CERTAIN REPAIRS TO TILING, BRICK WORK, JOINERY, PLUMBING WORK, FALSE CEILING, ROOFING, PANELLING AND MISC REPAIRS TO BUILDINGS AT CHINTA, DUGGA, NASKA AND JAI AREA AT BHALRA MIL STN UNDER GE (I) 873 EWS

Amount

Demolition of brick work masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position complete and removing rubbish from the site, complete all as specified and directed.

Precast cement concrete 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, coloums, posts, boundry pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match, complete all as specified.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced, complete all as specified.

75mm thick, PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in plinth protection, surface finished even and fair, complete all as specified.

75mm thick, PCC 1:2:4, nominal mix, type B2, using 40mm graded crushed stone aggregate as in flooring/paving, surface finished even and smooth without using extra cement, complete all as specified.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work, finished even and smooth without using extra cement, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of debries outside cantt area, complete all as specified and as directed.

Vitrified coloured tiles, light shade of size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Non-skid coloured glazed ceramic jointless tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) 300mm x 300mm x 7mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

20mm to 25mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Mild steel rolled work as in doors or gates or study tables of angle or other section with gusset plates, rails, braces, eaves board etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. Note : The door frame shall be fixed in wall with PCC 1:2:4 type B-1 all as directed at site and the cost of the same shall be deemed to be included in quoted rate against the above item.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and as directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge including back filling with PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) , complete all as specified and directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Aluminium anodised, powder coated (minimum thickness of powder coating 50 micron) frames for doors, windows, ventilators, with one or more rebates including jointing cleat for fixing, complete all as specified, complete all as specified and directed.

Aluminium anodised, powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 12mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 250mm long (ISI marked), complete all as specified.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 150mm long (ISI marked), complete all as specified.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 100mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Hasp and staple, size 150 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified and as directed.

150mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repairs in floor, complete all as specified and as directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repairs, complete all as specified & directed.

Fancy type curtain rod 20 mm dia powder coated fixed to brackets in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Mild steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Refxing of serviceable Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour as in roof covering, fixed with self taping screws, complete all as specified and directed.

Self tapping screws 75mm long for fixing to old existing Pre-painted galvalume aluminium zinc coated sheets as in roof covering / cladding to walls, in buildings upto double storey height including all necessary scaffolding and safety arrangement complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

6mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal

flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in MES SSR Part-II, complete all as specified and as directed. Note: PVC frame shall be measured and paid for seprately

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in MES SSR Part-II, complete all as specified and as directed.

Prelaminated particle board, 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to iron frame work etc.all as specified and directed.

2nd class softwood plain cover fillets square, rectangular or triangular in section clean sawn fixed with nails or brads, sectional area exceeding 03 Sqcm but not exceeding 06 Sqcm complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity including taking down old complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity including taking down old complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), fixed in repairs, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe, fixed in repairs, complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe, fixed in repairs, complete all as specified and as directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

05 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) size 625mm x 365mm x 700mm with flushing cistern, snow white colour, including ‘P’ trap and soft close seat cover, complete all as specified and directed. Make : Cera 'Cruse' - WC Cat Part No S1031134, Cistern Cat Part No S1060106, Seat Cover Cat part No B1520110 or equivalent in Hindware / Parryware / Neycer

Vitreous China, wash hand basin, angle back, snow white of size 600mmx480mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, GI, medium grade, 32mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends, complete, fixed in repairs, complete all as specified.

PVC connection 60cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, fixed in repairs, complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

Grating doom 100mm dia of PTMT (Minimum weight 25gms), fised in repairs, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, 100mm dia made out of 1mm thick sheet, complete all as specified and as directed.

Cast iron 100mm bore rain water socketed pipes with cement joints, without ears including taking down old unserviceable pipe, complete all as specified and directed.

Cast iron Bends or elbows square, or obtuse suitable for 100mm dia CI rain water pipe, complete all as specified and directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

m/s vaid contractor and builders

VARDHMAN INTERNATIONAL

M/S MAQBOOL AHMED BHAT

SHARMA TRADERS

M/S KOTWAL CONSTRUCTIONS

A S CONSTRUCTION

Bidder Name

m/s vaid contractor and builders

VARDHMAN INTERNATIONAL

VEER TRADERS

SHARMA TRADERS

M/S MAQBOOL AHMED BHAT

M/S KOTWAL CONSTRUCTIONS

A S CONSTRUCTION