Construction of eo awas nagar panchyat maa kamakhya

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:D.S.R 2.6.1 .

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) D.S.R 4.1.8

Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:6 (1 :Cement :6 coar sand )

Brick work with common burnt clay modular bricks of 7.5 in foundation and plinth in:

Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:4 (1 :Cement :4 coar sand )

R,C.C. work with cement approved coarse sand and 20 mm gauge approved stone grit in proportion of 1:1.5:3 mix (1 cement : 1.5coarse sand :3 graded stone aggregate 20 mm nominal size )of strength not less than M-20 in door & window lintel excluding supply of reinforcement & its cutting and binding but including its fixing & binding necessary centering & shuttering etc. & also inc. supply of all materials , labour T.& P. etc required for proper completion of the work .with curing compete.For plinth bend. SI No.287

Reinforced cement concrete work in beams, suspended floors, roo having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size

Mild steel (ribbed tor steel) or I/W in plain work such as reinforced concrete or reinforcement B/w when not I/C over all rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all (Material not Issued to store.SI No. 504

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

E/w in cutting or filling embankment with ordinary soil in 20 cm. layers compacting to meet requirment including ramming and dressing of surface to requried levels and slopes and also including 1.5 mt. lift and cartage distance 3.00Km.including .

12mm thick plaster with cement mortar in proportion of 1:6 consisting one part cement and Six part of Coarse sand mortar.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufactured, over the plastered wall surface even and smooth surface as per DSR-13.26

Finishing walls with Acrylic smooth exterior paint of required new work (Two or more coat applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). Including supply of all materials and labour etc. Proper completion of work.

Painting or varnishing on three coat iron work in small or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including for proper completion of Wlrk. Paint to be used should confirm

Providing and laying rectifided Glazed ceramic floor tiles of size 600x600 mm or more (thikness to be specified by the manufacturer )of 1st quality conforming to IS15622, of approved make, in all colour dedo laid with 1:4 cement and coarse sand mortar finished and jointing with white cement slurry and pigment & polising complete including supply of all materials and labour etc. Proper completion of work.Si. No. 11.40

S/F of 6mm thick tiles in flooring or dedo laid with 1:3 cement and coarse sand mortar finished and jointing with white cement slurry and pigment & polising complete including supply of all materials and labour etc. Proper completion of work.Si.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Provision for Three leyer upvc window at site including all complete (As par markete rate)

Provision for sainatory fitting with submersible pump.

15mm nominal outer dia CPVC Pipe Complete all work. (DSR-18.7.1)

25mm nominal outer dia CPVC Pipe Complete all work. (DSR-18.9.3)

P/F of 15mm dia nominal bore brass Pillar cock of approved quality(As par market rate)

P/F of 125mm nominal dia circular type with 25mm waste hole grating of approved quality and colour.DSR 18.58

Providing and placing on terrace Polyethylene water storage tank SI : 12701(DSR 18.48)

S/F of P.V.C waste pipe for W.H.B/Urinal.

Supply of 110 mm Pvc Pipe at site (As par market)

Construction of granular sub-base by providing Well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Smooth wheel roller to achieve the desired density, complete as per technical clause 401

Providing and laying of interlocking cement concrete pavement of grade M-30 having thickness 80mm and including 25mm local sand cushion below interlocking block as per drawings and technical specification clause 1504.

P/F ISI marked 25mm thick flush door shutters conforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3Ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked nickle plated bright finished M.S piano hinges with necessary screws. As per SOR- 9.21.3

Provision for kitchen sink at site .(As par M/R)

Provision for wash besin at site .Aspar M/R

Wiring point for light in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 131 ©

Wiring point for Fan/ Fresh air Fan in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 140 C

Supplying and fixing two module stepped type electronic fan reg ulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing of Power pluge . Dsr No 1.12

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth DSR No 1.14.1

Supply & fixing of LED tubelight with batten suitable for up to 1x22 Watt LED tubelight fitting including tube on surface complete in all respects. CAT-AAA

Supply and fixing of L E D bulb at site MR (Only for estimating perpose)

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. DSR NO 2.4.1

Supply and fixing of L E D bulb at site MR (Only for estimating perpose)

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Provision for Approved Qutty A/C 2 Ton With steblizer Complete al work (As par market rate)

Provision for Approved Qutty R.O. Complete al work (As par market rate)

Provision for Approved Qullty inwerter battry with soler panel at site. As par market.

Provision for fire fighting at site( As par mr)

Provision of Sign Board/Information stone

Please Enable Macros to View BoQ information