ADDN/ALTN/IMP TO CERTAIN MES QTRS AT AFS AMLA

Amount

Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifie and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding on ridge of roof to wall, fixed with self tapping screws complete all as specifie and directed.

Dismantling framed work timber scantlings 40 sq.cm and over in section,in any position complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410-W (Gde-E-250) Quality A) including distance pieces, cleats etc complete all as specified and directed.

M&L for brickwork with Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etcand fair finish surface complete all as specified and directed.

S & F TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping ends and binding mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

S & F TMT bars 06 mm dia and 08 mm dia cut to length bent to shape required including cranking, bending spirally for hooping ends and binding mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for Reinforced Cement concrete Nominal Mix (1:1.5:3) type A-1 (using 20 mm graded stone aggregate) as in Beams and columns in floors, roof, landing, balconices, canopies, deck slab and in shelves and th e like complete all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in two coats, (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete surface complete all as specified and directed. Note: - 1. Finishing layer mixed with water proofing compound @ 200ml per bag of cement or as manufacturer’s instruction. 2. WPC to be measured and paid separately.

Supply only liquid Water Proofing Compound.

M&L for preparing newly plastered surfaces of walls and applying two coat of weather shield/weather proof acrylic exterior emulsion paint (Apex Ultima Luxury emulsion of asian or equivalent of approved make by GE by skiled labour and applying one coat of acrylic water proof (Berger Damp Stop DUO Asina Smart Care etc) exterior grade primer @ 0.8 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless soray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI or using smart periodical methodology complete all as specified and directed. Note: Shade and pattern of the colour will be approved by GE

M&L for preparing external old decorative surface of walls and applying two coat of weather shield/weather proof acrylic exterior emulsion paint (Apex Ultima Luxury emulsion of asian or equivalent of approved make by GE by skiled labour and applying one coat of acrylic water proof (Berger Damp Stop DUO Asina Smart Care etc) exterior grade primer @ 0.8 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless soray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats including filling cracks with wall care putty wherever necessary complete all as specified and directed. Note: Shade and pattern of the colour will be approved by GE

M & L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of redoxide primer complete all as specified & directed.

M & L for Plain cement concrete 1:2:4 type B-0 (Using 12.5 mm grade crushed stone aggregate) as in copings, bed plates, banching and the like finished fair & even including necessary form work complete all as specified and directed.

Taking down chowkats or frames with shutters any type not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling of wall,display board/ceiling board fibre, pulb , insulation ets or insulation board/slab/wool of any thickness cover fillets complete all as specified and directed.

S&F grid of size 605x605 mm Anodised aluminium snap grid frame work for false ceiling all as specified and directed with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

Fixing in repairs only non asbestos fibre cement building boards of any type fixed ceiling flat or sloping to GI/aluminium frame complete all as specified and directed.

M & L for 6 mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed. (36.30 +22)

M&L for hardcore of guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Supply only chain link MS galvanised fencing of size 4" x 4" and dia of wire 4mm or any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, tightening complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for column,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securingwitj clips fe410w (Gde e-250) quality A or Fe 290 Gde E-165 complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and direcetd. (7.38+21.35)

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and direcetd. (28.92+0.25)

Material & labour for preparation of old decorative any interior surface of walls and applying priming paint followed by one coat of internal emulsion paint,anti-fungal and anti-bacterial(Asian-Royale or equivalent of approved bt GE) on wall surfaces using airless spray technology with max working pressure of 3300 PSI and xapable to operating single spray gun with max material whole length of 30mtr.The spray machine should be reporated manufacture with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacture and accesosries to be able spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/auto roller complete all as specified and directed.

Excavation in soft/loose soil for post holes (or similar holes) each n. exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation ,filling,and mass concrete complete all as specified and directed.

M&L for 20mm thick Granite (Z black) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed.

M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 100 mm thick; Plain Cement Concrete 1:2:4, Type B-2 (using 40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed.

Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Taking down old unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed.

Taking down existing single/three phase electric energy meter any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 marked drawn through in and including heavy duty grade (ISI marked) PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, with GI sunken boxes with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the One light point controlled by one, one way switch 5 Amps Note:- Cost of Modular Cover Plate, Inner frame suitable for mounting modular switches, socket etc are deemed to be included in the quoted rate.

All as per item No 49 above but One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed.

All as per item No 49 above but One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.

All as per item No 49 above but One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No 49 One bell point controlled by one, bell switch 5 Amps complete all as specified and directed.

All as per item No. 49 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed.

S&F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and directed.

S&F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed.

S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F bell push modular 6 Amps single module complete all as specified and directed.

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.

S & F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F ceiling fan 230V, 50 Hz AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed.

S & F exhaust fan, steel body AC single phase 230 Volts of size 300mm sweep with, blades, frame and louvers with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 0.75 Sqmm three core from ceiling rose to exhaust fan for connection complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of size 0.75 sqmm complete all as specified and directed.

S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and necessary mounting arrangements alongwith provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 0.75 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Taking down existing old unserviceable LT UG/service cable of any type or size complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 4 core x 16 sqmm complete all as specified and directed.

Supply and laying HDPE DWC pipe size outer dia 63 m, inner dia 50 mm for LT cable protection including sockets, bends etc complete all as specified and directed.

Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified and directed.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

M/s SHAKTI INFRASTRUCTURE (BID ID -3463374)

RAJBAITHE CONSTRUCTION COMPANY (BID ID -3459615)

Shri Sai Enterprises (BID ID -3462232)

M/s Vinod Yadav (BID ID -3462094)

Captainkomalchaharconstructions (BID ID -3463444)

PK CONSULTANT (BID ID -3462117)