SPL REPAIR TO BLDG NO T 171 AND 172 AND PROVN OF ENTRANCE GATE AT 527 ASC BN AT KALIMPONG MIL STATION UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and as directed.

S&F of joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quilty A), complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work), complete all as specified and as directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as specified and as directed.

M&L Non asbestos fibre cement building boards 6mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and as directed.

S&F 2nd class hardwood clean sawn boards or planks 25 mm thick & width n exc. 20 cm fixed with screws or nails in walls, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete, complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6), complete all as specified and as directed.

M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4), complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required, complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L 20 mm thick rendering ( in two coats 10mm+10mm) on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated, complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond, complete all as specified and as directed.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces cement mortar (1:3) on concrete surface as in ceiling/chajja and RCC surfaces, to be finished even and smooth (without using extra lime or cement), complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of priming coat on newly prepared wall surfaces, including 3 mm thick layer of wall care putty (Birla white or equivalent), complete all as specified and as directed.

M & L for completely removal of existing treatment from old painted plastered surfaces and on new plastered surfaces of any description over 10 cm or over and applying two coat of 100 % Acrylic emulsion paint including priming coat of exterior primer applied, complete all as specified and as directed.

M&L for preparation of old plastered decorated surfaces and applying one coat of premium Exterior emulsion paint, complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of Ceiling and applying two coats of white wash on walls, complete all as specified and as directed.

M&L scrapping of existing treatment and applying two coats of thin layer of wall care putty (Birla white or equivalent) and then applying two coats of oil bound distemper over a coat of priming coat after preparation of wall, complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and as directed.

M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge, complete all as specified and as directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, complete all as specified and as directed.

S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement, complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers, complete all as specified and as directed.

S&F in repairs angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

S&F Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed in wall, complete all as specified and as directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and size of rack 800 x 250 x900 mm with shape and pattern as per sample kept in Sample room of GE Office, complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges, complete all as specified and as directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and as directed.

S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device including dismantling existing EWC, complete all as specified and as directed.

S&F wall mixer 2 in 1 System-FLR with Provision for Overhead shower with 115 mm Long Bend pipe of make Jaquar or equivalent, complete all as specified and as directed.

S&F Vitreous China wash basin, flat back, size 600x480mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets, complete all as specified and as directed.

S&F fancy type, CP, pillar taps screwed down high pressure with or without hot or cold lettered with long screwerd shanks and fly nuts suitable for 15mm bore iron pipes, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkhats or frame nex exc 1.50 each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc, complete all as specified and as directed.

S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc, complete all as specified and as directed.

S&F 35 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers, complete all as specified and as directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F 35 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats, complete all as specified and as directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; t both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F steel window or ventilator fixed type with glazing bar, complete all as specified and as directed.

S&F of 200 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F of 75 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and as directed.

S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel, complete all as specified and as directed.

S&F 125 mm size Aluminium handles, cast type, anodised, complete all as specified and as directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F of 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and as directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0, complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, Knobs and rollers etc, complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Excavation in trenches, nexc 1.5 m wide and nexc 1.5 m in depth, for foundation,etc or for shafts,wells ,cesspits,manholes,pier holesetc nexc 10 sqm on plan and iexc 1.5 m in depth and getting out in soft soil, complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (40 mm graded crushed stone aggregate) in foundation,filling and mass concrete, complete all as specified and as directed.

M&L for RCC M-20 (20 mm graded crushed stone aggregate) in foundation, including, rafts, footing, foundation beams,plinth beams, bases for columns,etc basement slabs under reamed piles and mass concrete, complete all as specified and as directed.

M&L for RCC M-20 (20 mm graded crushed stone aggregates) in column,pillars,piers,posts and struts, complete all as specified and as directed.

M&L for Mild steel bars 10 mm dia and over, cut to length,bent to shape required,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

M&L mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binders, complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough and fair finished surfaces of concrete, complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough and fair finished surfaces of concrete, complete all as specified and as directed.

S & F PVC false ceiling with light weight PVC hollow section panel made of 1mm thick and over all thickness of panel 7 mm thick and 200mm vide strip of plain coloured / melamine finish , fixed in new false ceiling grid made of Aluminum / G.I / M.S / wooden, complete all as specified and as directed. Note : - New false ceiling grid of aluminium / GI / MS / wooden if provided shall be measured and paid separately.

S&F (Size of Grid 605x605mm) Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161*-1979 grade St.240, complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm as, complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in hard soil, complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) inculding finished even and fair on brick or concrete surface, complete all as specified and as directed.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings and fixture (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes, complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes, complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover of suitable size/on PVC rectangular box (flushed in permanent bldg and surface in temporary bldg or as directed) for mounting fittings like switch, socket, fan regulator etc, complete all as specified and as directed.

All as per item No 109 here-in-before but One bell point controlled by one switch.

All as per item No 109 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size.

All as per item No 109 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board.

All as per item No 109 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix Bell push button 5 Amp, flush type, complete all as specified and as directed.

Supply and fix Bell, Ding Dong electric AC 230 Volts single pole, complete all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5/6amps, one way, complete all as specified and as directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting, complete all as specified and as directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W complete, complete all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type, complete all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type, complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC, complete all as specified and as directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC, complete all as specified and as directed.

Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base, complete all as specified and as directed. Make : Cat part No LHFOAJE1TN1I060 of Havells or equivalent model of Philips/ Crompton.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down unserviceable one, complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting, complete all as specified and as directed.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series, complete all as specified and as directed.

S&F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, concealed in wall, complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, concealed in wall, complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP in the DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing in repairs 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 32 AMP capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

M & L in repair for sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 4.0 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 4.0 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm PVC casing caping on surface of wall/roofI, bends, tee, elbow etc. and making good the disturbed surface, complete all as specified and as directed. (Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

M & L in repair for sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 6.0 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 6.0 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm PVC casing caping on surface of wall/roofI, bends, tee, elbow etc., and making good the disturbed surface, complete all as specified and as directed. (Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including fixing arrangement complete all as specified and directed including taking down old u/s exhaust fan & deposit to MES Store, complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all fixing arrangement complete all as specified and as directed including taking down old u/s exhaust fan & deposit to MES Store, complete all as specified and as directed.

Supply and fixing electric water heater storage type wall hanging mounting type with powder coated metallic body BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V, maximum power consumtion-2kW of capacity 50 Ltrs, with all accessories and connection pipe 15mm bore 2 Nos for hot and cold water supply,geyser saftey cord with 16Amps ELCB, including taking down old u/s Geaser & deposit to MES Store, complete all as specified and as directed. Make : Havells Cat Part No : Monza Nu GHWAMUSWH025 or equivalent Racold, Bajaj

M&L in repair earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pi not les than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC (1:3:6) type C-1, 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I, complete all as specified and as directed.

Supply,laying,jointing and testing, fixing to wall /pole/floor using clamps or in air or passing through pipes /ducts / road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated, screened ,PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 volts grade with multistranded aluminium conductor of size 16 sqmm 4 core ISI marked ( IS - 7098 Part-1) and its latest amendments complete including taking down unserviceable one, complete all as specified and as directed.

M & L for Supply and pour natural river sand for cushioning of underground cable in trenches 8 cm below the cable and 15 cm thick over the cable all as directed and specified including watering and consolidation, complete all as specified and as directed. Note: Punned thickness of sand to be consider for measurement purpose.

M&L Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick, complete all as specified and as directed.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clamps with bolts nuts and washers including taking down unserviceable one, complete all as specified and as directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

APARAJITA GROUP OF CONSTRUCTION (BID ID -3365296)

G K SUTHAR (BID ID -3365249)

DEEP CHANDRA JOSHI (BID ID -3364936)

ANTHONY PRADHAN (BID ID -3364925)

HEM RAJ GURUNG (BID ID -3365245)

MOURICE CONSTRUCTION COMPANY (BID ID -3365081)

RAMESH GURUNG (BID ID -3367284)