COMPREHENSIVE MAINT OF OFFRS MD ACCN AT FATEHGARH

Amount

M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition complete all as specified and directed.

M&L for brick work (except brick) with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition complete all as specified and directed.

M & L for vitrified ceramic light shade tiles 8-10mm thick polished area of each tile not exc.0 .36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over 15mm thick screed bed of cm 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed in CM 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) incl dismantling of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement and applying two coats of Oil Bound Distemper over 1mm thick wall care putty complete all as specified and directed

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement and applying two coats of cement based paint over alkali resistant primer complete all as specified and directed

M & L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to match with the existing surfaces as before complete all as specified and directed.

-Diitto- all as per item ser No-12 above but exc 1.50sqm but n.exc 4Sqm

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD no LZ/C-TD/130 Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar complete all as specified and shown on TD no LZ/C-TD/130 Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Ditto all as per item No.15 above here-in-before but as in ventilator fixed type (partly glazed and gauzed) complete all as specified

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comparing of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm double Rebated ,made from wpc material comparing of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Prelaminated both side wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of 100mm size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy. anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F stainles steel butt hinges of size 100mm medium weight.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent.

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos minimum) etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated moulded wall lining for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 6mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced.

S&F Aluminium anodised barrel tower bolts of extruded section of 100mm size etc complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint complete all as specified and as directed.

S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repair utencil plate rack 1 mm th of size 90 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete in all respect

S&F in repairs PVC acrylic toilet cabinet with shelves 440mm x 325mm x 120mm size with shutter and mirror complete all as specified and directed.

S&F in repair CP grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S & F 500 litre rotational moulded double layer ISI Marked polyethlene water storage tanks (cylindrical vertical with closed threaded top) and hoisted and fixed in position incl 20 mm PTMT valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) incl dismantling of tank complete all as specified in SSR Part I complete all as specified and directed.

S & F 1000 litre rotational moulded double layer ISI Marked polyethlene water storage tanks (cylindrical vertical with closed threaded top) and hoisted and fixed in position incl 20 mm PTMT valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) incl dismantling of tank complete all as specified in SSR Part I complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts and fixtures incl white seat cover etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan two piece wall hung type complete with cover white including fixing bolts and fixtures etc complete all as specified and directed.

S&F in repair Vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.

S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm Pillar taps, fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125mm size with shower arm complete all as specified an directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repair PVC ( SWR pipe ) 110 mm bore rain water pipe including removing old pipe and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed.

S&F in repair PVC (SWR) bends of radius 110 mm complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity n exc 500 ltr and from mouths of circulating pipes complete all as specified and directed.

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 25 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs basin mixer 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

Supply & Fixing in repair 32/40 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed.

Dismantling of asbestos cement sheets of any description (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position all as specified and directed.

M&L Rolled mild steel Fe-410-W(Gde-E-250) quality-A in rolled sections as in main and cross beams, hip, water tank where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed.

S&F for Expanded metal in available size weight not exc. 4.00 kg per sqm , cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

S&F in repairs CP brass towel rail complete all as specified and directed

M/S SRI JAGDAMBE TRADERS (BID ID -3444911)