SPL REPAIRS TO FENCING AT CARRIAPPA OFFR ENCLAVE UNDER GE PANAGARH

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc or for shafts, wells,cesspits, manholes,pier holes,etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil, complete all as specified and as directed.

M&L for brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (40 mm graded stone aggregate) in foundation , filling and mass-concrete, complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, rounded or chamfered on edges , complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint, complete all as specified and as directed.

Dismantling post (Steel or RCC) embeded in concrete, brick work, Masonary etc, any section including taking out embedded portion and making good disturbed portion

Excavation in post holes (or similar holes)each n exc 0.5 cum getting out ,returning filling in and ramming earth and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil, complete all as specified and as directed.

M&L for cement concrete in foundations, filling and mass concrete , type C-2 1:3:6 (40 mm graded stone aggregate) , complete all as specified and as directed.

S&F hand rails,half round or other section or core for wooden hand-rail straight portions, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including, screwing bolts; posts and struts in fencing including cutting tops to shapes asdirected, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290(Gde-E-165) , complete all as specified and as directed.

S&F framed work (Fe-410-W, Gde E-250,quality-A) as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete all as specified and as directed by engr-in-charge.

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described, complete all as specified & as directed by Engg-in-Charge.

Dismantling fencing wire mesh any type, complete all as apecified and as directed by Engineer- in -Charge

Supply only chain link MS galvanised fancing of mesh size 75x75 mm with min dia of wire 3.5 mm of weight per square metre Not exc 4 kg , complete all as specified and directed by Engr-in-Charge. Note: Ascertain the weight of Chain link fencing through BOO ordered by GE.

Fixing only chain link fencing including line wires, mesh size 75x75 mm and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long, Dia of neck 5 to 10 mm, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

Schedule of Credit

UNITED BUILDERS

Hooghly Construction Co.

S. D. Construction Co.

M/S SEHGAL CONSTRUCTION

FRIENDS CONSTRUCTION

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

NEELAM DINESH CONSTRUCTION CO

Tirupati Buildcon Pvt. Ltd.