Construction of Smashanbhumi at Km 84/740 on Panvel-Mahad-Panji Road No.66 under CPR Fund of Rehabilitation and upgradation And NH-66 (Erstwhile NH-17) form km 84/000 to 205/400 (Indapur to Parshuram Ghat Section) to four lane with paved shoulder in

Amount

Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete(Material obtained from departmental Land) (Item No. 2.27)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means (Item No. 21.02)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding/ steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Item No. 24.04)

Providing random rubble masonry first sort of trap/ granite/quartzite/ gneiss/jamba stones in cement mortar 1:6 in external walls of plinth including bailing out water manually, racking out joints when pointing is to be done and striking joints from inside including watering etc. complete. (Item No. 28.07)

Providing brick masonry with interlock "Fourlock" bricks in retaining walls, diaphragm wall, compound wall, plinth & partition wall etc of specified 100mm thick including construction with interlock "Fourlock" brick, filling the hollow spaces with cementious grout material of proportion of C:M 1:6 using trap stone grit metal/ artificial sand dusting off the finished brick masonry "Fourlock" bricks, surface, watering & curing etc complete.(Including steel reinforcement of 8mm bar as strengthening bar in hollow spaces of fourlock bricks with cementious greet material) (Item No. 51.121)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05)

Providing and laying cement concrete flooring 40mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc finishing smooth(with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade (Item No. 33.09)

Providing internal cement plaster 12mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. (Item No. 51.106)

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick(24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram/ sq.m.). (Item No. 38.04)

Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35mm thick as per detailed drawing consisting panelled vertical styles 100mm x 35mm and lock and bottom rail 200mm x 35mm and panels 12mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. (Item No. 39.07)

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (Item No. 40.02)

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.number: As directed by Engineer-in-charge. (Item No. 23.09)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. (Item No. 23.11)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/c oncrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Item No. 25.15)

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granularmaterial) (Item No. 12.70)

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. (Item No. 14.01)

Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60mm thickness of having a strength of 300 Kilogram/ Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30mm thick including skirting joints and cleaning etc. complete. (Item No. 33.49)

Construction Material Testing and Royalty charges

RASIKA R DHUMAL

Bidder Name

Pankaj Hanumant Thakur