Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹6.9 L+₹57,060 (9.04%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹7.0 L+₹65,723 (10.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹7.9 L+₹1.6 L (25.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹7.4 L
EMD Value
₹14,880
Closing Date
2 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
PROVN OF ADDN/ALTERATION IN BUILDING NO. T-99 AT HQ CIF (R) UNDER AGE(I) CIF(R).
2022_MES_555650_1
AGE(I)/R-20/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF(R)
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹14,880
Yes
12 Nov 2022
3 Oct 2022
7 Nov 2022
3 Oct 2022
2 Nov 2022
18 Oct 2022
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof covering and removing from site of work complete all as specified and directed.
Dismantling of framed trusses n exc 10 m span including vertical post, complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n. exc. 4.00 sqm each and removing from site, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as directed.
Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified.
Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4, complete all as specified and directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.
Plain cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete, all as specified .
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed.
Mild steel tubular work in purlins, vertical posts, rafters,etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge.
Prepration of new or previously steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S & F prepainted galvatume zluminium zinc coating GI based semi corrugated/profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed. Note:- any damage to flooring (which is already fixed in building) during execution of work to be repaired by contractor at his own cost without any cost to department.
M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.
M&L for 100 mm thick plain cement concrete, 1:4:8, type D-2 ( using 40 mm graded crushed stone aggregate ) as in sub base and paving, complete all as specified and as directed.
25 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in sub base of floor surface finished even and fair to receive top layer all as specified.
Virified Ceramic tiles 10 mmthick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm,as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:6 including dismantaling /demolation/Taking down, complete all as specified and as directed. Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles
Ditto all as per item No 20 above but on vertical surfaces such as skirting, dados, etc.
M&L for non skid ceramic colour tiles 8 to10mm thick ( square/rectangle) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer in CM 1:6, complete all as specified and directed.
M & L for Glazed ceramic coloured printed tiles (first quality) of size 350 mm x 250 mm x 7 mm/450 mm x 350 mm x 7 mm thick as in vertical surface, dado/skirting, over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F anodised aluminium snap grid frame work of size 600 x 600 mm for false ceiling complete all as specified and directed by engr-in-charge.
S&F 8 mm thick armstrong false ceiling board (595x595) mm size and fixed to snap grid ceiling frame work complete all as specified and directed by engr-in-charge.
S&F 15 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.
S & F TITANIUM wall mixer (3-in-1) cast copper alloy chromium plated with telephonic shower and overhead shower with bend etc complete all as specified and directed. Make:-CERA Cat No. F1003403 or equivalent cat part of make as specified in list of make here-in-after.
S & F 1.5metre flexible stainless steel hose, complete all as specified and directed. Make:-CERA Cat Part No. F8070401 or equivalent cat part of make as specified in list of make here-in-after.
S & F shower hook cast copper alloy chromium plated complete all as specified and directed. Make:-CERA Cat Part No. F8070102 or equivalent cat part of make as specified in list of make here-in-after.
S & F hand shower green in size 100 x 55 mm (4" x 2") with 130 mm (5”) long arm cast copper alloy chromium plated, complete all as specified and directed. Make:-CERA Cat. No. F7030102AB or equivalent cat part of make as specified in list of make here-in-after.
S&F overhead rain shower square 200x200 mm (8" x 8") cast copper alloy chromium plated, complete all as specified and directed. Make:-CERA Cat. No. F7010502AB or equivalent cat part of make as specified in list of make here-in-after.
S&F overhead shower arm cast copper alloy chromium plated 450mm with wall flange, complete all as specified and directed. Make:-CERA Cat. No. F7040106 or equivalent cat part of make as specified in list of make here-in-after.
S& F angle cock cast copper alloy chromium plated with wall flange, complete all as specified and directed. Make:-CERA Cat. No. F1003201 or equivalent cat part of make as specified in list of make here-in-after.
Vitreous china one piece EWC with seat cover and twin flush fittings snow white Model Name : CASINO 660 x 350 x 760 with S Trap 220mm, including fixing with screw/bolts fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S1013149 or equivalent cat part of make as specified in list of make here-in-after.
Vitreous china wall hung wash basin with full pedestal snow white, excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, etc. fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S2040122 for basin & Cat. No.S2090107 for pedestal or equivalent cat part of make as specified in list of make here-in-after.
VICTOR single lever basin mixer cast copper alloy chromium plated with 450mm branded connection pipe bore dia of pipe 15mm fixed in repairs complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F1015451 or equivalent cat part of make as specified in list of make here-in-after.
S & F 32 mm PVC waste pipe for wash hand basin, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts with length 300mm long, complete all as specified and directed.
S&F 2 way bib cock with side handle, wall flange and aerator cast copper alloy chromium plated, bore dia of pipe 15mm fixed in repairs complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F1003161 or equivalent cat part of make as specified in list of make here-in-after.
Health faucet brass body with wall hook and 1 metre SS braided rubber hose pipe,complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F8030301 or equivalent cat part of make as specified in list of make here-in-after.
Toilet paper holder with flap guard chromium plated, complete all as specified and directed by Engineer-in-charge. Make:-CERA Cat Part No. F5002110 or equivalent cat part of make as specified in list of make here-in-after.
Towel ring chromium plated complete all as specified and directed. Make:-CERA Cat Part No. F5002105 or equivalent cat part of make as specified in list of make here-in-after.
Towel rack chromium plated 600mm fixed in repairs complete all as specified and directed. Make:-CERA Cat Part No. F5002101 or equivalent cat part of make as specified in list of make here-in-after.
Soap dish chromium plated fixed in repairs complete all as specified and directed. Make:-CERA Cat Part No. F5007106 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Large) 300 x 300 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005103 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Medium) 225 x 225 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005102 or equivalent cat part of make as specified in list of make here-in-after.
Corner glass shelf (Small) 150 x 150 mm complete all as specified and directed. Make:-CERA Cat Part No. F5005101 or equivalent cat part of make as specified in list of make here-in-after.
Powder coated stainless steel peg set of six complete all as specified and directed by Engr-in-charge.
75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.
75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engineer-in-charge.
S&F 75mm bore PVC (SWR) bends, complete all as specified and directed.
S&F for 110mm dia PVC (SWR) bends any radius, complete all as specified and directed.
75mm bore PVC (SWR) vent cawl complete all as specified and directed by Engineer-in-charge.
Pvc (SWR) 75mm floor trap, plain with gratting, including jointing with solvent cements complete all as specified and directed.
Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 3/4 section ) in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching for 150mm dia of pipe, complete all as specified and directed.
S & F Mild steel work as in wind ties and similar work , including all necessary drilling, bolting and securing bolts confirming to Fe-290 Gde E-165 including one coat of red oxide, complete all as specified and directed.
M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing not exc. 10cm girth, complete all as specified and as directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, contilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough furnished surface of concrete complete flat, all as specified.
Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed by Engr-in-Charge.
Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Providing and applying plaster of paris putty of 1 mm thickness over plastered or unplastered surface to prepare the surface even and smooth, complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvrnt cement and fixing at site on PVC/wooden frame as per specifications and drawing
S & F anodized aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows ventilators and partitions with one or more rebated including joining cleat for fixing etc complete all as specified and directed.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed.
S&F 4 mm thick figured glass pin head and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified.and directed
Anodised aluminium door shutters powder coated (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Toughned glass 10mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified.and directed
S&F 5 mm thick figured glass pin head and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified.and directed
S & F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane, complete all as specified and directed.
M&L for point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for followings :-
One light/fan point controlled by one way switch by one way switch 6 Amp 240 Volt
One three pin socket outlet 6 Amps independent board complete
One 3 pin 6 Amp socket out let on the same board with other switches with cables 1.5 sqmm
M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 2.5 sqmm multi stranded two single copper conductor in including PVC conduit pipe 20 mm dia complete with all accessories and with 2.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2.0 mm thick suitable for modular switch/sockets including inner and outer cover plate of adequate size complete all as specified and directed .
Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed
S&F of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.
Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed
M&L in replacement of modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.
S&F of ceiling rose, surface bakelite 65x50mm three terminals PVC/Polycarbonate complete all as specified and as directed
M&L of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 6 Sq mm and one run of 6 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping/PVC rigid conduit 20mm dia with necessary accessories complete all as directed. Note : 2 Runs of 6 sqmm cable and one run of 6.00 sqmm earth wire with PVC casing and caping shall be measured as on length.
M&L of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping/PVC rigid conduit 20mm dia with necessary accessories complete all as directed. Note : 2 Runs of 4 sqmm cable and one run of 4.00 sqmm earth wire with PVC rigid conduit shall be measured as on length.
Supply and Fixing of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, C Curve type of capacity 25 Amp, 10 kA, 240 Volt complete all as specified and directed.
Supply and fixing of Endura Linear NEO wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed. Make :Havells Cat Part No.DURALINEARNEOBS20WLED865SPCWH or equivalent cat part of make as specified in list of make here-in-after.
Supply and fixing of Endura Linear NEO wall mounted LED Batten 10 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed. Make :Havells Cat Part No.ENDURALINEARNEOBS10WLED865SPCWH or equivalent cat part of make as specified in list of make here-in-after.
Supply & Fix Ultra slim modern recess mounting luminaire with high performonging LEDs suitable for mounting with armstrong/grid ceiling of 2`x2` of 36 watt and connecting up with three core copper conductor cable of suitable size, complete all as specified and directed.
Supply & Fix Ultra New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output 08 watt. Make :Havells Cat Part No. Cat part No UNECOFIXDLR8WLED830S60 or equivalent cat part of make as specified in list of make here-in-after.
Supply and fixing of MCB distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, single pole and neutral 08 way. 230 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection including grouting in the wall, cutting & chasing etc complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including all connection complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.
Supply and fixing wall mounted fan 230 volts, 400 mm sweep and all accessories, complete all as specified and directed.
Supply and fix of electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete including all connection complete.
Supply and fixing MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing of MCB SPN 40 to 63 Amps C, 10KA, 230 volts 'C' series, complete all as specified and directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.
S&F of 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed.
Taking down and dismantling of split AC 1.5/2.0 TR (Indoor and out door unit) from existing location and keep in safe custody at site and refixing and install and testing the same including additional Gas charging and copper tubeing (5/8" and 1/4") upto 7.0 Mtr complete all as specified and directed
Taking down and dismantling of MCB DBs - 02 Nos, sheet metal enclosures - 02 Nos, Voltage stablizers-02 Nos, Switch boards-04 Nos, Light fittings any type-05 Nos and sub main wiring (Apprx length 30 RM) etc. including PVC conduit from existing location and keep in safe custoy at site and refixing the same after necessary complettion of civil work comlete all as specified and directed.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 3595.00 during AOC Note:- Tenderers shall not quote for this Schedule
NATIONAL TRADING COMPANY
MEHTA OM PARKASH
arneesh kumar suri
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .