates on 100V line with power taps of 15/10/5/2.5W in black or white color,With Mounting clamps & Necessary hardware complete.

Supply, installation, testing & commissioning of 10 Zone Voice Alarm PA Controller with built in audio message generator (multi message), 10 Zone 70/100V live outputs for Speaker circuit, Fireman Microphone, Pre-recorded evacuation messages, Should be able to send 2 different pre-recorded messages simultaneously (message should be in 3 languages English, Hindi & Marathi), Phased evacuation, 10 supervised input contact relays for integration with Fire Alarm Control Panel, Up to 6 call stations can be connected together with controller. The controller should integrates multiple functions such as audio storage, playback, zone control, audio monitoring, scheduled broadcast and fault diagnosis, audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover etc. complete with cords, connectors & required accessories.

Supply, installation, testing & commissioning of 480 Watt, high efficiency Power amplifier, 70/100V loudspeaker output voltages, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter with cords, connectors, power supply & required accessories.

Supply, installation, testing & commissioning of Audio Music Player with built in USB port, SD card, support MP3 & other audio formats, complete with cable, cords & required accessories.

Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1.5 sqmm speaker wire in provided trunking/conduit etc.

(Subwork E) Providing HVAC System Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2.0 TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50Hzs, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer ferr operation & temperature display on indoor unit, noise level max. 50dBA at position ( IDU & ODU mounting stands) as per specification no. APAC/ WAC

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS complient suitable for refrigerant system having 22SWG thickness and inner dia / size 16 mm complete.

Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 24HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 28HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 systems of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units, having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitations, history function complete erected on wall integrated with provided fire alarm system.

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit / dampers / ducting of suitable size with fire resist flexible double canvas sleeve complete.

Providing and applying of adhesive thermal insulation for supply return air duct with 19mm nitril rubber insulation having R-value as per the prevailing provisions in ECBE-2017.

Providing and applying of acoustic insulation for air duct with 25mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheeets complete.

Supplying and installatiing of collar damper of GI material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size.

Supplying and installatiing of high pressure grade required size copper connection Y or T - joints / refnet complete erected on wall/ ceiling with supports/raceways, nitrile rubber insulation, painting, etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditing system,

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without coller dampers having matching colour with the existing false ceiling and suitable for deflection of 15॰/30॰/45॰, (150mm height)

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. ( Ducting = 22G )

Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetin (Ducting = 24G )

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixedmagnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting Fully Automatic Star/delta starter suitable for above 15 H.P. up to 25 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 H.P.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 20500CFM / 70mmWg / 21.7TR

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 18500CFM / 50mmWg / 41TR

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 13500CFM / 50mmWg / 40TR

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 9000CFM / 50mmWg / 28TR

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 8000CFM / 50mmWg / 28TR

Supply, Installation, Testing & Commissioning of ceiling suspended Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc.The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 6500CFM / 50mmWg / 22TR

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 4000CFM / 40mmWg/10TR

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 10500CFM / 40mmWg

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 12000CFM / 40mmWg

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 15000CFM / 40mmWg

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 28500CFM / 40mmWg

Supply Installation testing commissioning of 2 way 15/30° deflection aluminum extruded supply and return air grille with four side flange. The supply grille should be fixed with crews in duct dropper. ( 350x350mm neck size) for auditorium/multipurpose hall

Supplying, erecting, testing and commissioning of aluminum extruded powder coated toilet exhaust 4 side flanged grill with aluminum coller damper with air control mechanism of 200x200 size

Supplying, erecting, testing & commissioning exhaust air system, ductable circular inline exhaust air fan inlet unit having 500 cfm capacity with maintaining the static pressure minimum 30mm suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete.

Subwork F) Providing CCTV and Networking System Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table.

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW

Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specificationno. WG-TW

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 μm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS

Supplying, fixing, and configuring 20 (1G-RJ45) ports + 4 combo 1G ports + 4 10G (SFP+) ports, Layer 3 switch, SI Image, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.

Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch, 370W, 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver (up to 550m, support 3.3V power) erected in provided rack complete.

Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete.

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 12 ports light guide unloaded interconnect unit,rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500mm) as per specification No. WG-NAS/RAK

Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635mm) as per specification No. WG-NAS/RAK

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 6 U IP66 outdoor mount server rack with pole mount bracket (Dimension-DxWxH - 500x600x350 mm) as per specification No. WGNAS/RAK

Supplying and fixing dual-band POE 3x3 Mesh Router, 802.11 n/ac, standalone/software based access point complete.

Supplying, installing and activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete.

Supplying and fixing 2 m Telephone patch cord of RJ11 type

Supplying & erecting approved make High definition 4/5 Megapixel IP IR Varifocal Dome Camera with following features Image Sensor : minimum 1/2.8" Progressive Scan CMOS, Video Resolution: minimum 2592 x 1520, Video Compression: H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate: minimum 25 fps at all resolutions , WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant. minimum IR distance : 50m, Lens Type: 2.8 - 13mm Lens, auto/motorized varifocal focal, Lux sensitivity- minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 30m, Support 12VDC & PoE, IP67/IP66, IK10, built in micro SD/SDHC/SDXC card slot of min 128 GB, built in microphone. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature (-30 to 60° C), UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. with all accessories complete.

Supplying & erecting of High definition 4/5 Megapixel IP IR varifocal Bullet Camera with following features Image Sensor : minimum 1/ 2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520, Video compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate : minimum 25 fps at all resolutions. WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type: 2.8 - 13mm Lens, auto/motorized varifocal focal, Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 50m, Support 12VDC & PoE, IP67, IK10 – Vandal Resistant, built in micro SD/SDHC/SDXC card slot of min 128 GB, built in microphone. Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events: Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ). UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. with all required accessories complete.

Supplying, installing, testing & commissioning of 32/40 Ch Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI1/VGA1 outputs, provided Atleast one HDMI output of 4K resolution, atleast one VGA output with output up to 1920x1080, Support H.265 or higher, H.264, MJPEG, Supports Redundant Dual Power, Incoming Bandwidth 320 Mbps with minimum 8 SATA ports, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps self-adaptive Ethernet interface, support multibrand network Cameras, ONVIF conformance, Multiple network monitoring: Web viewer. support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc.

Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified with required accessories.

Supplying & erecting 43" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc.

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF ALLIR ONE COMPUTER FOR FACTOR - ALL-IN-ONE PROCESSOR TYPE CORE I5 FAMILY PROCESSOR SPEC 2.3 GHZ, RAM 8 GB MEMORY TECHNOLOGY DDR4, 2HDMI PORT, COMPUTER MEMORY TYPE GDDR4 HARD DRIVE SIZE 1 TB HARD DISK DESCRIPTION HDD HARD DRIVE INTERFACE SERIAL ATA SSD 256 GE ADDITIONAL GRAPHICS COPROCESSOR INTEL UHD GRAPHICS 630 GRAPHICS CHIPSEL, CONNECTIVITY TYPE BLUETOOTH WIRELESS TYPE BLUETOOTH 801.11AC. HARDWARE PLATFORM WINDOWS OPERATING SYSTEM WINDOWS 10 PROFESSIONAL WARRANTY - 3 YEARS

Supplying and erecting M.S. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

(Subwork G) Providing Audio Video and Stage Lighting System Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying, erecting, testing and commissioning rust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mm height and sturdy mechanism ensuring trouble free movement complete

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON

Supply and fixing of twisted 1.5 Sq.mm speaker cable for Ceiling Speakers

Line Array Loudspeaker Hanging Bracket With Accesaris

Power Amplifier Two-channel, 2100W @ 4Ω Power Amplifier Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 16.2" Weight 24 lbs (10.9 kg) Shipping Weight 30 lbs (13.6 kg) IEC Power Connector 20A

18 in. High Power Flying Subwoofer 18 inch, 2268H Differential Drive® woofer for extended low-frequency output Large port area for reduced distortion 20 mm threaded pole socket for solid, secure satellite speaker mounting Specifications Power Rating 800 W / 1600 W / 3200 W Frequency Range 31 Hz – 220 Hz Dimensions (H x W x D) 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in) Frequency Response (-10dB) 31 Hz – 220 Hz Recommended Crossover Frequencies 80 Hz, 24 dB / octave HPF80 Hz, 24 dB / octave LPF System Maximum SPL 130 dB SPL peak System Sensitivity (1w @ 1m) 95 dB SPL LF Driver 1 x JBL 2268H 457 mm (18 in) Differential Drive woofer Nominal Impedance 8 ohms Active Tunings Tunings available at www.jblpro.com Enclosure Rectangular, 18 mm, 13-ply birch plywood Suspension / Mounting Optional VRX932LA-AF line array frame kit or 10mm eyebolt Finish Black DuraFlex™ finish Grille Powder coated, black, 16-gauge perforated steel with acoustical transparent charcoal foam backing. Inputs Neutrik® Speakon® NL-4 (x2)

Supplying, Installation, Testing & Commissioning Stage Moniter Speakar Professional Powered Two-Way 12-inch PA Loudspeaker Features Transducers: 912G 12” ferrite magnet woofer JBL 2408H-2 1.5" poly-annular diaphragm compression driver Updated JBL image control waveguides improve dispersion Low-noise, low-distortion gain staging design Lightweight, efficient Class D amplification Power: 2,000 watts peak/1,000 watts RMS Frequency response: 50 Hz–20 kHz @4pi (-10 dB); 65 Hz–17 kHz @4pi (-3 dB) Dispersion: 90° x 50° Max SPL: 132 dB Crossover frequency: 2,050 Hz Specifications Frequency Range (-10dB) 50 Hz - 20 kHz (4π) Frequency Range (-3 dB) 65 Hz - 17 kHz (4π) Coverage Pattern 90° x 50° Transducer Impedence Rated: Woofer: 4 Ω Tweeter: 8 Ω Max SPL 132 dB Power Rating 2000W peak / 1000W RMS

Compact 2-way Loudspeaker with 2 x 8” LF Features 1” Exit Compression Driver with PT™ Waveguide 205 mm (8 in) LF transducer Compact enclosure 750W Program Specifications Frequency Range (-10dB) 53 Hz - 20 kHz Frequency Response (±3 dB) 65 Hz – 20 kHz System Power Rating 700 W (AES rated) 375 W / 750 W / 1500 W (Continuous/Program/Peak) (IEC rated) Impedance 8 ohms Coverage Pattern /26: 120° x 60°/95: 90° x 50° Dimensions (H x W x D) 679.5 x 237.5 x 254.0 mm (26.8 x 9.4 x 10.0 in) Net Weight (each) 18.6 kg (40.9 lb) Crossover Modes Passive Maximum SPL (1m) 120 dB System Sensitivity (1w @ 1m) 94 dB SPL

Two-channel, 1200W @ 4Ω Power Amplifier eakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 1600W 2Ω, 1200W 4Ω, 650W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A

Supplying, Installation, Testing & Commissioning JBL Professional MTU-28 U‐Bracket for AC28/xx Two-Way Loudspeaker

Supplying, Installation, Testing & Commissioning of Professional Quality Imported Power Amplifier 480 W with Built in Temperature controlled Fan, Overload Protection Short circuit Protection Voltage 1.00 Each 67643.00 67643.000 INR Sixty Seven Thousand Six Hundred & Forty Three Only Overload Protection, Short circuit Protection. Voltage 24 VDC +15% / -15%, Current max 30 A, Performance Output power (rms/maximum) 480 W / 720 W, Power reduction on backup power -1 dB, Frequency response 50 Hz to 20 kHz (+1/3dB @ 10 dB, ref. rated output) Distortion <1% @ rated output power, 1 kHz, S/N (flat at max volume) >90 dB Make-Bosch/Mipro/Ev

32-Channel Premium Mixing Console 24 Mic Inputs with 48V Phantom Power and HPF per Channel 32 Line Inputs (24 mono and 4 stereo) 6 AUX Sends + 2 FX Sends 4 GROUP Buses + ST Bus 2 Matrix out 1 Mono out

Vocal Microphone Frequency response tailored for vocals, with brightened midrange and bass rolloff Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise Pneumatic shock-mount system cuts down handling noise Effective, built-in spherical wind and pop filter Supplied with break-resistant stand adapter which rotates 180 degrees Legendary Shure quality, ruggedness and reliability Cardioid (unidirectional) dynamic Frequency response: 50 to 15,000 Hz

Boundary Microphone SPECIFICATIONS Frequency Response (Figure 1)-50 to 17,000 Hz Output Impedance EIA Rated at 150 Ω (180 Ω actual) Sensitivity (at 1 kHz, open circuit voltage) Cardioid Cartridge: –27.5 dBV/Pa (42.2 mV) Supercardioid Cartridge: –26.5 dBV/Pa (47.3 mV) Omnidirectional: –22.0 dBV/Pa (79.4 mV) 1 Pascal=94 dB SPL Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 kΩ load) Cardioid: 117.0 dB Supercardioid: 116.0 dB Omnidirectional: 111.5 dB Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 71.0 dB Supercardioid: 72.0 dB Omnidirectional: 76.5 dB Preamplifier Output Clipping Level –6 dBV (0.5 V)

Overhead Microphone SPECIFICATIONS Frequency Response (Figure 1) 50 to 17,000 Hz Polar Pattern (Figure 2) Output Impedance EIA Rated at 150 Ω (180 Ω actual) Sensitivity (At 1,000 Hz, open circuit voltage*) Cardioid: –35.0 dBV/Pa (17.8 mV) Supercardioid: –33.5 dBV/Pa (21.1 mV) Omnidirectional: –27.5 dBV/Pa (42.2 mV) *1 Pascal = 94 dB SPL Maximum SPL (1 kHz at 1% THD, 1 kΩ load) Cardioid: 124.2 Supercardioid: 122.7 dB Omnidirectional: 116.7 dB

Podium Microphone FEATURES Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive. Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Interchangeable cartridges provide the right polar pattern for every application SPECIFICATIONS Equivalent Output Noise (A-weighted) Cardioid: 28.0 dB SPL Supercardioid: 26.5 dB SPL Omnidirectional: 20.5 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 66.0 dB Supercardioid: 67.5 dB Omnidirectional: 73.5 dB Dynamic Range at 1 kilohm load 96.2 dB 100 dB at 0 gain Common Mode Rejection 45.0 dB minimum Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V) -12 dBV at 0 gain Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector Power Requirements 11 to 52 Vdc phantom, 2.0 mA Environmental Requirements Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F) Relative Humidity: 0 to 95%.

DriveRack Features INPUT PROCESSING dbx Compression AFS™ (Advanced Feedback Suppression) 31-Band Graphic EQ 12-Band Parametric EQ (with narrow notch capabilities) Subharmonic Synthesis Backline Delay Noise Gate OUTPUT PROCESSING Crossover (supports full range up to mono 6-way systems) 12-Band AutoEQs (8 AutoEQ bands, 4 User bands) dbx Compression Automatic Gain Control Subharmonic Synthesis Noise Gate Tower Delays (up to 1000ms per output) 8-Band Parametric EQs (used for speaker tunings) dbx Limiting Driver Alignment Delays

Speaker Cable, For Twisted, Cable Size: 2.5 Sqmm Usage/Application - Twisted Cable Size - 2.5 Sqmm Type Of Cable - Speaker Cable Electronic, 2 C #14 Str TC, PVC Ins, PVC Jkt, CL3.Electronic, 2 Conductor 14AWG (42x30) Tinned Copper, PVC Insulation, PVC Outer Jacket, CL3

Speaker Cable, For Twisted, Cable Size: 6 Sqmm Audio Cable, 2 Conductor 10 AWG, BC, Unshielded, CL2 Audio Cable, Rated-CL2, 2-10 AWG highly flexible stranded bare copper conductors with PVC insulation, PVC jacket with ripcord

3 pole female/Male cable connector with Nickel housing and silver contacts. Technical Information Product -Title NC3FXX Connection Type XLR Gender female,Electrical,Capacitance between contacts ≤ 4 pF Contact resistance ≤ 3 mΩ,Dielectric strength 1,5 kVdc Insulation resistance > 10 GΩ (initial),Rated current per contact 16 A,Rated voltage < 50 V Make-Newtrick/MX

4 way Satge Box With XLR Chassis Connectors Make-MX/Casting/Newtric

32 way Patch Panel Box With XLR Chassis Connectors Make-MX/Casting/Newtric

4 pole cable connector, chuck type strain relief, dark grey bushing Features & Benefits Current rating 40 A rms continuousUp to 50 A audio signal, duty cycle 50%Only 3 parts, easy to assembleHigh impact materials - long-lasting and reliableEasy and extremely precise locking system "Quick Lock"Improved grip on latch1 piece strain relief, chuck for 7 to 14.5 mm cable O.D.Color coding possibleImproved screw-type termination for highest pull-out forceIntegrated design guarantees

Supplying, installing & testing UTP connector (RJ-45) specification No. WG-NAS/UTPC.

Supplying & installing UTP networking cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC complete

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete

HDMI EXTENDER OVER HDBaseT - 70 METER 4K The 18Gbps HDMI Extender is a tool which extends your HDMI signal over 230ft/70meters to a compatible display. FEATURES HDMI 2.0b (18Gbps), HDCP 2.2, and DVI compliant Video resolution up to 4K2K@50/60Hz (YUV444) 10bit HDR (High Dynamic Range) pass through Supports HDMI High Bit Rate(HBR) audio pass through Supports CEC bypass Supports POH (Power Over HDBaseT) function Transmission distance: Over CAT6 cable (STP/UTP) 70 meters : 1080P @60Hz12bit; 3D1080P@30Hz 12bit; 40 meters : 1080P @60Hz@12bit; 1080P @120Hz@8bit; 4Kx2K@50/60Hz (YUV420), 4Kx2K@50/60Hz (YUV444) Make - Logic/Impression/Aten

Supply installation and commissioning of Laser Projector , 5000 lumens WXGA : size of effective display area- 0.76” (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10, Number of pixels- 3,072,000 (1280 x 800 x 3) pixels, Zoom – Ratio: Approx. x 1.45, Throw ratio- 1.28:1 to 1.88:1, Lens shift Range Vertical +20% to +55%, Lens shift Range Horizontal - +/- 10%, Light source Type- Laser diode, Filter cleaning / replacement cycle (Max.)- 20,000 H , Screen size- Screen size- 40" to 300" (1.02 m to 7.62 m), Light output- 5,000 lm, Contrast ratio -500,000:1, Speaker- 16 W Display resolution- 1920 x 1200 dots , Video signal input- NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p , Keystone correction Horizontal- +/- 30 degrees, Vertical- +/- 20 degrees, INPUT OUTPUT -RGB / Y PB PR input connector:Mini D-sub 15 pin , Audio input connector: Stereo mini jack, INPUT B- HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support, INPUT C- HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support, INPUT D- HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control), VIDEO IN- Video input connector: BNC, Audio input connector: Shared with INPUT A, OUTPUT- Audio output connector: Stereo mini jack, LAN- RJ45, 100BASE-TX , USBTYPE- A, TYPE-B

Supplying, Erecting, Testing and Commissioning of Projector Mount 1) 100% Aircraft Aluminum (6061-T6) Construction 2) All the necessary hardware included 3) Detailed instructions for easy and quick installation 4) Sets the projector approximately 8 inches away from the ceiling 5) Lateral Shift Coupling allows 1-1/2 inches of left/right lateral adjustment Specification Binding : Electronics Brand : PCMD, LLC. EAN : 0008440003452 Label : Projector Ceiling Mounts Direct, LLC. Manufacturer : Projector Ceiling Mounts Direct, LLC. Model : INFOCUS-IN81-LAT-8EXT ProductGroup : CE ProductTypeName : OFFICE_ELECTRONICS Publisher : Projector Ceiling Mounts Direct, LLC. Studio : Projector Ceiling Mounts Direct, LLC Make - Kristal/Logic

Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 11˚ / 25˚ / 35˚ Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) ,RGBW 3W Lamp source x 54 Pcs ,DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified), Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 Flicker Free for high FPS Smooth fade in and Fade out High precision steady color No heat, DmX 512 dimming with 2 Channel 0 ~ 100%, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Data DmX through 3 / 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections Total Power Consumption of 180W Sound Active Mode Control IP20 protection. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) , Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coated Black finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display, Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W Sound Active Mode ControlIP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 , Strobe option Adjustable 1 ~ 25 times / Sec Variable, Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate, In built preset’s for effects Fuse and Internal safety protections, Active Cooling with Low Noise Fan, 5 Pin XLR for DmX, High quality well designed inbuilt reflector, Flicker Free 100% for Tv & Film Cameras, Black finish housing, IP20 protection, Having Strobe option and smooth dimming,illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory.

SITC of 200W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 220W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin xlr Black powder coated fabricated housing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD

SITC of Light Fixture dual safety, Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip

SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems.

SITC of Fixed stage side Ladder as per the design, With an Mild Steel 40NB 48 OD black matt finish. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm. Size of 600mm x 2400mm, Manual movable Made out of 40NB 48 OD Mild steel pipe dual barrel Dual Barrel Arrangement Powder coated with Matt black Texture Single Construction with Cross connecting pipes Cross connecting Pipes at every 600mm Ladder can be moved along the track or adjusted as required, Spud & Trolley, Pivoted or Fixed Suspenders as per site conditions Round pipe welded to create square frame Heavy duty trolly to hold and rotate wing frame Material for the light bar shall be of Mild Steel Pipe. Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Ladder Length shall be of customized type as per site condition.

SITC of Motorised integrated fly bar/winch of 9Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system.

SITC of Motorised integrated fly bar/winch of 9Mtr length Motorized Hanging Mic Bar ,The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system.

SITC of Motorised integrated FOH fly bar/winch of 10 Mtr length Motorized Light bar, The winch shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y,Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG: 62052Z,IP:55, AMB:50 degree. It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5,Single Reduction 7.5:1 to 100:1 and the size shall be 90.It shall have an drive unit base frame to fix the gear box which contains one shaft.This mechanisam shall have drum plate of 300mm x 5mm thickness with 6 groves where the GI wire rope of 5mm can be winded up when the hoist moves up and down. 415VAC Motor with Brake for Motor System to lift a load of 180Kg as a safe working load which should be synchronized with Control Panel. Wifi operated wireless smart working functianailty Dual barrel duly powder coated Made using 40NB dual construction.Matt black texture finish paint to keep them rust free. Powder coated 60 microns black matt finish with proper chemical treatment and methodogy. Wifi based up down lightbar movement Specially designed compact gear box 3phase AC motor with DC Brake 1.5HP. Provided with Necessary pulley, guide pulleys, GI wire rope with winding drum. Compact gear box along with suitable capacity of motor unit. Upper and lower limit controller, Safe working load of 200Kg. Cable management system.

SITC of Power Distribution Electrical panel having a Incomer of 100 A. Floor mount / rack mount / wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures.Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130ement.All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 29 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminum/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivery connectors for the internal terminations and external outgoing connecting pointsCustom built as per specification and project required

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing

SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid.

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing

DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files.

SITC of C Profile MS Hot rolled strips 3mm thick with Added U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machineryDuly powder coated Matt black texture finish paint

SITC of 29-way Power Marhalling Box made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size.

SITC of Auxilary Marshalling Box, made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre glands of suitable size.

SITC of Flat Cable Wire harness required to provide the input power to the sockets on the hoists connecting between grid level circuit box to on hoist circuit box with below specifications: FRLS Multi core Copper cable 18 Cores of Power each with 2.5 Sq. mm copper wires insulated with high insulated material 2 DmX 5 core cableswith low noise Width of the flat cable 120mm approx. Clips at each bending of the cable to act as retractor unit Long life, no breakage, smooth folding

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 12 Core each of 1.5 Sq mm size.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.

SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 15 Mtr x 6.6 Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 15 Mtr x 6.6 Mtr.

SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 14 Mtr x 1.5 Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 10Mtr x 1.2Mtr.

SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 6.6 Mtr x 1.5 Mtr

SITC of On Stage Fixed Valance Bar 14 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

SITC of On Stage Fixed Frill Bar 10Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

SITC of Fixed Wing Structure designed as per site condition for a height approx 6.6 Mtr x 1.5 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable.

SITC of Motorized DMX operated Main Curtain 15 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated

SITC of Motorized DMX operated Rear Curtain 15 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree.The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm DaiUndergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated

SITC of Fixed Cyclorama arrangement of 7 Mtrs straight as per design made up of I Track for complete length with Trollies uniformly distributed along the track at every 200/250mm. All metal parts are powder coated with black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free

SITC of Perforated plastic cyclorama screen with perforation on 1side with gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies. Size:7 x 6.6Mtr

(Subwork H) Providing Solar PV Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 300 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(foundation size for structure 0.3 x0.3x.15x 4nos=.054 for 1 kw x)

Providing & erecting 4 Pole MCCB, 415 V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Shubham EPC Private Limited (BID ID -6639685)