bilaria

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m :As per D.S.R 2.8.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement :( 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.11

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).As per D.S.R 5.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.As per 2.25A

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22.6

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm DSR 11.41A.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R 5.1.3

Providing and applying plaster of paris putti of 2mm thickness over plastered surface to prepare the surface smooth as required for proper completion of work as per DSR 13.26

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.DSR 13.48A.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 100mm nominal inner dia. Pipes. DSR 18.9.9

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)30 mm thick shutters DSR 9.5.1.2

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR 13.48.3

Supply and fixing of sign board of size 1.20 x 0.90m with MS sheet of 18BG made of angle iron post 02(nos) of 1.20m in horizontal and 3.05m in vertical of size 40 x 40 x 5mm and flat iron for cross 02 (nos) 40 x 5mm with complete letter writing as per drawing (Rates are sanctioned by SE, RED Bly).

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) up to 25% : 4 graded stone aggregate 12.5mm nominal size including (Recycled Concrete Aggregate (RCA) up to 25%)). DSR 4.10

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.3

Supply and Fixation of 4mm thick translucant coloured plastic sheet i.e. cost of all hook bolts with nuts etc as required for proper completion of work

Supply and Fixation of 6mm china white glazed in flooring or stacking dado lade with 1:3 cement and approved coarse sand as per S.I. No 628

New work (two or more coats) with a base coat of white washing with lime DSR 13.39.1

New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR 13.41.1

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR no.: 18.48

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15MM DSR 18.52.1

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore DSR no.: 18.49.1 15.0mm dia nominal bore DSR 18.38.1

20.00mm dia nominal bore DSR 18.38.2

100mm dia internal dia PVC pipe 6Kg/Sqm

Supply and laying of brick ballast in soak pit (Chapter1)

Supply and laying of brick bats in soak pit (Chapter1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore DSR no.: 18.49.1

Excavation in foundation (with royalty Rs.14.00) SI No.251

Cartage of boring materials & hire charges

Labour cost on boring: Strainer boring of 150mm Dia casing pipe in normal strata. up to 5m

Testing of boring to create adequate cavity

P/F 100mm MS LC pipe

P/F 6 kgf/sqcm pvc pipe 100mm dia I.S.I.mark ( Lko. S.O.R.SI No.33 Lett.No.4739 Dt.29.4.08) SI.No.-730

P/F 6 kgf/sqcm pvc strainer, 100mm dia ( Lko. S.O.R.SI No.33 Lett.No.4739 Dt.29.4.08) SI.No.-730

P/F 500 micron nylon mesh (Sanction Est.No. 1 Dated 3.6.04)

P/F solvent cement solution (Sanction Est.No. 1 Dated 3.6.04)

P/F Nylon Rope (Sanction Est.No. 1 Dated 3.6.04)

P/F of 1H. P. Crompton Greaves heavy dyuty, factory fitted ISI marked submersible pump (Sanction rate S.E.R.E.D.Bly)

P/F of panel for 1 H. P., factory fitted,, Submersible pump ISI marked with starter. (Marked Rate)

P/F of Submersible copper wire, 3 quire (Marked Rate)

P/F of 32mm dia GI pipe (B Class) SOR Dated 20.5.2013

P/F of Kent Submersible cable grade 1100V ISI marked

P/F of 32 mm dia,5cm thick & 30 cm long MS Clamp

Wiring point for light 1.0 Sqr mm FRLSH PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sqm. FRLSH insulated copper conductor cable as earth continuity wire, piano type switch & ceiling rose/angle/battern holder on 3mm thick phenolic laminated backelite sheet etc. complete in all respect as directed including matching colour wash.SI No. 131C

Wiring point for Plug (5A) 1.0 Sqmm FR L.S.H. PVC insulated multistrand single core copper conducror cable in PVC conduite pipe concealed in the wall complete with 1.5 Sq mm PVC insulated multistrand copper conductor cable earth continuity wire ,piano type switch & socket on 3mm thick phenolic backelite sheet etc. complete inall respect SI No. 134C

Wiring point for fan /fresh air fan (light duty exhaust fan)with 1.5 sq.mm.FRLSH PVC insulated multistrand singlecore copper conductor cable in PVC pipe on surface complete with 14 SWG copperearth continuity wire, piano type switch & ceiling rose on3 mm. thick phenolic laminated backelite sheet etc,complete in all respect. SI No. 123C

Supply & wiring of sub main with two Number 2.5 Sqmm. PVC insulated 1100 V multistrand single core copper conductor cable in 20mm dia PVC conduite pipe concealed in wall with1No 1.5 Sq mm PVC FR L.S.H. P.V.C. insulated multistrand copper as earth earth continuity wire. SI No -1304C

Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfactionof Engineer in charge of work. SI No. 1203C

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.SI.NO 1139 (A)

Supply and fixing of 240V volts' L' series miniature circuit breaker 6Amp. To 32 Amp (10KA) in existing MCB. DB complete with connections as required as per Sl.No. 1002. CAT A

Supply of 48 inch ceiling fan 1200 mm Approved Compney

Supply of 9 Watt Led bulbs Approved Compney

Note- GST Shall be paid extra as per Rule Signature of Contractor

Please Enable Macros to View BoQ information