Lighting for parks playgrounds and jogging tracks within JMC limits

SITC of outdoor post top luminaire of 60 Watt IP67 mounted in suspension type having an approximate size of 460mm outer diameter and 635mm height, housing - aluminium with designer steel aesthetic crown, optical grade opal injection moulded/clear polycarbonate diffuser and graphite grey UV resistant colour,constant current electronic, driver provided with high voltage ,open & short circuit protection and ambient temperature -10C to +40C. Supply 150V- 240V power factor 0.95 ,THD ≤ 20% internal surge protection of 4KV with following specification of light Engine for 60W : 4800Lumens, CCT 3000K ±500 CCT ,CRI 70 and lumen maintenance of L70 at 50000 hours IP 65 connectors,Accessories etc

SITC of LED decorative drop down light made of aluminium housing fitted with Polycarbonate diffuser. MF MVF 50 7 A,60 W,size 500mm(with Philips/Fulham/HR Driver)

Supplying, Instalaltion, Testing & Commissioning of 1.1 grade, 3x1.5sqmm FRLS PVC insulated flexible copper conductor, Single core cable in the existing surface/recessed steel/ PVC Conduit as required.

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx4Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx6 Sqmm Al. Armoured XLPE Sheathed cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning of 1.1 grade, 4Cx10 Sqmm Al. Armoured XLPE Sheathed stranded cable including termination (along with lugs)

Supply, Installation, Testing & Commissioning 4Cx16 sqmm 1.1KV, Stranded Aluminium conductor,XLPE insulated, PVC Sheathed, armoured extruted PVC type grade as per IS 7098 (part I)1998 with upto date.

Supply, Installation, Testing & Commissioning of 4Cx4/6/10sqmm end termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed/XLPE aluminium conductor cable 1.1KV grade as required.

Provide & fixing of Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required

Providinng and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing

Supply & Fixing of 32mm dia medium class PVC conduit anlog with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

1 phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 04 No 32 Amps SP MCBs for Service Connections,1no.digital Timer & 1no.32 amp Contactor, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accessories 4 way Distribution Service Pillar. Support Galvanised angle frame and legs (40mm x 40 mm x 3mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx [email protected] per mtr Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.Cement grouting for support angle legs .Complete Job

Supplying installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars /Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status, I/c programming at site complete as required.01 output per phase and suitable for single phase supply. (as per the direction of Engineer Incharge)

Supply, Installation, Testing & Commissioning 35 mm² AB (HT) Cable (3x35+1x70 mm²) XLPE(11 kV, 3C + Earth) 1.1KV, Soild Aluminium conductor,XLPE insulated, PVC Sheathed, armoured extruted PVC type grade as per IS 7098 (part I)1998 with upto date amendments, including supplying and making straight through joint wkith heat shrinkable kit includind ferrules/lugs and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 grade as required.3x 35 Sqmm & 4x 16 Sqmm

Supply, Installation, Testing & Commissioning of 5 mtr height Decorative pole made of galavnised mild steel pipe duly polyurethane (PU) paint coated with 1 mtr. long single arm designer bracket is made of round tube conforming to IS 1161. The pole(OD of 114.3mm and thickness-3.6mm) with bracket is given pre-treatment and finished with PU paint giving it a pleasing appearance and antique finish. Pole shall be available to hot dip galvanize the tube before painting. Foundation bolt size shall be 20x600x4nos. with Base plate size 250x250x12mm. A door is provided with Electrical accessories (connector, bakelite sheet and 6 Amp single pole MCB, cable looping termional for 4x4/6sqmm copper cable). Aluminium casting in golden ring form at bottom, middle, top of the pole. The pole will be supplied with brackets and luminaire combinations to suit the requirement. Branding name shall be embossed at the bottom near Junction/MCB box. Sticker not allowed in the form of company branding. Complete with all repects

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. @ 120KG/CUM

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto

Structural steel work in bullt up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.10.2.2 Welded

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 4 fine sand)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete asrequired. 63 mm dia (OD-63 mm & ID-51 mm nominal)