PUC PG Acad. Block

Amount

A. ARTS BLOCK Main Building Earthwork in excavation over areas (exceding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (a) Ordinary and Hard Soil

Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. b) Hard Soil ( pick work ).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a) All work upto plinth level.

Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls, struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete. (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) (a) All work upto plinth level.

(b) All work above plinth level upto floor V level.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Centering and shuttering including strutting,propping etd. And removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

(c) Columns, pillars, piers, abutments, posts and struts.

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

f) Staircases (except spiral staircase) excluding landings.

Regular coursed rubble masonry with hard stone infoundation upto one storey above and below ground level including curing, etc. complete. b) in cement mortar 1:4 (1 cement : 4 fine sand)

Carriage by Mechanical Transoprt - for a lead of 5 kms b) Earth

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. a) in cement mortar 1 : 3( 1 cement : 3coarse sand )

First class brickwork in foundation and plinth in : (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (c) Powder coated

Supplying of glass panes at site. (b) 5mm thick plate sheet glass.

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing 40mm thick panelled door shutter comprising of styles and rails of seasoned teak wood with panels of Duratuff board 25mm thick as per required architectural design including M.S. butt hinges with necessary screws but excluding varnishing/painting etc.

Supplying and fixing MS decorative railing 80cm high in staircase consisting of 25mm MS aluminium square section @ 10cm centre to centre, 60 x 60 x 4mm thick base plate at the base fixed with wooden handrail with screws to receive the wooden handrails 12.5cm x 10cm including cost of polishing wooden handrails and MS railings.

20mm cement plaster 1 :3 (1 cement :3 fine sand).

15mm cement plaster 1 :3 (1 cement :3 fine sand).

6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (A) Gloss finish

(B)Matt/Antiscratch

Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connection set (a) Sintex or quivalent

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 40mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Add Passenger lift for 8 persons

Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface. (a) Ready mix white primer.

Wall painting with water and weather proof paint (Latex Emulsion base ) on cement works of approved brand and manufacture (ISI/ISO certified) of required shade on new work (two or more coats) to give an even shade .

Wall painting with interior emulsion paint of approved brand and manufacture on new work (one or more coats) to give an even shade. a) Regular interior emulsion like Rangoli delux emulsion etc.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.

Painting with synthetic enamel paint of approved brand and manufacture in all shade on new work (two or more coats). (b) High gloss

Septic Tank & Soak Pit Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. b) Hard soil ( pick work ).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: b) 1 : 2 : 4 (1 cement : 2 course sand : 4 stone aggregate 40mm nominal size)

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. a) in cement mortar 1:3 ( 1cement :4 fine sand)

12mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centering and shuttering including strutting, propping, etc., and removal of form works in - e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excluding cost of centering and shuttering and reinforcement in - (a) All work upto plinth level.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Providing and filling stone aggregates of size below 90mm in plinth, etc. in layers not exceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing complete .

Providing and fixing single equal SWRPVC plain junction of required degree (T-junction). a) 110x110x110mm.

Sanitary and Water Supply Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete. c) 25mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall b) 20mm nominal bore

c) 25mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work b) 20mm nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Reducer/Transition Bushing with jointing, testing complete including cutting and making good etc. a) 20 x 15mm

Making connection of Astral CPVC pipes distribution branch by providing and fixing Union Socket with jointing, testing complete including cutting and making good etc. a) 15mm dia.

b) 20mm dia.

c) 25mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc.a) 15mm dia.

b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Male Adaptor (Brass) with jointing, testing complete including cutting and making good etc. a) 15mm dia.

b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass Elbow 90o with jointing, testing complete including cutting and making good etc. b) 20x15mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 45o with jointing, testing complete including cutting and making good etc. b) 20mm dia.

Providing and fixing vitreous china water closet (EWC Extd. Wall Mtg. Constellation) including Seat Cover Constellation and lid with C.P brass hinges and rubber buffers, Cistern with Lid Constellation and Fittings (Water Saver) and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White

Providing and fixing vitreous china Urinal Flat Back Large 59 x 37.5 x 39cm of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White

Providing and fixing vitreous Division Plate 69 x 30 cm size for Urinals. (i) White

Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge..

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. (a)Class-III

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. i)White

Providing anf fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to cleats with C.P. brass screws and washers. i)White

Providing and fixing toilet paper holder. a)C.P. brass toilet paper holder of standard size.

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. a)110mm dia.

b)75 mm dia.

Rain Water Harvesting Tank Surface dressing of ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m . (a) All kinds of soil

Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. (a) Ordinary Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Stone pitching in cement mortar 1:3 (1 cement : 3 sand) in slopes of roads, in slopes of embankments etc. including supply of stone and preparing surface, etc. complete.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable / recoverable separately) a) All work upto plinth level.

(b) All work above plinth level upto floor V level.

Extra for providing richer or leaner mixes respectively at all floor levels . (a) Providing M-25 grade concrete instead of M-20 grade BMC/ RMC. (Note:- Cement content considered in M-25 is @ 330 kg/cum)

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Centering and shuttering including strutting,propping etd. And removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

(b) Walls including attached pillasters, buttresses, string courses, etc.

e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

First class brickwork in foundation and plinth in : (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

20mm cement plaster 1 : 4 (1 cement : 4 fine sand) finished with a floating coat of neat cement.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 well graded stone aggregate 20mm size) finished with a floating coat neat cement including cement slurry etc. complete but excluding the cost of nosing of steps etc.

Applying double coated PIDIFIN-2K on the surface of cement concrete for prevention of water infiltration and dampness in water tanks, basement, terraces, etc. @1.85kg per sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (f) 50mm dia nominal bore.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc. (f) 50mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (a) Sintex or quivalent

Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete. a) 110 mm dia.

Providing and fixing SWRPVC plain bend of required degree (45°) including jointing with rubber lubricant/cement solvent complete. a) 110 mm dia.

Providing and placing in position electric water pump of approved manufacture including connections to G.I pipes etc. complete with accessories. (b) 750 watts

1.8m high G.I. barbed wire fencing with 2.4m angle iron posts 50 x 50 x 6mm size placed 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm and using 12 horizontal lines and 2 diagonals barbed wire fixed from post to post with 'U' nails and projecting the angle post 2cm above the top most wire including earthwork complete.

Internal Electrification Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC casing & capping (gr-1) 20 mm dia' fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required. To a Light Points : (B) Short points

(C) Medium points

(D) Long points

(E) Very Long points

(G) 2 Points controlled by 1 switch

To a Ceiling Fan Points (D) Long points

LIGHT SOCKET/PLUG POINT 5/6A : Wiring in looping system with PVC wire sheathed copper conductor/wires as per IS : 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC casing & capping (Grade-1) 20x12mm' fixed. surface on the wall/ ceiling/floor as per convinience including junction box having required numbers of ways from DB to the light plug / socket 5/6A point etc. as required :- (A) Short points

(B) Medium points

(D) Long points

(E) Very Long points

MAIN TO SUB - IN IN COPPER WIRE GRADE - 1 SURFACE (1-Ph,2-Wires) Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC cassing & capping (Grade-1) 20x12/25x12/32x12/38/40 x 15/20 mm dia' fixed, surface on the wall/ceiling/ floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/Sub-main/DB to SDB/Switch boards/ SDB to switch boards 2 X 10 sqmm

Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1990) and life shield - Halogen Free Flame Retardant (HFFR)/FR 1100 voltage graded copper flexible wire stranded copper running inside PVC cassing & Capping (Grade - I) off all available sizes dia' fixed, surface on the wall/ceiling/ floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/Sub-main/DB to SDB/Switch boards/ SDB to switch boards as required :- 4 x 16 Sqmm

4 x 25 Sqmm

MCB Distribution Boards : Supplying and fixing of different numbers of ways MCB distribution board(DB) Double Door(D/D),extended loose wire,multi phase incoming and multi phase outgoing, SP & N, TP & N ,in sheet steel, phosphatised powder painted MCB DBs with Bus Bar , Neutral link, earth bar and din rail conforms to IS:13032/IS:8623/BS:5486, 240/415 volts, 50Hz, AC supply on surface including interconnection, painting etc. in completed INCOMING/OUTGOING : 4-ways MCB DB SP&NDD Metallic door

4-ways MCB DB TP&N DD Metallic door

Supplying and fixing of all types and ratings MCBs,RCCBs,ELCBs etc. 240/415 volts 50Hz AC supply in the existing MCB DB complete with connections,testing and commissioning etc in completed :- 5-32amp SP MCB 'B' series

40amp DP MCB Isolator

63amp FP MCB Isolator

LIGHTING FIXTURES: Supplying and fixing of batten/ angle holder including connection etc in completed :-

CFL Ball 9W Lamp B22,E27 Base Havells /Equivalent

Installation,testing & commissioning of pre-wired flourescent Light fittings of all types with accessories and tubes etc,…with 1.5sqmm copper conductor single core cable

Downlight 16W LED 4K/6K SOLITAIRE LED Recess mounted downlighter with extruded Al. heat sink with high brightness LED, ideally suited for low ceiling areas to give glare free light. (Havells/ Phillps/Gromton/Bajaj/SYSKA)

LED Flood light 100W for street lighting (Aristo/ equivalent)

Installation, testing and commissioning of ceiling fan and regulator, including wiring the down rod of standard length ( upto 30cm ) with 1.5sqmm PVC insulated copper conductor single core cable etc. incomplete

1200 mm Sweeps ISI Mark 3 blades (Crompton/Usha/

Supplying and fixing of Modular switch board of the following sizes/modules on surface/ recess including PVC/Steel boxes, modular plate and necessary switches, plug/socket, and fan regulators etc with necessary painting if necessary. A. One Module - 1S

B. Two Modules - 2S

C. Eight Modules - 6S+1Soc

D. Twelve Modules - 6S+1Soc+2R

EARTHING AND LOOP EARTHING Earthing with copper earth plate 600mm X 600mmX 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and water pipe etc. (but without charcoal and salt)completed.

Extra for using salt and charcoal for G.I or copper plate electrode completed

Supplying & laying of 8 SWG copper wire at 0.50m below ground level for conductor earth electrode including soldering etc in completed.

Supplying and drawing of 1.5 sqmm PVC sheathed copper conductor for loop earthing in the existing recessed UPVC conduit pipe etc along with other wires in completed.

Providing & fixing of lighting conductor final, made of copper tube, five finger system at the top, with 85mm dia' 3mm thick copper base plate

Providing & fixing of copper tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor completed (for vertical run)

Providing & fixing of copper tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor completed (for horizontal run)

Providing & Fixing of testing joint made of 20mmx3mm thick copper strip 125 mm long with 4 numbers of tinned brass bolts, nut and check spring washer etc. completed

Change over Switch 200A FP Off Load Changeover Switch

MCCB DISTRIBUTION PANEL MCCB Distribution Panel 6 ways with TP i/c Tap 2, 3P and TP o/g Tab 1, 3P with MCCB 125 Amps Tab 3 TP 25KA & 25-100 Amps Tab 1 TP 16 KA with digital metering modules

B. SCIENCE BLOCK Main Building Earthwork in excavation over areas (exceding 30cm in depth,1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (a) Ordinary and Hard Soil

Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. b) Hard Soil ( pick work ).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) a) All work upto plinth level.

Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls, struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete. (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately) (a) All work upto plinth level.

(b) All work above plinth level upto floor V level.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Centering and shuttering including strutting,propping etd. And removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

(c) Columns, pillars, piers, abutments, posts and struts.

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

f) Staircases (except spiral staircase) excluding landings.

Regular coursed rubble masonry with hard stone infoundation upto one storey above and below ground level including curing, etc. complete. b) in cement mortar 1:4 (1 cement : 4 fine sand)

Carriage by Mechanical Transoprt - for a lead of 5 kms b) Earth

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. a) in cement mortar 1 : 3( 1 cement : 3coarse sand )

First class brickwork in foundation and plinth in : (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (c) Powder coated

Supplying of glass panes at site. (b) 5mm thick plate sheet glass.

Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

Providing and fixing 40mm thick panelled door shutter comprising of styles and rails of seasoned teak wood with panels of Duratuff board 25mm thick as per required architectural design including M.S. butt hinges with necessary screws but excluding varnishing/painting etc.

Supplying and fixing MS decorative railing 80cm high in staircase consisting of 25mm MS aluminium square section @ 10cm centre to centre, 60 x 60 x 4mm thick base plate at the base fixed with wooden handrail with screws to receive the wooden handrails 12.5cm x 10cm including cost of polishing wooden handrails and MS railings.

20mm cement plaster 1 :3 (1 cement :3 fine sand).

15mm cement plaster 1 :3 (1 cement :3 fine sand).

6mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour. (A) Gloss finish

(B)Matt/Antiscratch

Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connection set (a) Sintex or quivalent

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 40mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Add Passenger lift for 8 persons

Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface. (a) Ready mix white primer.

Wall painting with water and weather proof paint (Latex Emulsion base ) on cement works of approved brand and manufacture (ISI/ISO certified) of required shade on new work (two or more coats) to give an even shade .

Wall painting with interior emulsion paint of approved brand and manufacture on new work (one or more coats) to give an even shade. a) Regular interior emulsion like Rangoli delux emulsion etc.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.

Painting with synthetic enamel paint of approved brand and manufacture in all shade on new work (two or more coats). (b) High gloss

Septic Tank & Soak Pit Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. b) Hard soil ( pick work ).

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: b) 1 : 2 : 4 (1 cement : 2 course sand : 4 stone aggregate 40mm nominal size)

Half brick masonry with first class brick in superstructure above plinth level upto floor V level. a) in cement mortar 1:3 ( 1cement :4 fine sand)

12mm cement plaster 1 : 3 (1 cement : 3 fine sand).

Centering and shuttering including strutting, propping, etc., and removal of form works in - e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excluding cost of centering and shuttering and reinforcement in - (a) All work upto plinth level.

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Providing and filling stone aggregates of size below 90mm in plinth, etc. in layers not exceeding 10 cms in depth, consolidating each layer by ramming and watering and dressing complete .

Providing and fixing single equal SWRPVC plain junction of required degree (T-junction). a) 110x110x110mm.

Sanitary and Water Supply Providing and fixing CPVC Ball valve/ Globe/Stop & Waste valve/ Boiler drain etc. Complete. c) 25mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall b) 20mm nominal bore

c) 25mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work b) 20mm nominal bore

Making connection of Astral CPVC pipes distribution branch by providing and fixing Reducer/Transition Bushing with jointing, testing complete including cutting and making good etc. a) 20 x 15mm

Making connection of Astral CPVC pipes distribution branch by providing and fixing Union Socket with jointing, testing complete including cutting and making good etc. a) 15mm dia.

b) 20mm dia.

c) 25mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc.a) 15mm dia.

b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Male Adaptor (Brass) with jointing, testing complete including cutting and making good etc. a) 15mm dia.

b) 20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Brass Elbow 90o with jointing, testing complete including cutting and making good etc. b) 20x15mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 45o with jointing, testing complete including cutting and making good etc. b) 20mm dia.

Providing and fixing vitreous china water closet (EWC Extd. Wall Mtg. Constellation) including Seat Cover Constellation and lid with C.P brass hinges and rubber buffers, Cistern with Lid Constellation and Fittings (Water Saver) and C.I / R.S brackets, 40 mm porcelain enamelled flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White

Providing and fixing vitreous china Urinal Flat Back Large 59 x 37.5 x 39cm of Parryware/ Hindware/ Cera and equivalent make with flush valve/spray with C.I or R.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (i) White

Providing and fixing vitreous Division Plate 69 x 30 cm size for Urinals. (i) White

Providing and fixing Health faucet with flexible tube upto 1 metre long and holder of quality and make as approved by Engineer - in - charge..

Providing and fixing 15mm nominal bore chromium plated brass pillar cock of approved quality. (a)Class-III

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. i)White

Providing anf fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to cleats with C.P. brass screws and washers. i)White

Providing and fixing toilet paper holder. a)C.P. brass toilet paper holder of standard size.

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. a)110mm dia.

b)75 mm dia.

Rain Water Harvesting Tank Surface dressing of ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m . (a) All kinds of soil

Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. (a) Ordinary Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Stone pitching in cement mortar 1:3 (1 cement : 3 sand) in slopes of roads, in slopes of embankments etc. including supply of stone and preparing surface, etc. complete.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable / recoverable separately) a) All work upto plinth level.

(b) All work above plinth level upto floor V level.

Extra for providing richer or leaner mixes respectively at all floor levels . (a) Providing M-25 grade concrete instead of M-20 grade BMC/ RMC. (Note:- Cement content considered in M-25 is @ 330 kg/cum)

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

Centering and shuttering including strutting,propping etd. And removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

(b) Walls including attached pillasters, buttresses, string courses, etc.

e) Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj, etc.

First class brickwork in foundation and plinth in : (a) in cement mortar 1: 3 ( 1 cement : 3 coarse sand )

20mm cement plaster 1 : 4 (1 cement : 4 fine sand) finished with a floating coat of neat cement.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 well graded stone aggregate 20mm size) finished with a floating coat neat cement including cement slurry etc. complete but excluding the cost of nosing of steps etc.

Applying double coated PIDIFIN-2K on the surface of cement concrete for prevention of water infiltration and dampness in water tanks, basement, terraces, etc. @1.85kg per sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (f) 50mm dia nominal bore.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc. (f) 50mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (a) Sintex or quivalent

Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete. a) 110 mm dia.

Providing and fixing SWRPVC plain bend of required degree (45°) including jointing with rubber lubricant/cement solvent complete. a) 110 mm dia.

Providing and placing in position electric water pump of approved manufacture including connections to G.I pipes etc. complete with accessories. (b) 750 watts

1.8m high G.I. barbed wire fencing with 2.4m angle iron posts 50 x 50 x 6mm size placed 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm and using 12 horizontal lines and 2 diagonals barbed wire fixed from post to post with 'U' nails and projecting the angle post 2cm above the top most wire including earthwork complete.

Internal Electrification Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC casing & capping (gr-1) 20 mm dia' fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required. To a Light Points : (B) Short points

(C) Medium points

(D) Long points

(E) Very Long points

(G) 2 Points controlled by 1 switch

To a Ceiling Fan Points (D) Long points

LIGHT SOCKET/PLUG POINT 5/6A : Wiring in looping system with PVC wire sheathed copper conductor/wires as per IS : 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC casing & capping (Grade-1) 20x12mm' fixed. surface on the wall/ ceiling/floor as per convinience including junction box having required numbers of ways from DB to the light plug / socket 5/6A point etc. as required :- (A) Short points

(B) Medium points

(D) Long points

(E) Very Long points

MAIN TO SUB - IN IN COPPER WIRE GRADE - 1 SURFACE (1-Ph,2-Wires) Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1977) and FIA & TAC approved. ISO-9001 certified company make, the insulation strength of PVC not less than 660/1100 voltages graded stranded copper running inside PVC cassing & capping (Grade-1) 20x12/25x12/32x12/38/40 x 15/20 mm dia' fixed, surface on the wall/ceiling/ floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/Sub-main/DB to SDB/Switch boards/ SDB to switch boards 2 X 10 sqmm

Wiring in parallel system with PVC wire sheathed standard copper conductor/wires as per IS: 694 (1990) and life shield - Halogen Free Flame Retardant (HFFR)/FR 1100 voltage graded copper flexible wire stranded copper running inside PVC cassing & Capping (Grade - I) off all available sizes dia' fixed, surface on the wall/ceiling/ floor as per convinience including junction box having required numbers of ways from Main to Sub-Main/Sub-main/DB to SDB/Switch boards/ SDB to switch boards as required :- 4 x 16 Sqmm

4 x 25 Sqmm

MCB Distribution Boards : Supplying and fixing of different numbers of ways MCB distribution board(DB) Double Door(D/D),extended loose wire,multi phase incoming and multi phase outgoing, SP & N, TP & N ,in sheet steel, phosphatised powder painted MCB DBs with Bus Bar , Neutral link, earth bar and din rail conforms to IS:13032/IS:8623/BS:5486, 240/415 volts, 50Hz, AC supply on surface including interconnection, painting etc. in completed INCOMING/OUTGOING : 4-ways MCB DB SP&NDD Metallic door

4-ways MCB DB TP&N DD Metallic door

Supplying and fixing of all types and ratings MCBs,RCCBs,ELCBs etc. 240/415 volts 50Hz AC supply in the existing MCB DB complete with connections,testing and commissioning etc in completed :- 5-32amp SP MCB 'B' series

40amp DP MCB Isolator

63amp FP MCB Isolator

LIGHTING FIXTURES: Supplying and fixing of batten/ angle holder including connection etc in completed :-

CFL Ball 9W Lamp B22,E27 Base Havells /Equivalent

Installation,testing & commissioning of pre-wired flourescent Light fittings of all types with accessories and tubes etc,…with 1.5sqmm copper conductor single core cable

Downlight 16W LED 4K/6K SOLITAIRE LED Recess mounted downlighter with extruded Al. heat sink with high brightness LED, ideally suited for low ceiling areas to give glare free light. (Havells/ Phillps/Gromton/Bajaj/SYSKA)

LED Flood light 100W for street lighting (Aristo/ equivalent)

Installation, testing and commissioning of ceiling fan and regulator, including wiring the down rod of standard length ( upto 30cm ) with 1.5sqmm PVC insulated copper conductor single core cable etc. incomplete

1200 mm Sweeps ISI Mark 3 blades (Crompton/Usha/

Supplying and fixing of Modular switch board of the following sizes/modules on surface/ recess including PVC/Steel boxes, modular plate and necessary switches, plug/socket, and fan regulators etc with necessary painting if necessary. A. One Module - 1S

B. Two Modules - 2S

C. Eight Modules - 6S+1Soc

D. Twelve Modules - 6S+1Soc+2R

EARTHING AND LOOP EARTHING Earthing with copper earth plate 600mm X 600mmX 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and water pipe etc. (but without charcoal and salt)completed.

Extra for using salt and charcoal for G.I or copper plate electrode completed

Supplying & laying of 8 SWG copper wire at 0.50m below ground level for conductor earth electrode including soldering etc in completed.

Supplying and drawing of 1.5 sqmm PVC sheathed copper conductor for loop earthing in the existing recessed UPVC conduit pipe etc along with other wires in completed.

Providing & fixing of lighting conductor final, made of copper tube, five finger system at the top, with 85mm dia' 3mm thick copper base plate

Providing & fixing of copper tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor completed (for vertical run)

Providing & fixing of copper tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor completed (for horizontal run)

Providing & Fixing of testing joint made of 20mmx3mm thick copper strip 125 mm long with 4 numbers of tinned brass bolts, nut and check spring washer etc. completed

Change over Switch 200A FP Off Load Changeover Switch

MCCB DISTRIBUTION PANEL MCCB Distribution Panel 6 ways with TP i/c Tap 2, 3P and TP o/g Tab 1, 3P with MCCB 125 Amps Tab 3 TP 25KA & 25-100 Amps Tab 1 TP 16 KA with digital metering modules

SS Construction

Lushai Engineers