Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.8 LAccepted-Finance COLABA MUMBAI | YAVATMAL | MAHARASHTRA | 445001 | L1 | Accepted-Finance Quoting Lowest rate | |
| 2 | L2₹60 L+₹5.3 L (9.59%)Rejected-Finance 3 CAPRICORN NEST GOBINDA AUDDY ROAD ALIPORE KOLKATA WEST BENGAL 700027 | KOLKATA | WEST BENGAL | 700027 | L2 | Rejected-Finance Quoting Higher rate | |
| 3 | L3₹66 L+₹11.3 L (20.5%)Rejected-Finance 10 10 K S ROY ROAD 10 KIRAN SHANKAR ROY ROAD DALHOUSIE KOLKATA WEST BENGAL 700001 | KOLKATA | WEST BENGAL | 700001 | L3 | Rejected-Finance Quoting Higher rate |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
21 Jun 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Office of the Superintending Engineer, Western Electrical Circle , PWD, Purta Bhavan, 1st floor, Burdwan-713103
Construction of proposed Collectorate Complex at Kalyanpur, Asansol for the office of the District Magistrate, Paschim Bardhaman- --- SITC OF 4 nos. 20/15/8 PASSENGER LIFT
2023_WBPWD_540222_1
WBPWD/SEWEC /AED /NIQ-12/2023-24-2nd call
Open Tender
ELECTRICAL WORKS ORG
Item Rate
90 days
Kalyanpur
Please refer Tender documents.
5 documents required · 5 mandatory
₹1.4 L
Office of the Superintending Engineer, Western Ele
5 Jul 2023
7 Jun 2023
23 Jun 2023
7 Jun 2023
21 Jun 2023
10 Jun 2023
7 Jun 2023 - 9 Jun 2023
9 Jun 2023
Amount
SITC of automatic lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall /floor etc if any, to complete the job as per requirement.
Make : OTIS / KONE / SCHNIDLER/Electromec/ LT Elevator/United Elevator/Escon/Thyssen Krupp/Bharat Elevator Co. Ltd/ Engineers Vertical Services/Escon.
Type : 20 Passenger Service Lift
Load : 20 Passenger / 1360 Kg.
Control: Microprocessor based AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Gearless Machine ; without Machine Room.
Speed : 1.0 Mtr. /Sec.
Floor Served : G + 2
Landing : 3 lands ; All on same sides
Total Rise : 7.2 Mtr. (approx)
Operation : Microprocessor based simplex full collective with or without attenedent.
Signals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type : Monochrome/ Colour LCD / Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside : 1800 mm (W) X 1700 mm (D) × 2400 mm (H)
Car Entrance : Clear Opening 1000mm (W) X 2100mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (18 SWG) with hair line finish with hand rail.
Car Ceiling & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation : Axial fan with anodised aluminium / SS grill.
Car Flooring : Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES :-
ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman switch : Fireman switch placed at ground floor.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.
Car Parking at top floor at idle condition.
Main Wire Rope/ Belt : As per manufacturer's standard conforming to IS.
Auto fan Cut-Off
DIMENSION OF SHAFT & POWER SUPPLY :-
Available Shaft Dimension: 2300 mm X 2650 mm
Pit Depth: 1800mm ( Bidder should visit the site)
Overhead: 4500mm ( Bidder should visit the site)
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
SITC of automatic lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall /floor etc if any, to complete the job as per requirement.
Make : OTIS / KONE / SCHNIDLER
Type : 15 Passenger Service Lift
Load : 15 Passenger / 1020 Kg.
Control: Microprocessor based AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Gearless Machine ; without Machine Room.
Speed : 1.0 Mtr. /Sec.
Floor Served : G + 2
Landing : 3 lands ; All on same sides
Total Rise : 7.2 Mtr. (approx)
Operation : Microprocessor based simplex full collective with or without attenedent.
Signals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type : Monochrome/ Colour LCD / Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside : 1600 mm (W) X 1500 mm (D) × 2200 mm (H)
Car Entrance : Clear Opening 900mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (18SWG) with hair line finish with hand rail.
Car Ceiling & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation : Axial fan with anodised aluminium / SS grill.
Car Flooring : Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES :-
ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman switch : Fireman switch placed at ground floor.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.
Car Parking at top floor at idle condition.
Main Wire Rope/ Belt : As per manufacturer's standard conforming to IS.
Auto fan Cut-Off
DIMENSION OF SHAFT & POWER SUPPLY :-
Available Shaft Dimension: 2300 mm X 2350 mm
Pit Depth: 1800mm ( Bidder should visit the site)
Overhead: 4500mm ( Bidder should visit the site)
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
SITC of automatic lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall /floor etc if any , to complete as required.
Make : OTIS / KONE / SCHNIDLER
Type : 8 Passenger Service Lift
Load : 8 Passenger / 544 Kg.
Control: Microprocessor based AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Gearless Machine ; without Machine Room.
Speed : 1.0 Mtr. /Sec.
Floor Served : G + 2
Landing : 3 lands ; All on same sides
Total Rise : 7.2 Mtr. (approx)
Operation : Microprocessor based simplex full collective with or without attenedent.
Signals : Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator. COP & LOP must have stainless steel face plate silver brushed with surface mounted button with braille. Button : All buttons on car & landing shall be luminous & encoded with braille on/off switch for Lift, fan, light, toggle switch or key switch for automatic/attendent mode of operation. Display type : Monochrome/ Colour LCD / Segmented LCD/ Scroll. Operation Push Buttom for lift maintenance & service should be on top of the car.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside : 1100 mm (W) X 1300 mm (D) × 2200 mm (H)
Car Entrance : Clear Opening 800mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (18SWG) with hair line finish with hand rail.
Car Ceiling & Lighting : Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation : Axial fan with anodised aluminium / SS grill.
Car Flooring : Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door : Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel Centre Opening (COPD) / Telescopic Opening (TSPD) automatic door provided with V3F controlled door drive system with fire rating of 120 min.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES :-
ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection. On overloading condition the lift car will not start with door remaining open and give audio & display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman switch : Fireman switch placed at ground floor.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the lift.
Car Parking at top floor at idle condition.
Main Wire Rope/ Belt : As per manufacturer's standard conforming to IS.
Auto fan Cut-Off
DIMENSION OF SHAFT & POWER SUPPLY :-
Available Shaft Dimension: 1900 mm X1900 mm
Pit Depth: 1800mm ( Bidder should visit the site)
Overhead: 4500mm ( Bidder should visit the site)
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
L. T. ELEVATOR PRIVATE LIMITED
UNITED ELEVATORS PRIVATE LIMITED
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .