Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.2 LAccepted-AOC BHOTA TEHSIL BARSAR DISTT HAMIRPUR HP | L-1 | Accepted-AOC Accepted as L-1 and work awarded | |
| 2 | L-2₹27.5 L+₹13,391.73 (0.49%)Rejected-AOC 0 MATADIN KAKRAHI KAKRAHI BHARTHANA ETAWA ETAWAH UTTAR PRADESH 206242 | ETAWAH | UTTAR PRADESH | 206242 | L-2 | Rejected-AOC Accepted as L-2 | |
| 3 | L-3₹27.6 L+₹22,230.91 (0.81%)Rejected-AOC DISTT HAMIRPUR HP | L-3 | Rejected-AOC Accepted as L-3 | |
| 4 | L-4₹28.2 L+₹81,437.23 (2.98%)Rejected-AOC VILL P O PATHLIAR TEHSIL BARSAR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | L-4 | Rejected-AOC Accepted as L-4 | |
| 5 | L-5₹28.4 L+₹1.0 L (3.70%)Rejected-AOC | L-5 | Rejected-AOC Accepted as L-5 |
Tender Value
₹36.5 L
EMD Value
₹62,264
Closing Date
2 Dec 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer JSV Division Barsar
Executive Engineer JSV Division Barsar
SH- Construction of cement store at JSV Sub Division Barsar
2023_HPIPH_81829_1
24682-781 dt. 24.11.2023
Open Tender
Civil Works
Item Rate
120 days
JSV Sub Division Barsar
Please refer Tender documents.
7 documents required · 7 mandatory
₹400
Yes
Executive Engineer JSV Division Barsar
₹62,264
Yes
8 Feb 2024
25 Nov 2023
2 Dec 2023
25 Nov 2023
2 Dec 2023
25 Nov 2023
Amount
Excavation in foundation , trenches etc., in all kinds of soil such as pick work, jumper work blasting work, in soft / hard rock, including chiseling wedging out of rocks clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil upto any lead and lift clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge .
Providing and laying cement concrete work 1:4:8(1cement :4 Sand :8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work work in foundatuion and plinth in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing and laying cement concrete 1:1.5:3 ( 1cement :1.5 sand: 3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :
Foundation,footing.bases of columns & the like & the mass concrete complete in all respect within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.
Lintels,beams gorders bressumers & cantilevers upto floor two level complete in all respect within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.
Suspended floors,roofs,landing shelves and their supports balconies beams,girders bressumers and cantilever upto floor two level including carriage of material in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Column,pillars,posts & struts upto floor two level complete in all respect within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.
Brick work using common burnt clay building bricks (IInd class) in super structure above groubnd level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Half brick work using common burnt clay building bricks (IInd class) in in cement mortar 1:4 (1cement:4 sand) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge Profile-A
Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providng and fixing wire gauge shutters using GMS wire guage of IS gauge designation 85 G with wire of dia 0.56 mm for doors, windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws.2nd class deodar wood.40mm thick including 6 mm thick PVC solid sheet with required adhesive in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. above 200mm. In thickness with in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Vertical surfaces such as wall (any thick.) partitions & the like including attached pillasters, buttresses,plinth & string courses & the like with in all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.
Columns,pillars.posts & struts within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work..
Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level complete in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Boulder filling under floor etc.within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge
6 mm cement plaster to ceiling in cement mortar 1:3 (1Cement :3 Sand) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
20 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3(1cement:3sand) in all leads and lifts.
Distempering two coat with oil bound washable distemper of approved brand and manufacturers of required shade of undecorated wall surfaces to give even shade over and including a priming coat with alkali-resistance primer of approved brand and manufacturer after throughly brushing the surface from motor dropping and other foreign matter and also including preparing the surface even and sand papering smooth priming coat with distemper primer in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Finishing wall with water proof cement paint of approved brand and manufactuers and of required shade on undecorated wall surfaces ( two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Sliding door bolts 250x16mm in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Tower bolts (Barrel type) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge. 250x10mm.
Tower bolts (Barrel type) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge. 150x10mm.
Handles 125mm dia in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Handles 100mm dia in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6 (1cement :3sand:6 graded stone aggregate 20mm nominal size in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing and fixing stainless steel grill of required pattern in wooden frames of windows etc. with M.S. flat square or rounded with round head nuts and bolts or by screwed complete in all leads and lifts.
Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.
Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size) treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement in all leads and lifts
Providing and laying white glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry in all leads and lifts.
Steel work welded in built up sections,trusses & framed work, including cutting ,hoisting & fixing in position & applying a priming coat of red lead paint :- In grating, framed ,guards,bars, ladders, railing, brackets & similar works in all leads and lifts..
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge complete in all respects in all leads and lifts.
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges complete in all respects in all leads and lifts.
Providing and fixing 15 cm wide 45 cm overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm size bolts & nuts & washers etc. including making necessary connections withrain water pipes complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable omplete with all accesoriees as required as per the direction of Engineer-in-charge complete in all respects in all leads and lifts.. "Group-C"
Wiring for 3pin 5/6 amp socket outlet point on swich board in (surface/recessed PVC wiring system) and 5/6 amp tumbler piono type switch earthing the 3 pin painting etc as required omplete with all accesoriees as required as per the direction of Engineer-in-charge complete in all respects in all leads and lifts.
Wiring for power plug with (2x4 Sq.mm) PVC insulated,heat resistant flame retardant(HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated sigle core copper conductor cable for earthing as omplete with all accesoriees as required as per the direction of Engineer-in-charge complete in all respects in all leads and lifts.
Wiring for light plug with (2x1.5 Sq.mm) PVC insulated,heat resistant flame retardant(HRFR) and low smoke single core(flexible)copper conductor cable in surface/recessed PVC conduit along with 1 No. 1.5Sq.mm. HRFRLS/PVC insulated sigle core copper conductor cable for earthing as required complete with all accesoriees as required as per the direction of Engineer-in-charge complete in all respects in all leads and lifts.
Wiring for circuit/sub-main with 2x10 Sq. mm size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete with all accessories as required as complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, ainting etc. as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and erection of floor mounted fixed type metal frame work / boards of welded construction for switch gear mounting fabricated with M.S. angle iron (50 mm x 50 mm x 6 mm thick) of suitable dimensions with supporting members grouted 23 cm underground and frame work covered with 3mm thick M.S. sheet from top to a given height, with M.S. angle iron / 50mmx50mmx 6mm thick welded on the back and grouted into the back wall complete with painting and bonding to the existing earth as required with in all leads & lifts complete.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections,phosphatized and powder painted, including earthing etc. as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts. Double door-8 way
Supplying and fixing 63Amp rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required with in all leads & lifts complete. Cat. A
Supplying and fixing 63 amp rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required with in all leads & lifts complete Cat. A
Supplying and fixing 5 to 32 amp rating 240 volts "L" series MCB of single pole in the existing MCB DB complete with connection, testing and commissioning etc as required with in all leads & lifts complete.
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required with in all leads & lifts complete. Ceiling Fan 1200 mm sweep, Category-A
Providing, Installation, testing and commissioning of prewired flourscent tube fitting 1x40 watt box type Cat A i.e. Bajaj make complete with balast starter and capacitor but excluding flourscent tube rod suitable to operate on 240volt single phase AC supply directly on surface with copper wiring as required complete as per direction of the Engineer-in-charge.
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Extra for using salt and charcoal for pipe earth electrode complete as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and laying 6 SWG G.I. wire on surface / recess for loop earthing as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
P/F street light fixture 40watts 4 feet long complete with choke starter i/c connection complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
S.P. 5/ 6 Amps one way Modular switch complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
5 pin, 5/ 6 Amps Modular socket outlet complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Bell push, Modular complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
S.P. 15/ 16 Amps one way Modular switch complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
6 pin,15/16 Amps Modular socket outlet complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and fixing LED 11 watt suitable for D.C./A.C. single phase,230 volts complete as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required complete with all accessories as required as per thedirection of Engineer in Charges complete in all respects in all leads and lifts.
SANJEEV KUMAR
BBN Enterprises
shashi kant
Tilak Singh
Dinesh Kumar Sharma
PANKAJ MINHAS
Devender Kumar
DOGRATREDERS PVT LTD
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .