DESIGN AND CONSTRUCTION OF PROVN OF OFFICERS JCOs and ORs DEFI MD ACCN AT JALIPA MIL STATION

Amount

SCHEDULE 'A' PART-I - BUILDINGS & STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Design & Construction of Double storeyed Officers MD Accn (G+1) (Major & Above) Block of 04 Qtrs including garrage as per architectural drawing and as per GRIHA norms but excluding all internal services and external services complete as detailed in scope of work and other documents of tender,+B14:B32 complete all as specified and directed . (Total 08 Qtrs)

Design & Construction of Double storeyed JCOs MD Accn (G+1) Block of 04 Qtrs including garrage as per architectural drawing and as per GRIHA norms but excluding all internal services and external services complete as detailed in scope of work and other documents of tender, complete all as specified and directed . (Total 20 Qtrs)

Design & Construction of Double storeyed ORs MD Accn (G+1) - Block of 08 Qtrs including garrage & Scooter shed as per architectural drawing and as per GRIHA norms but excluding all internal services and external services complete as detailed in scope of work and other documents of tender, complete all as specified and directed . (Total 64 Qtrs)

Design & Construction of Pump House (Single storeyed) as per architectural drawing and as per GRIHA norms but excluding all internal services and external services complete as detailed in scope of work and other documents of tender, complete all as specified and directed .

Design & Construction of UG Sump Capacity 150000 Ltr capacity complete as detailed in scope of work and other documents of tender complete all as specified and directed :-

Design & Construction of Garbage Bin complete as detailed in scope of work and other documents of tender complete all as specified and directed :-

NOTE: Schedule ‘A’ Part II to XI items which are Prepriced by MES, Bidders shall insert their lump sum amount in the Green coloured field under Col-6 only.

Lump Sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 58(R)

Lump Sum price worked out by the contractor for "ROAD , PATH & CULVERT" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 63(R)

Lump Sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 65(R)

Lump Sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.66(R)

Lump Sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 69(R)

Lump Sum price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 76(R)

Lump Sum price worked out by the contractor for "FENCING & GATES" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 78(R)

Lump Sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 79(R)

Lump Sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 86(R)

Sch 'A' PART-XI (MISCELLANEOUS B&R AND E&M WORKS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

EXTERNAL WATER SUPPLY Supply, Lay and testing 100mm (4'') bore dia ductile iron pipe, spigot & socketed, ISI marked, class "K-9'', with internal cement mortar lining including nuts and bolts and all fittings including rubber gasket (tighten joint), laid in trenches, complete all as specified and directed.

Supply, Lay and testing 100mm (4'') bore dia ductile iron pipe, spigot & socketed, ISI marked, class "K-7'', with internal cement mortar lining including nuts and bolts all fittings including rubber gasket (tighten joint), laid in trenches, complete all as specified and directed.

M & L Ductile iron specials of any size & any type for spigot socketed pipes such as bends (any type, radius and angle), tapers, any type (straight bend, increasing, decreasing or double socket etc) Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs adopters etc of any size radius and lengh confirming IS specifications, for pipe upto 200mm bore dia complete all as specified and directed.

Supply, fixing, testing and commissioning of Centrifugal monoblock Pumping set horizontal foot mounted induction motor electric motor driven 3 Phase, 415 Volts, 50 Hz AC supply, discharge not less than 1150 LPM ± 10% at head not less than 30 Mtr , insulation class 'F' , degree protection IP-55 , ambient temperature of 50% C confirming to IS-12615- 2011, IEC- 60034-30-2008, and other necessary accessories including suitable stater and electrical connection with suitable size copper cable including necesssary foundation as per manufacturer's recommendation complete all as specified and directed.

Supply and fix 80mm (3'') bore dia Foot Valve conforming to IS-4038 complete all as specified and as directed.

Supply, install, commission and testing cubical type LT panel board Outdoor type, manufactured by a CPRI approval manufacturer, floor mounted, dust & vermin proof, front and rear operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 3.00mm thick duly painted with two coate of powder coated paint of approved shade after seven tank treatment process both internally ans externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 phases 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with sutiable size of PVC insulated copper conductor, thimbles glands complete all specified and directed with the following accessories :-

INCOMING (a) MCCB 4 POLE, 415 Volts, 200 Amps, 25 KA - 01 No. OUTGOING (a) MCCB 4 pole, 415 Volts, 100 Amps, 16 KA - 02 Nos (b) Fully automatic star delta staters suitable for 15 HP motors - 02 Nos (c) MCB SPN, 220 volts, 16 Amps, 10 KA - 02 Nos (Spare -01 Nos) (d) Change over switch front operated 4 pole, 415 Volts, 63 Amps - 01 No (e) Digital VAF mater for basic electric system monitoring - 01 Nos (f) Indicator lampe (RYB) (set to three) - 03 Set

Supply and fix 50mm (2'') bore dia cast iron air release valves with two air outlets (double action) conforming to IS-14845 of size and fixing up to cast iron water supply mains of size 100mm dia complete all as specified and as directed

Supply, install, testing and commissioning of chlorination dosing system consists of the following :- Multi cavity water sanitizer / conditioning station with proportional dosing arrangement at zero discharge of the the power free automatic system, 100 Ltrs tank, cavities are complete with lids attachments are water inlet valve, Overflow valve (rubber guard included), outlet valve for stand along gravity flow, drain valve, level controller, level gauge, detachable grouting base with rubber bufferne, chlorine tablets contained in plastic cylinder sealed disposable sanitizer refill (set of 25 pcs, stequa 411 AE refill as per declibac Technologies) for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through for following recommended dosing system (a) Replacement indication -visual & weight variation (b) Water contact orifice design-sealed, whe dry, exposed upon immersion. (c) Operation type - Non contact, non inhalatory (d) Cylinder dia 2.5 Inches +/- 0.5 inches (e) Cylinder height - Minimum 10 Inches +/- 0.5 Inches. Make - Declibac Technologies or equivalent as given in List of makes.

M & L for Construction of PCC Block Masonary valve chamber of size 900 x 900 x 900mm (Internal dimenssions) with PCC foundation 1:4:8 type D-2 using 40mm graded stone aggregate 150mm thick, 15 mm wide off sets alround over 100mm thick hard core , one brick thick walls built in CM 1:4, 50 mm thick PCC 1:3:6 Type C-1 in benching & coping, finished even and smooth, rendering 10mm thick in CM (1:4) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in Soft / Loose soil 3mm thick MS sheet cover fixed on 40mm x 40mm x 6mm thick angle iron frame with hold fasts 40 x 6 mm embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

All as per Item No 19 above but size 600 x 600 x 600mm (Internal dimenssions) complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, installation, testing and commisioning of outdoor type plinth mounted step down transformer, 11 KV, 433 Voltts (at no load), Level-II, AC 3 , 50 Hz, 300 KVA capacity, core type, double copper wound, oil immersed, naturally cooled, Oil Natural Air Natural (ON AN), with external colling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYN-11 with Netural brought out on secondary side (LV side) and having tapings at + 5% to -10%in steps of 2.5% on HV side to be changed by means of hand operated off load tap chnager gear. The maximum temperature rise should not exceed 40 degree celsius in oil and 45 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 40 degree celsius. The transformer shall be of BOLTLESS core design. Transformer shall be double wound, core type with low loss, non ageing high permeability PRIME GRADE, CARGO with M-4 Grade or Better complete all as specified and as directed, comprising of the following accessories :- [a] One cable box on HT side (primary side) consisting of three nos porcelain bushing with copper roads complete with nuts and wasgers with cable glands suitable for reception/taking Out 3 core, 185 Sqmm, HT 11000 Volts grade, XLPE insulated and PVC sheathed, heavy duty, armoured cables including jointing materials complete.

[b] One cable box on LT side (Secondary side) consisting of four nos porcelain bushing with copper rods, complete with nuts and washers, with cable glands suitable for reception/suitable for connection in bus bar turking (BBT). [c] Oil conservator with filter type drain valve and oil level gauge. [d] De-hydrating breather with first fill of dehydrating agent (Silica gel). [e] Explosive vent, Thermometer pocket on tank cover, Oil level gauge, Oil drain filter valve, Lifting lugh, Oil filling hole with cap/plug with conection plant complete, airrlease vale plug and four nos plain soild cast steel detachable rollers. [f] One No 100mm dia, dial type thermometer, vap our pressure type, having range 0-120 degree clesius with metal guard having maximum perimeter temperature reading indiacator with re-setting device. [g] Two earthing terminals on tank cover to facilitate fixing of 50 x 6mm galvanised iron earth strip for earthing of body. [h] Rating plate and terminal marking plate. [j] Extra bushing for neutral, in the LT cable box for providing independent set of earthing for neutral. [k] First fill of new and unused transformer oil, IS-335 marked, filtered and tested upto 40 KV dielectric strength at 2.5mm air gap between testing electrodes [l] Providing adequate size and nos of channels, embeded in floor movement of transformed. [m] Unidirectional roller wheel. [n] Other accessories as per manufacturer design. NOTE : (i) Transformer shall be supplied inclusive of initial oil illing to appropriate level of insulation oil with desired dielectric strength. (ii) The rates quoted by the contractor shallbe deemed to be includ foundation of required size as per manufaturer's instruction.

Supply fixing an testing 45 Watt LED inverter street light luminaire with the following functions :- (a) Real time clock for aotomatic ON-OFF dimming option as 100% at 1800 hrs and then 30 % at 2300 hrs, 50% at 0400 hrs and switch off at 0600 hrs (b) In built lithinum ion battery 3.7 Volt for 1.5 to 02 hrs power back up for operation at 15 -20% of rated wattage in case of power failure with red indication for 230 Volt AC available and green blinking for battery charging and green stable for battery full charged. (c) Versatile pressure die cast alluminium alloy housing with specially designed integral cooling fins top maintainable, clear toughened glass and high efficient secondary lens with IP 66 protection and isolated compratment for driver and control gear. (d) LM 80 certified LED with 50000 burning hrs and system lumen efficiency 110 Lm/W (e) Open and short circuit protection, reverse polarity protection, high voltage cut off at 300 + 10 Volt and 5 KV internal surge protection operating voltage 140 Volt to 270 Volt and operating temperature -10 °C to 50 °C Make :- Halonix Cat part No HW SL HL SLD MLO-4-45-CWL-DIMM-RTC or requivalent make in Bajaj/Havells, Wipro/Cromptone

Supply, install, commission and testing cubical type LT panel board , outdoor canopy type, manufactured by a CPRI approved manufaturer, floor mounted, dust & vermin proof, front and rear operated door with necessary locking arrangement made of 50 x 6m MS angle iron frame work and CRCA sheet of 3.00mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase, 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands complete all as specified and directed with the following accessories :- (Main Panel Board No-01 at ORs for New MD Accn)

INCOMING: (a) MCCB 4 POLE, 415 Volts, 400 Ampe, 36 KA - 01 No OUTGOING (a) MCCB 4 POLE, 415 Volts, 200 Amps, 35 KA - 02 No (b) MCCB 4 POLE, 415 Volts, 100 Amps, 25 KA - 02 Nos (c) MCCB 4 POLE, 415 Volts, 125 Amps, 35 KA - 01 No (d) MCB TPN, 415 Volts, 32 Amps- 02 Nos (e) Time switches astro type (having longitude of Indian cities in memory 250 Volt single phase of 20 Amp rating with contactor - 01 No) (f) digital VAF meter for basic electric system monitoring - 01 No

All as per Item No 23 above here in before but with followings accessories :- (MAIN Panle Board No - 05 for NEW MD JCOs) INCOMING: (a) MCCB 4 POLE, 415 Volts, 100 Ampe, 25 KA - 01 No OUTGOING (a) MCCB 4 POLE, 415 Volts, 63 Amps, 25 KA - 02 Nos (b) MCB TPN, 415 Volts, 32 Amps- 02 Nos (c) Digital VAF meter for basic electric system monitoring - 01 No.

Supply and Fix street light junction box mistral IP-65 thermoplastic enclosures with transpararent door 4mm thick in 4 modules in single row of size 52 x 202 x 117mm with SP 0.5 Amp MCB and including clamp of size 25 x 3 mm thick of flate iron with bolt, nut etc required on mouting in steel tublar pole 8.5 Mtr long complete all as specified directed.

Supply and Fix GI pipe bracket for street light fittings made out of 32mm bore dia GI pipe light grade 1.5 Mtr long bent to required angle / shape with and including necessary clamps, nuts, bolts, & washers of suitable size all as specified and directed

FENCING & GATES S & F 75mm dia CI wheel as rollers for gates all as specified and as directed.

INTERNAL WATER SUPPLY S & F of 15 mm bore fancy type chromium plated bib cock with wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Cat Part No VGP-81037 or equivalent.

S & F of 15 mm bore fancy type chromium plated pillar cock with wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Cat Part No ORP-10001PM - 7037 or equivalent.

S & F of 15 mm bore fancy type chromium plated Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Cat Part No CON-169KNB or equivalent.

S & F of 15 mm bore fancy type chromium plated angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Queen Series Cat Part No QQT - 7053 or equivalent.

S & F of CP wall mixer 3 in 1 system with provision for hand shower and over head shower and including 1.5 m long tele shower screwed for iron pipes or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Queen Series Cat Part No QQT - 7281 or equivalent.

S & F of 15 mm bore fancy type chromium plated Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges and fixed complete all as specified and directed. Make - Jaquar Cat Part No FON-40165

S & F overhead shower 150x150mm of square shape single flow with rubit cleaning system ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar Queen Series Cat Part No OHS - 35495 or equivalent.

Supply and fix health faucit with 1200mm long flexible mild steel tube 15mm dia with wall hook and compete all as specified and directed. Make - Jaquar Queen Series Cat Part No ALD - 573 or equivalent.

S & F of 15 mm bore fancy type chromium plated bib taps with wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Essco Series or equivalent.

S & F of 15 mm bore fancy type chromium plated pillar cock with wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Essco Series or equivalent.

S &F of CP wall mixer 2 in 1 system with provision with central spout and connection for over head shower with divertor liver ISI marked complete all as specified and directed. Make - Jaquar Queen Series Cat Part No QQT - 7281 or equivalent.

S & F of Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses and fixed complete all as specified and directed. Make - Jaquar Queen Series Cat Part No QQT - 7167B or equivalent.

S & F of 15 mm bore fancy type chromium plated sink cock with swinging spout (Wall Mounted Model) with Wall Flange and fixed complete all as specified and directed. Make - Jaquar Essco Series or equivalent.

S & F of 15 mm bore fancy type chromium plated angular stop cock with wall flanged screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make - Jaquar Essco Series or equivalent.

S & F overhead shower 114x114mm of square shape single flow with rubit cleaning system ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar Essco Series or equivalent.

S&F two way bib cock with wall flange chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar Series ORP-15041PM

INTERNAL ELECTRIFICATION Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 16 KA, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed. Note: Outgoing MCBs shall be measured and paid separately

Supply and fixing TV sockets complete with all accessories all as specified and as directed.

Supply and fixing RJ 11 Gang with shutter (Telephone Jack) complete with all accessories all as specified and directed .

Supply & fix PVC metal braided connection pipes for hot water supply with brass adopters 15 mm dia and 450mm long complete all as specified and as directed.

S & F LED batten suitble for indoor application 10 Watt, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 Watt LED lamp B22 base including all electrical connections complete all as specified and as directed

Supply & fix LED lamp B-22 base 10 Watt, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed.

S & F LED batten suitble for indoor application 10 Watt, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

M & L for inverter point wiring for one light, ceiling fan and 5 Amp socket for each room with 2.5 Sqmm,PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS), 1100 Volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories upto the main DB and 15 Amps switch socket combination with gang box flushed in wall for inverter power supply complete all as specified and as directed.

S & F LED security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 4 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT 5500-6500 CRI greater than 70 , input power 30 Watt output operating voltage 140-280 Volt with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 Sqmm fixed with & including bracket made of GI pipe 40mm bore light grade, 1.6 Mtr long bent to shape required with 2No MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. MAKE: Crompton CAT PART No LST-25-CDL-M or equivalent of PHILIPS / HAVELLS / WIPRO.

M & L for drawing 12 pair /multi core coated copper telephone cable including PVC conduit of size 20mm complete all as specified & directed.

ARBORICULTURE Supply and plantation of SHISHAM TREE PLANT with saplings 90cm to 150cm height including excavation of suitable size pit (size of pit shall not less than 45 cm dia & 60 cm deep) to accommodate the roots of plants including provn of good earth and treating with farm yard manure in the ration (4:1) fertilizers and pesticides (i.e. Bevation and neem cake BHC 10% linson dust. Thimment or phorate, manures super and vermicompost) and make up the trench area to proper levels for its growth and maintaining for one year from the certified date of completion of work complete all as specified and direcetd.

All as per item No 32 above but Neem Tree plant 90cm height

All as per item No 32 above but Promgranate Tree plant 90cm height

All as per item No 32 above but Nimbu Tree plant 90cm height

All as per item No 32 above but Gulmohar Tree plant 90cm height

NOTE for Sl Item No 59 to 64. :- (i) Height of plant shall be measured from top of follage (not from the isolated branch / leaf, main stem) to 150mm from top of root. (ii) Water will not be supplied by MES for arboriculture. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants / grass till two years after certified date of completion of work. (iv). During two years after completion if any plant / grass is found dead or not of satisfactory growth, plants / grass of approved size and shape shall be provided without any extra cost to the Govt. (v). Supply and application of manure, sweet earth and pesticides, fertilizers etc up to two years after completion are deemed to be included in the quoted unit rate. (vi) In case of failure by the contractor to maintain the plants / grass as above, the same shall be carried out by the department at his Risk and Cost. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.

S & F Tree guards 60cm dia and 2.0 Mtr high, fabricated with 3 Nos FI of size 25 x 4mm and 3 Nos MS angle 25 x 25 x 4mm welded with MS welded mesh of weight not less than 4 Kg / Sqm with 02 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

SHRI GURMUKHDAS CONTRACTORS PVT. LTD. (BID ID -3254928)

DHARIWAL TRADERS PRIVATE LIMITED (BID ID -3249397)

M/s Tansingh Chouhan (BID ID -3243903)

Dasmesh Buildcon (BID ID -3249174)

FRIZO INDIA PVT LTD (BID ID -3254865)

SOOD ASSOCIATES PVT LTD (BID ID -3249221)