Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.5 LAccepted-AOC UPPER BAGDOGRA PO BAGDOGRA DIST DARJEELING PIN 734014 WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹50.3 L+₹1.4 L (2.85%)Rejected-Finance 10 UDAY SHANKAR SARANI SEVOKE ROAD SILIGURI DIST DARJEELING WB PIN 734 001 | JALPAIGURI | WEST BENGAL | 734001 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹50.4 L+₹1.4 L (2.93%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹50.8 L+₹1.8 L (3.78%)Rejected-Finance KALPANA VILLA DESHBANDHU PARA BABU PARA EXTN SILIGURI 734004 | JALPAIGURI | WEST BENGAL | 734004 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹51.0 L+₹2.1 L (4.24%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military Station PO-Bengdubi, Dist-Darjeeling, Pin 734424
PETTY REPAIR TO MD ACCN AND CERTAIN LOCATION UNDER AGE B R II OF GE BENGDUBI MIL STN
2022_MES_545620_1
8378/E8
Open Tender
Civil Works
Item Rate
270 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹90,000
Yes
17 Sept 2022
16 Aug 2022
8 Sept 2022
16 Aug 2022
6 Sept 2022
1 Sept 2022
17 Aug 2022 - 22 Aug 2022
Amount
SCHEDULE 'A'
Note for serial item No 1 to 173: - (i) The contractor or his rep to report at complaint cell/office of AGE B/R -II in the morning by 9:00 Hrs to receive day to day complaints with tradesmenalongwith material & T&P:- carpenter 2 Nos, Plumber- 2 Nos, Masion-1 , helper - 5 Nos, Safai wala-3 Nos. (ii) Complaint should be attend/completed within 48 Hrs after receiving complaint slip failing which a panel recovery @ double the quoted rate of each complaint will recover from contractor dues or become dues(i.e. RAR/FB) (iii) Debris materials obtain from demolition/dismantling shall be removed from the site, outside Md land, Failing which a panel recovery from contractor Rs 500.00 per cum will be recovered from contractor dues or become dues(i.e. RAR/FB). (iv) The unit rates quoted by contractor in BOQ shall be deemed to include for above provision and no extra claim will be entertained by the Department at late date in this respect.
Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items of BoQ/Sch 'A').
Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engineer-In-Charge. (Note: Any items required to be replaced shall be paid under respective items of BoQ/Sch 'A'.)
Taking down plaster, plaster work for patches, tiling work, filling of cement morter in holes, joints , joinery (wooden/steel) iron/aluminium, pelmet box, etc requiring mashonary work and carrying out minor repairs such as patches plaster, tiles, brick, filling etc. including petty repairs material like cement, sand, aggregate, tiles etc. to make it functional complete all as specified and directed by Engineer-In-Charge. (Note: Any items required to be replaced shall be paid under respective items of BoQ/Sch 'A')
S&F in repairs stainless steel decorative curtain rod of 25 mm bore complete all as specified and as directed
S&F in repairs stainless steel decorative curtain brakets and end cap complete all as specified and as directed
Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed
S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.
Ditto all as per item no. 7.00 here-in-before but fixing only
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
S&F Prepainted galvatume aluminum zinc coating GI based trapezoidal profiled steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Prepainted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges/ valley gutters, fixed with self tapping screws complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 square metre each and not exc 2 Sqm complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 square metre each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 sqm and not exceeding 4.0 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.
Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, also including disposing off the retrieved debris outsite the premises, complete all as specified and as directed.
S&F Factory made 25mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides icluding provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter, complete all as specified and directed.
S&F factory made, 35 mm thick 2nd class hard wood (sal/hollock), plain framed, flush shutters with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and directed.
S&F (in repair) 18/19 mm thick prelaminated particle boards bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20 x 6mm thick teak wood beading complete all as specified and directed.
S&F 18/19mm thick plywood grade A (Termite treated / water proof) ,type BB fixed with screws to timber /iron frame work. (Make:Green Ply/Kit ply ) complete including fixing of pvc beads on exposed faces complete all as specifiedand directed.
M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified.
S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed
Taking down chowkat or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on Page No. 150 MES SSR-2004 Part II and complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on Page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on Page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and directed by Engineer-In-Charge.but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlyin the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed
S&F aluminum handles cast type, anodised, 150mm size complete all as specified and directed.
S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed.
S&F mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel door frame if required complete all as specified and directed.
S&F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed.
S&F MS helical door spring 150 mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.
S&F mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden door frame if required complete all as specified and directed.
S&F (in repairs) of 150 mm long aluminium handles complete all as specified and directed.
S&F (in repair) 200 mm long aluminium barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.
S&F (in repair) MS helical door spring 150 mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.
S&F (in repair) mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden door frame if required complete all as specified and directed.
S&F (in repair) mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel/wooden door frame if required complete all as specified and directed.
M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410 or Fe-250 complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as as in steel/wooden/Aluminium window/ doors all as specified and directed.
S&F (in repair) sainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as as in steel/wooden/Aluminium window/ doors all as specified and directed.
S&F 2nd class soft wood not exc 3.00 sqcm beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc complete all as specified and directed.
S&F (in repair) Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-In-Charge.
M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed.
S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed.
S&F of 4mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F (in repair) for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed.
S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.
S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and directed.
S&F in repairs PVC kit for PVC valveless action type flushing cistern low level of 10 Ltr capacity, suitable for both Indian Type Water Closet & Europeon Type Water Closet etc complete all as specified and directed.
S&F in repair sinks made of stainless steel 0.80mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.
S&F (in repair) pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and directed.
S&F (in repair) stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.
S&F (in repair) PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F(in repair) waste fittings brass chromium plated for glazed ware sink, basins, etc with long screwed shank and fly nuts, flenges end bedded in red lead cement and other end fixed 32 mm dia complete all as specified and directed.
S&F in repairs stainless steel grating doom 100 mm square/round complete all as specified and directed.
S&F (in repair) 32/40 mm dia PVC waste pipe for WHB/sink/urinal pot complete all as specified and directed.
S&F (in repair) flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.
Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15/20 mm complete all as specified and directed.
M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed.
Fixing only Steel water tubing 15 mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm complete all as specified and directed.
Fixing only Steel water tubing 20 mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Supplying and fixing of CPVC pipes of 16mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling partialy concealed / partialy surface including all fittings complete all as specified.
Supplying and fixing of CPVC pipes of 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling partialy concealed / partialy surface including all fittings complete all as specified.
M&L for repair to rolling shutter/gate including necessary gressing, welding, locking arrangement, spring complete as to bring in service condition (With out taking off shutter) complete all as specified and directed.
M&L for PVC floor trap with dia of outlet 75 mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and directed.
Cleaning of blocked WC trap and CI pipe up to 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50 m any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required of internal dia of pipe 50/75/100 mm complete all as specified and directed.
M&L 110 mm bore PVC soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed.
Ditto all as per item no. 69.00 here-in-before but except pipe, any type.
S&F PVC soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75mm dia, complete all as specified and directed.
Ditto all as per item no. 71.00 here-in-before but except pipe, any type.
M&L 50 mm bore PVC soil, sand cast, waste and vent pipes in any length with or without ears, fixed to wall, complete all as specified and directed.
Ditto all as per item no. 73.00 here-in-before but except pipe, any type.
S&F PVC bends (any radius) with for 75mm bore fitted with oval access doors complete all as specified and directed.
S&F PVC bends (any radius), diminishing pieces or tapers (larger bore measured) for 110mm bore fitted with oval access doors complete all as specified and directed.
S&F PVC branch pieces, single (equal of unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 110mm bore fitted oval access door complete all as specified and directed.
S&F PVC cowl suitable for pipes of 110mm bore complete all as specified and directed.
S&F PVC cowl suitable for pipes of 75mm bore complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore / 75mm bore pipe complete all as specified and directed.
S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified and directed.
S&F in repairs coloured Vitreous China, pedestal pattern /Anglo-Indian Type white (excluding flushing cistern & flush pipe) incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed.
S&F (in repair) plastic water closet seat, white, closed pattern for pedestal pattern wc/ anglo indian wc with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F (in repair) bib Tap of PTMT (Make-Prayag) any colour 15mm dia complete all as specified and directed.
S&F (in repair) stop valve of PTMT (Make-Prayag) any colour screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning ete and hoisting if requeired reconnecting and refixing in position of capacity execeeding 250 ltrs and not exceeding 500 litres and removing to stores complete all as specified and directed.
S&F (in repair)s rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories ccomplete all as specified and directed.
Supply and fixing (in repair) ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed.
Supply and fixing (in repair) ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed.
Supply and fixing (in repair) stop valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed.
Supply and fixing (in repair) (concealed type) stop valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed.
S&F as (in repair) bib taps 15 mm bore chromium plated complete all as specified and directed.
S&F bib cock 15 mm bore long body chromium plated (in repair) complete all as specified and directed.
S&F as (in repair) swivel shower of brass chromium plated with long head for fixing with 15 mm pipe complete all as specified and directed.
S&F in repair wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wal flange of 15mm bore etc complete all as specified and directed.
S&F in repair wall mixture with provision for hand shower for 15mm bore pipe complete all as specified and directed.
Making functional old wall mixture / wash hand mixture by providing 115mm long bend pipe on upper side, connecting legs and wall flange etc / any material required to make it functional complete including making good tiles etc if broken all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.
Closing bolt holes, etc., in old corrugated steel sheets or Aluminium sheeting/AC sheets/ prepainted sheets by sealing with suitable material to stop leakage upto complete satisfaction of JE incharge.
Repair of steel windows/wooden/aluminium windows and easing windows shutter by using oil,greesing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth to openable in a normal process.including cutting /welding required for steel window, or any cutting required for aluminium windows complete all as specifiesd and directed.
Repair of aluminium doors shutters by making it functional after carrying minor repairs and make it good and smooth to openable in a normal process including any minor material require Complete all as specifiesd and directed.
M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L for rendering 5mm thick on concrete surfaces of ceiling of chajja etc in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed
M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound including taking down of cement plaster on bricks walls hacking for key & scrubbing down with water complete all as specified and directed. (Note ;- WPC shall be measured and paid separately).
Supply only water proofing compound (Liquid) complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed.
M&L for providing RCC M-20 (Nominal mix) (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No.111.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.
M&L plain cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC/ sub base etc complete all as specified and directed.
Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt beyond the MOD premises etc complete all as specified and directed
M&L Providing 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement as in sunken floor treatment etc complete all as specified and directed. (Note : WPC shall measured and paid saperately under respective item of BoQ/ Sch 'A')
M&L for applying and evently bituminous tack coat @ 1.20 Kg/Sqm of industerial bitumen blinded with 0.006 cum of course sand per sqm on the surfaces of sunken floor complete all as specified and directed.
M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying 3mm thick APP modified water proofing polymeric membrane reinforced with non woven polyester fibre using butane torch by torch application with 10cm side lap and 15cm end lap.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for providing 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregrate) as in flooring, plinth protection Finishing cement concrete surface even and smooth Without using extra cement complete all as specified and directed.
M&L for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in surface channels and drains complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for (300mm x 450mm) x 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete including rendering 1 :4 CM as in backing coat all as specified and directed.
M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in 1:6 CM complete all as specified and directed.
M&L for non-skid ceramic tiles to 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in 1:6 CM the surface complete all as specified and directed.
M&L for PCC 75 mm thick type D-2 ,1:4:8 ,using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash brick straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
Ditto all as per item no. 130.00 here-in-before but except bricks.
M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.
M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and directed.
M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc complete all as specified and directed.
M&L preparing new surfaces of walls for applying two coats of oil emulsion distemoer (oil bound distemper) of any tint complete all as specified and directed.
M&L for applying one coat of oil emulsion distemoer (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered/unplastered surfaces by washing/rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface/nail holes with white cement/POP/wall putty complete all as specified and directed.
M&L for preparing Old plastered surface of wall and applying One coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete as specified and directed.
M&L for applying one coat of white wash on old decorated plastered surfaces of ceiling after preparation of surfaces complete all as specified and directed.
M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for applying one coat of colour washing (Lime wash white) on walls surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down,scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed.
M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.
S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.
S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.
M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed
S&F in repair steel window with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded including taking down of old unserviceable window.
Ditto all as per item no. 146.00 here-in-before but without glazing bars.
S&F in repair steel ventilator with top hung shutter including hinges steel peg stay complete.
M&L for providing cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed.
M&L for applying two coat of painting on new steel surfaces complete all as specified and directed by Engineer-In-Charge.
S&F 0.5mm thick stainless steel plate rack of overall size 24x 36 x 10 inch of standard quality and shapes CAT No P-336 of Make- Prayag or equivalent completed all specified and as directed.
S&F in reapair aluminum door closer (aluminum extruded section) hydraullically regulated, designation No 3, universal type, suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg complete all as specified and directed.
S&Fin repair stainless steel soap dish complete all as specified and directed.
S&F in repair stainless steel shelf 450mm long etc complete all as specified and directed.
S&F in repair PVC shelf 450mm long etc complete all as specified and directed.
S&F in repair hand shower (Health Faucet) ABS Body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as specifed and directed.
M&L for preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed.
S&F continous (piano) hinges width of flaps (when open) 30mm ,mild steel bright finish or electrogalvanised complete all as specified and directed.
S&F stain less steel catcher of superior qualityall as specified and directed.
S&F 50mm stain less steel pivoted type hinges of superior quality and directed.
S&F 75mm long aluminium alloy handles, fabricated type, anodised (ISI Marked) all as directed by Engg-in-charge.
S&F aluminium 65mm mortice lock four levers (ISI Marked) all as directed.
S&F aluminium anodised barrel tower bolts of extruded section with 75mm long bolt (ISI Marked) complete all as specified.
S&F in repairs Drawer side channel of std size and incl of rooler for moving drawer,mild steel bright finish,or electrogalavanised width of flap 30mm & Length 60 mm all as specified.
S&F in repairs stainless steel fancy type, bright finish handles fixed with screw,of 125mm size all as specified.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets, and existing frame work also, complete all as specified and directed.
Taking down wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets, from existing frame work of steel / wooden and refixing after cleaning roof ,and making good if any damage cause to celing without any extra cost complete all as specified and directed.
M&L for Non asbestos designer fibre cement building boards of size 600mmX600mmX4 mm thick, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help of J Hook and 4 mm GI wire of required size to maintain the proper levels etc. The GI frame work is supported on side wall with the use of GI L section of size 25mmX25mm angle complete all as specified and as directed
S&F Decorated PVC False ceiling of size 600mmX600mmX5 mm thick, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm in square pattern of grid size 600mmX600mm. The GI frame work is supported from the ceiling with the help of J Hook and 4 mm GI wire of required size to maintain the proper levels etc. The GI frame work is supported on side wall with the use of GI L section of size 25mmX25mm angle complete all as specified and as directed
Dismentling of old Delinators of any size and refixing it in same other postion including providing pcc in 1 :2: 4 type B 2 of size 30cmx 30cm x 30cm including all excavation if required all as directed.
Dismentling of old cateyes/ solar studs of any size and refixing it in same other postion including providing bolts / pvc solvent for fixing all as specified and directed.
M&L for cleaning/removal of roof/ wall vegitations or any other unwanted things by using brushing or mannual neat and clean surface all as directed.
S&F (in repair) plastic water closet seat, white, closed pattern for pedestal pattern wc/anglo Indian wc with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed..
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 2,26,070.00 (refer Tender Srl Page No 49). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
Paritosh Saha
UNIVERSAL CONSTRUCTION
M/S DUTTA CONSTRUCTION CO
Amulya ky roy
M/S KAR CONSTRUCTION
M/S P. RAI CHOUDHURY AND CO.
M/S G D CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .