Shifting of 11 KV line Hardibazar Town feeder of M/s CSPDCL along with 2 transformer at malgaon village at mine boundary of Dipka Expansion Project.

Amount

Shifting of 11 KV line at Malgaon at mine boundary of Dipka Expansion Project.

Material Part (A)

MS H beams 152 x 152 mm, 37.1 KG/ mtr 11 mtr.

11 KV 8 feet centre DC cross arm

11 KV 45 KN Disc insulator T&C Type (polymer)

11 KV strain hardware fittings

11 KV 5 KN Pin insulator (polymer)

D.O/ LA mounting channel 75 x 40mm

DO fuse units 11 KV

MS Angle 50x50x5 mm

Stay set without stay wire 16mm Paint 11 KV

Stay wires: 7/3, 0.05mm (7/10 SWG)

Stay clamp for H beam

Concrete 1:3:6 Ratio

MS Angle 50x50x5 mm

Transformer Mounting 100 x 50 mm channel

Danger boards 33 KV & 11 KV

Pipe GI 40 mm Medium quality

GI wires: 4 mm (8 SWG)

GI wires: Barbed wire

Red Oxide Paint

Aluminium Paint

Lightning Arrestors 11 KV gapless type

MS nuts and bolts: 16 x 40 mm

MS nuts and bolts: 16 x 65 mm

MS nuts and bolts: 16 x 140 mm

MS nuts and bolts: 16 x 200 mm

TPN switches, 415 Volts : 63 Amps

Aluminium 1C, 150 Sq mm Unarmoured LT PVC cable

Distribution Box for MSEB Type 100 KVA

Aluminium 1 C 70 Sq mm Unarmoured LT Pvc

Labour Part (B)

Service in lieu of earthing coal & salt

Labour SCH for A-1 (11779.75 +17114.79)

Labour charges for concreting

Other Charges (C)

Incidental Charges

Overhead Charges

Transportation Charges

Shifting of 11 KV line at Malgaon at mine boundary of Dipka Expansion Project.

Material Part (A)

PCC pole 200 KG 9 Mtr Long

RCC Block (with 6 mm MS Bar)

I bolt M 20 x 128 mm Thread Portion 50 mm

MS nuts and bolts: 16 x 160 mm

MS nuts and bolts: 16 x 90 mm

Binding wire

Danger boards 33 KV & 11 KV

GI wires: Barbed wire

Aluminium Paint

Red Oxide Paint

Jointing sleeve for Racoon Conductor

ACSR conductor 0.05 sq mm (50 sqmm AL q)

11 KV 5 KN Pin insulator (polymer)

Earthing Copil 8 SWG GI wire 50 mm Dia 450M

11 KV top clamp

11 KV V cross Arm

11 KV cut point channel paint

11 KV strain hardware fittings

11 KV 45 KN Disc Insulator T&C type (Polymer)

Labour Part (B)

Backfilling of Pole Pit with Boulders @ .25

Labour SCH for D6 (4) as per DL-9

Other Charges (C)

Incidental Charges

Overhead Charges

Transportation Charges

Shifting of 11 KV line at Malgaon at mine boundary of Dipka Expansion Project.

Material Part (A)

Cable Tie for AB cable (UV Protected Black)

END clamp cap for 50/70 sq mm

Straight through Joint

Aluminium 1C 16 sqmm Unarmoured LT PVC cable

Service ring made of 16 mm

Aluminium Paint

Red Oxide Paint

Stainless steel strap with Buckle

Distribution Box 3 ph 4 connector

Earthing coil 8 SWG GI wire 50 mm dia 450 M

MS Nuts and Bolts : 16 x 65 mm

MS nuts and Bolts : 16 x 40 mm

Bolt with Nut MS 12 x 100mm

RCC Block (with 6 mm MS bar)

1.1KV LT AB cable 3 x 50 + 1 x 16 + 1 x 35 sq mm

Anchor clamp/ dead end clamp

UDC - Universal Distribution connector

Insulating piercing connector for ABC to

Insulating piercing connector for AB Cable

Insulating piercing connector for AB Cable (S

Suspension Clamp

PCC Pole 140 KLG 8 Mtr Long

GI wires : Barbed wire

Labour Part (B)

Labour SCH for D6 (4) as per DL-9

Back filling of pole pit with Boulder @ 0.25

Other Charges (C)

Incidental Charges

Overhead Charges

Transportation Charges

Less Scrap Deduction

Important & Necessary Note: 1). The work has to be executed as per standards/norms laid out by CSPDCL. 2). The materials to be used in the execution of work is to be procured from the registered vendor of CSPDCL and should be as per BIS. 3). The liasoning with CSPDCL has to be done by the contractor during exeuction of work.

Total impact of GST for the purpose of CTC

AARNA Constructions (BID ID -1125803)