Construction of 2 Nos. Toilet Blocks and Repair, renovation and up gradation of Conference Hall of Govt. College of Education at Canal road, Jammu

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meteres lead. 1:3:6 or richer mix

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and fxing of tiled false ceiling of approved materials (12.5mm thick square egde PVC laminated Gupsem tile of size 595x595mm mad eof gypsm palsterd bord manufactured from natural gypsum laminated with white 0.16mm thick fire retardent PVC film on the face side and 12 micron metal Zed polyester on the back side with all edges sealed) with the face side PVC film whict both around the raps the edges and in true horizontal level suspended on linter locking metal grid of hot dipped galvonised steel sections consisting of main 'T' runner with suitably spaced joints to get requiored length and size of 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200 x 600mm and secondary cross "T" of length 600mm and size 24x25mm and made of size 0.30mm thick minumum sheet to be interlocked and midel of 1200x600mm the panel to form grids of 600 x 600mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/ making, opening for services like diffusers, grills light fittings, fixtures, smoke deterctors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fastners, 4mm GI adjustable rods with galvonised butterfly level chlips of size 85x30x0.8mm spaced at 1200mm center to center along main T, betweeen exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in-Chanrge. (The rate is excluding the cost of tiles which will be paid for seprately). 12.5 mm thick fully Perforated Gypsum Board tile madefrom plasterboard having glass fibre conforming to IS:2095 part I , of size 595x595 mm, having perforation of9. 7x9. 7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

12.5 mm thick fully perforated gypsum board

Providing and fixing flat pressed 3 1ayer medium density .particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be 12 mm thick

Renewing glass panes, with Putty & Nails wherever necessary: Float glass panes of thickness 4mm

Repairs to plaster of thickness 12 mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 metres lead with cement mortor 1:4 (1 cement :4 fine sand).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area of 3. sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50meters lead of are of 3 sq. meters and below

Fixing of chowkhats in exsisting opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) painting twoi coats of approved wood preservative to sides of chowkhats and making good the damaged to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead.

Door chowkhats

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (including glazing, panelling and dash fasteners etc) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)

Earthwork excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 mtr from cutting Edge, disposed earth is to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) (crushed)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level 1:3:6 grade (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (Crushed)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification

Brick work with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 cement : 6 coarse sand).

Extra for brick work in super structure above plinth level upto floor V-level (By manual means).

Half brick masonry with bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand).

Extra for half brick masonry in super structure above plinth level upto floor V-level.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering , finishing and Reinforcement- All work upto plinth level 1:1.5:3 (1 Cement : 1.5 course sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C work including straightening cutting, bending , placing in position and binding all complete thermo-Mechanically treated bars.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundation, footings, bases of columns etc. for mass concrete.

Lintels beams, Plinth beams girders, bressumes and cantilevers.

Edges of slabs and breaks in floors and walls under 20 cms size

Suspended floors, roofs, landings, balconies and access plateform.

Filling available excavated earth (excl. rock) in trenches, plinth sides of foundation etc in layers not exceeding 20cm in depth; consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

12 mm cement plaster of mix 1:6 (1 cement :6 fine sand)

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for seprately). Sal wood.

Providing and fixing 35mm panelled and glazed shutters for doors, windows and cleresory windows including ISI marked, MS. Pressed but hinges bright finished of required size with necessary crew excluding panelling which will be paid for separately, all complete as per direction of Engineer in-charge. second class deodar wood.

Providing and fixing panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply 9mm thick decorative ply wood both side decorative veneer (type-I) conforming to IS 1328 BWR type.

Float glass panes 4 mm thick glass panes

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws Second class deodar wood

Providing and laying DPC 50mm thick with cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.8% and conforming to IS: 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (size of tile 60 x 60 cm)

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

6 mm cement plaster of mix 1:3 (1 cement : 6 coarse sand).

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer in- Charge.

Finishing wall with Delux multi surface paint system for interiors and exteriors using primer as per manufacturers specifications Two or more coats applied @ 1.25 litre 10 sqm over and including one coat of special primer applied @ 0.75 litre / 10 sqm

Paintaing with synthetic enamel paint of approved brand and manufactutre of required colour to give an even shade Old work (one or more coats)

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to I.S: 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required W.C pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. long pan pattern white vitrieous china WC pan of size 580mm

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,f, or the reception of pipes and fittings.

Providing and fixing of Towel rod complete with brackets fixed wooden with CP brass screws with concealed fitings affangements of approved quality and colour (450mm long towel rod with total length of 495mm x 78mm wide and effective height of 88mm weighning not less than 170gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete semi rigid pipe 32mm dia.

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore.

Providing and fixing miror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular shape 453 x 357 mm.

Providing and fixing sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing CP cups

Cutting holes up to 30x30 em in walls including making good the same : With common burnt clay F.P.S. (non modular) bricks

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)

20 mm dia. nominal bore

15 mm dia. nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. internal work exposed on walls

15 mm dia. nominal bore medium

20 mm dia. nominal bore medium

25 mm dia. nominal bore medium

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

20 mm nominal bore

25 mm nominal bore

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (75mm)

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion.

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. Single tee without door

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls. floors with cement corcrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. For pipes 100 to 250 mm diameter

Constructing masonry Chamber 60x60x75 em, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.l. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundation concrete 1 :5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick· finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks Crushed.

Providng and fixing CP brass bib cock of approved quality conforming IS 8931. 15 mm nominal bore

Providing and fixing of CP brass nose bib cock of approved qaulity conforming to ISI standard and weighing not less thatn 810gms. 15mm nominal bore (approved by Engineer in-charge).

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore

Providng and fixing CP brass angle valve for basin mixture and Gyser points of approved make conforming to IS : 8931. 15 mm nominal bore

Providing and fixing C.P jet with pipe of approved make complete job.

Providing and fixing water pump 1.0 H.P.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license. CP brass fitting

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement@ 0.488 kg/sqm mixed "Ywith with water proofing cement compound @ 0.253kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

Disposal of mulba by MT. incl. loading / unloading and carriage complete from designated sites and its disposal as per directions of Engineer in-charge, all inclusive (Av. Lead 10kms) out side the Municipal limits

Carriage of material by MT including loading /Unloading and stacking at site completed.

Sand/Stone aggregate below 40mm size av. 10 kms

Brick for an average lead of 10 km

M/S GLOBAL VENTURES

M/S JAI SHREE GANESH