NIT-31

Amount

SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS. Taking down for maintenance, repair and replacement to street/ perimeter security light fittings of any type and any specifications or any accessories related to security light fittings of any descriptions, fitted/ fixed on poles, buildings or watching towers of any heights and any location, and re-fixing the same after necessary repairs/ replacement of defective parts including rectifying the same as per directions by concerned JE E/M and Engineer-In-Charge, at various locations, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of T&P, ladder or mechanical lift shall be deemed included in quoted rate. (ii) Supply of spare parts of light fittings shall be measured and paid separately under relevant items of Schedule ‘A’/ BOQ.

Supply only electronic LED driver for LED light fittings, capacity 30 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Phillips/ Surya/ C&S.

Supply only electronic LED driver for LED light fittings, capacity 45/ 50 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Phillips/ Surya/ C&S.

Supply only electronic LED driver for LED light fittings, capacity 60 Watt, 50Hz, complete all as specified and directed by Engineer-In-Charge. Make: Havells/ Crompton Greaves/ Bajaj/ Phillips/ Surya/ C&S.

PVC insulated FRLS cable with PVC insulated, unsheathed, multi-stranded copper conductor 1100 volt grade, size 1.50 Sqmm, twin core for connection from overhead line to junction box, complete all as specified and as directed by Engineer-In-charge.

S&F in replacement of LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection, including LED lamps of 45 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified. Make: Havells cat part No- Endura Pearl Neo SL45WLED757SASYTOPC/ Philips ordering code No- 910925866055 (Product Code- 871869634894900) or equivalent in Osram.

S&F in replacement of LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in surge protection device, including LED lamps of 60 Watt and connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- Endura Pearl Plus SL60WLED757SASYTOPC/ Philips ordering code No- 910925865969 (Product Code- 871869632029700)/ Wipro cat part No- LR02-671-XXX-57-G2.

S&F in replacement of Energy saving, LED, 30W, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or area lighting. also suitable to rough services/installations.connecting up with twin core twisted flexible copper conductor cable of suitable size,complete all as specified and directed by Engineer-In-Charge. Make: Havells cat part No- JETACOMPECTOFL30WLED757LTG/ or equivalent makes in Osram/Philips/Bajaj.

S&F in replacement of LED Post Top lantern 40W with, moonlight effect and efficient light distribution IP65 Rated and efficeint light distribution mounted on existing pole and making connetion, complete all as specified and directed by Engineer-In-Charge. Make: Crompton cat part No- LPTM-40-CDL/ or equivalent makes in Osram/Philips/Havells

S&F in replacement of IP65 Rated LED Bollard of 10 W with robust design and efficient light distribution including grouting (Foundation) in M-15 Nominal mix PCC type B-1 using 20mm graded crushed stone aggregate 30CMx30CMx30CM and making connetion, complete all as specified and directed by Engineer-In-Charge. Make: Crompton cat part No- LBLTW-10-WW/ or equivalent makes in Osram/Philips/Havells

S&F in replacement of IP65 Integral pole mounted decorative LED post top of capacity 25 watt with spherical shade polycarbonate diffuser, complete all as specified and directed by Engineer-In-Charge.

Taking down for maintenance, repair and replacement to existing street light timer switch of any type and any specifications or any accessories related to timer switch of any descriptions, fitted/ fixed on poles, buildings or watching towers of any heights and any location, and re-fixing the same after necessary repairs/ replacement of defective parts including rectifying the same as per directions by concerned JE E/M and Engineer-In-Charge, at various locations, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of T&P, ladder or mechanical lift shall be deemed included in quoted rate. (ii) Supply of spare parts of timer switch shall be measured and paid separately under relevant items of Schedule ‘A’/ BOQ.

Supply only Nature time switch, 230 V automatically switching ON/OFF as per seasonal changes and requirements single phase upto 5 KW capacity, complete all as specified and directed by Engineer-In-Charge. Make: Schneider/Legrand/L&T/ABB

Supply only Timer switch 3 phase with 48 hours back-up charge programmable and operated within 5 minutes of preset time of current rating 32 amps, complete all as specified and directed by Engineer-In-Charge. Make : Schneider/Legrand/L&T/ABB

Supply only Power contactor TP 415 volts, 32 amps without aux relay suitable for operating of timer switch, complete all as specified and directed by Engineer-In-Charge. Note: Schneider/Legrand/L&T/ABB

MCB, double pole, 40-63 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

MCB, single pole, 6 to 32 Amps, 240 Volts, 50 Hz, including necessary incoming and out going electric connection with suitable size of copper lugs, complete all as specified and as directed by Engineer-In-Charge.

House service bracket in repair for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape atleast 120° bends including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engineer-In-Charge.

Replacement of old cracked/ damaged, concrete poles with new pre-stressed concrete pole, 9.0 metres long, cross section 102mmx172mm at top and 102mmx279mm at bottom, class 10, including painting strips in black and white colour, 300mm thick, upto 1.50mtr height, from top of PCC coping with synthetic enamel paint after preparing the surface, complete all as specified and as directed by Engineer-In-Charge. Note: Excavation, earth work and concrete in foundation shall be measured and paid separately under respective items of BOQ.

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable complete all as specified and directed.

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 10 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable, complete all as specified and directed.

Supply, laying commissioning, testing of the XLPE LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable, complete all as specified and directed.

Replacment of switch fuse iron clad of sheet metal SP fused and neutral link of capacity 32 Amps 240 volts, complete all as specified and directed by Engineer-In-Charge. Make: Havells/Schneider/ ABB/ Legrand.

Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50mtr in depth; not exceeding 10 Sqm on plan and getting out, in any type of soil, for laying electric cables or foundation of poles etc, complete all as specified.

Excavating in trenches not exceeding 1.5 meter wide and exceeding 1.5 meter and not exceeding 3 meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in any type of soil all as specified and directed.

Returning filling in incl spreading watering and well ramming in layers in hard/dense soil each not exceeding 25cm thick complete all as specified.

Removing surplus soil to a distance not exe 50 mtr and depositing where directed at a level not exe 1.5 m above the starting point complete all as specified and directed.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness shall be measured.

Sub class ‘B’ bricks, modular size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning for mechanical protection of cable, with width equal to the length of the brick, complete all as specified and directed by Engineer-In-Charge.

Plain cement concrete 1:4:8 type D2 using 40mm graded granite stone aggregate for foundation of poles all as specified and as directed.

Plain cement concrete 1:2:4 type B1 using 20mm graded aggregate for coping to pole foundation including necessary form work with fair finished surface , complete all as specified and directed by Engineer-In-Charge.

Replacement of old unserviceable/ damaged GI pipe with new GI pipes/ Tubes, 'light grade', galvanised, 40mm bore, ISI marked, laid in trenches or fixed to walls/ poles including mild steel clamps, nuts, bolts and washers; for protection of electric cable, complete all as specified and as directed by Engineer-In-Charge.

PVC Junction box of size 140mmx140mmx95mm mounted on GI pipe with MS clamp made out of 40x6mm flat for fixing box on pole/wall including terminal point mounted on epoxy insulattor for cable connection with 01 No MCB Single pole 10 Amp incl taking down old one, complete all as specified and directed by Engineer-In-Charge.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed by Engineer-In-Charge.

Point wiring (concealed to surfaces) for one light/ fan/ bell point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint and with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 1.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-In-Charge.

Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed by Engineer-In-Charge.

Ceiling rose, three phase/ PVC/ polycarbonate, isolated body, complete all as specified and as directed by Engineer-In-Charge.

LED tube light fitting, 18 watt, indoor decorative aluminium extruded T5 LED battens, including LED lamp 18 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing light and making good disturbed surfaces of walls , complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Pride Plus LHEXBLP5PN1W018/ Crompton cat part LCTL-18-CDL/ Bajaj product code-12410, luminaire type- BCLSB 18 NW.

LED tube light fitting, 20 watt, indoor decorative aluminium extruded T5 LED battens, including LED lamp 20 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing light and making good disturbed surfaces of walls, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Pride Plus LHEXBLP7PN1W020 or Equivalent Makes in Crompton/Philips/Osram.

LED tube light fitting, 10 watt including LED lamp 10 watt, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing light and making good disturbed surfaces of walls, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Pride Plus Neo LHEXACP7IN1W010 or Equivalent Makes in Crompton/Philips/Osram.

Ceiling light 18 W Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution having Height: 27 mm for 18 W,ø 190 mm connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified, complete all as specified and as directed by Engineer-In-Charge. Make: Havells Cat part No LHEAAHP6IL1W018 or Equvalent makes in Philips/ Osram/ Crompton.

Ceiling light, size 600x600mm, with bright LEDs of 36 Watt, having superior illumination, connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In-Charge. Make: Crompton cat part No- CCR-127-36-57-SL-NWH (Aura-I) or equivalent in Phillips/ Havells/ Wipro.

Decorative, 1 N x 9 W LED Lamp wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including LED lamp of 9 Watt. Make: Havells ordering cat part No-LHFOAJE1TN1I060 or equivalent in Bajaj/ Philips/ Wipro/ Crompton.

Decorative, wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base., including LED lamp of 9 Watt, complete all as specified and as directed by Engineer-In-Charge. Make: Havells ordering cat part No-LHDL02160099 or equivalent in Bajaj/ Philips/ Wipro/ Crompton.

Moon (PRISMATIC) 20 W LED Lamp Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base dimension: Width: 200 mm & Height: 227 mm for Moon 200. Make: Havells ordering cat part No-LHFXBON1TN6F035 or equivalent in Bajaj/ Philips/ Wipro/ Crompton.

LED retrofit lamp, T-shape, capacity 12 Watt, B-22 holder base with ploycarbonate body and aluminium heat sink, warm/ white light, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- NU Bulb Plus 12 W 865 B22 3 Star (Ordering code-LHLDEUECNL8R012)/ Philips/ Osram/ Crompton.

LED retrofit lamp, capacity 7 Watt, B-22 holder base with ploycarbonate body and aluminium heat sink, warm white, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- LED ADORE 7 W B22 WW 3 STAR LAMP or equivalent in Bajaj/ Philips/ Wipro.

LED retrofit lamp, capacity 0.50 Watt, B-22 holder base with ploycarbonate body and aluminium heat sink, warm/ white light, complete all as specified and as directed by Engineer-In-Charge. Make: Havells/ Philips/ Osram

LED retrofit lamp, capacity 9 Watt, B-22 holder base with ploycarbonate body and aluminium heat sink, warm/ white light, complete all as specified and as directed by Engineer-In-Charge. Make: Havells/ Philips/ Osram.

Amount of Schedule of credit of for Rs 1,41,900.00 shall be deducted from quoted amount.

Usha Engineering Co.

M/S NARAYAN CONSTRUCTION

harish kumar and co

Nav Bharat Enterprises

Jiwan Singh

Kay Bee Traders