Repair/renovation of toilet near SM-I at OFC Kanpur

Amount

Taking down old Chowkats with shutters (without taking off shutters from the frames) exc 1.5 sqm n exc 4 sq.mtr and deposited to store.

M&L of taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Complete removal of existing treatment before plastering.

M&L for spraying cement slurry 3.0 kg per sqm and rendering 12mm thick cement plaster 1:6 on fair faces of brick work or concrete on wall surfaces making even & smooth without using extra cement.

M&L of spraying cement slurry 3.0 kg per sqm & rendering 20mm thick (two layer) cement plaster 1:4 on fair faces of brick work or concrete on ceiling surfaces making even & smooth without using extra cement.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 at any height with proper scaffolding and safety.

M&L cement concrete 1:2:4 20.0 mm graded aggregate in foundation filling and mass concrete and finished surface even and smooth.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for non-skid colour ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(Make: Kajaria, Johnson, Somany)

M&L for glazed ceremic colour tiles in vertical surface 350x250x7mm/450X 300X 7mm and over, thick set and jointed in neat cement slurry and pointed in white or color cement to match. (Make: Kajaria, Johnson, Somany)

M&L for brushing neat cement slurry with 3.0 kg/sq.m & laying 15.0 mm average thick screed bed 1:4 ratio.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer.

S&F of steel ventilator with top hung shutter including hinges, steel peg stay, complete as specified in MES SSR part I 2009, part -II 2020 and as directed by EIC.

S&F 4.8 mm thick Plain glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane.

S&F of 200mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F of 150 mm of Aluminium handles,cast type, polished bright.

S&F of 150mm aluminium anodised, barrel tower bolts of extruded section and fixed.

M&L for 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls. (Make: Diplast, Fenolex, Ashirwad)

S&F Vitreous China wash down water closet pan (pedestal pattern), white colour (EWC) with Plastic water closet seat cover with recessed bottom and Mild steel chromium plated hinging device,complete. (Make:Cera,Parryware,Hindware ).

S&F of PVC valveless, syphonic action type, flushing cistern of 10 liter capacity, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe (fixing only), fixed in repairs (Make: Jaquar, Johnson, Parryware).

S&F of vitreous china urinal, half stall type, excluding waste coupling, flush pipe and waste pipe complete (Make: Jaquar, Johnson, Parryware).

S&F Vitreous china white color Squatting Pan Orrissa 'Pattern of size 580x440 mm white with integral footrest (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. (Make: Jaquar, Johnson, Parryware)

S&F of vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe) (Make: Jaquar, Johnson, Parryware)

S&F of Vitreous china urinal partition white, terminating about 40cm above floor line of size 310x700 mm. Make- Cera, Parryware, Hindware

S&F of Vitreous China wash basin, white, flat back, size 630x450mm with pedestal excluding taps, waste, chain and plug but including cutting for and pinning in ends of brackets or erecting stand. (Make: Jaquar, Johnson, Parryware)

S&F of 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.(Make: Jaquar, Johnson, Parryware)

M&L of Supplying and laying of 20mm outer dia meter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Make: Supreme, Finolex, Ashirvad, Prince, Kisan

M&L for Supplying and fixing of CPVC brass TEE suitable for Cpvc pipe outer diameter 20.0 mm.

M&L for Supplying and fixing of CPVC female brass threaded adapter size 20 mm.

M&L for Supplying and fixing of CPVC brass Elbow suitable for Cpvc pipe outer diameter (3/4" x 1/2").

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make - Jaquar, Johnson, Parryware)

S&F chrome plated 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make: Cera, Prayag, Parryware, Johnson)

Hoisting & fixing of rotational moulded polythylene water storage tank, 3 layer, capacity 1000 ltr (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. (Make: Sintex, Polycon, Diplast)

S&F of 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

S & F of PVC connections 15mm size with PTMT nuts of length 600mm. Make: Cera, Prayag, Parryware.

M&L for 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

M&L of PVC (SWR) gully trap 125/110 mm with gratting setting and jointing with solvent cement. Make: Supreme, Finolex, Ashirvad, Prince, Sintex, Kisan)

M&L for 50mm high density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F of 15mm concussive push button taps of cast copper alloy, screwed for iron pipe and fixed.

M&L for cutting into existing manholes for connecting 100mm internal dia pipe, new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

M&L for cutting chases (brick wall), pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth.

M&L for taking down old tarfelt and making the area clean with wire brush and washing the surface and preparing the surface for water proof treatment.

M&L of taking down cement plaster/screed on brick or stone walls, concrete etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for spreading of neat cement slurry @3.0Kg per Sqm over the rough surface before screed bedding.

M&L for 20.0 mm thick screed bed or plaster with 1:4 cement mortar on roof surface to make slope as well as smooth surface for receiving APP Memberane.

Supply of Liquid water proofing compound @200ml per bag of cement. Make: Pidilite, Asian, Mendo Semi Liquid.

Supply of bitumen primer oil based for use in waterproofing and damp-proofing treatments Make: Salitax primer STP, Dr.Fixit-Bitufix, IWL Chennai & Berger Bitumin Primer.

Labour charges only for applying of Bitumin primer @0.4 Lit/Sqm by using their own applying equipment.

M&L for laying of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified of any one. Make: IWL Chennai Ltd., STP Ltd., Asian or Pidilite Ltd, properly sealed with torch application to newly primed surface.

M&L apply 3.0mm thick water proofing wall care putty. ( Make: JK, Berger, Birla)

M&L for preperation of surfaces old plastered or unplastered of wall with washing, rubbing down and stopping of distempered and painted surfacesand apply two coat of oil bound distemper.

M&L for preperation of surfaces old plastered or unplastered of cieling with washing, rubbing down and stopping of distempered and painted surfacesand apply two coat of oil bound distemper.

M&L for prepartaion of sufaces with washing, rubbing down and stopping of distempered and painted surfaces & apply two coat of cement paint on wall.

M&L for preparation of new iron surface apply one coat of red oxide and two coat of synthetic enamel paint on prepared surface.

Material & Labour for necessary excavation work in soft soil up to 2.25mtr. Deep below normal ground level and getting out, including return filling in, including spreading levelling, watering and well ramming in layers not exc. 25cm. for earthing as required and directed by EIC.

M & L for cutting chases in brick wall for concealed conduit wiring suitable for 25 or 32mm conduit, pinning in, making good to facings and pointing in cement mortar 1:3 exceeding 10 cm girth but not exceeding 20cm girth.

Material & Labour for brick work for Earth pits with subclass 'B' Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing complete fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Taking down carefully copper/aluminium point wiring (Light, Fan, & Power) complete, removing materials to store for keep in custody for re use and making good disturb surface of wall, floor etc.

M/L point Wiring with copper conductor cables FRLS In PVC Conduit one light point, one fan point controlled by one switch with cables 1.5 sq.mm size & maintain color coding of wire Red- Phase, Black-Neutral Make for PVC pipe- AKG/Associate/Plaza For Cable- Finolex, Havells, Gloster.

M/L point Wiring with copper conductor cables FRLS In PVC Conduit one fan point controlled by one switch with cables 2.5 sq.mm size & maintain color coding of wire Red- Phase, Black-Neutral Make for PVC pipe- AKG/Associate/Plaza For Cable- Finolex, Havells, Gloster.

S & F wiring for circuit/ submain wiring in suitable PVC conduit of HMS type along with earth wire with 2 x 4 sq mm + 1 x 4 sq mm of FR PVC insulated stranded copper conductor, single core cable in surface/recessed as required & directed by E-I-C. Make for PVC pipe- AKG/Associate/Plaza For Cable- Finolex, Havells,Gloster

S&F of Powder coated Sheet Metal 4 way with 200 amps rated bus bar TPN DB with single door for TP/SP Outgoings, facility for using TPN MCB as incomer, complete with fixing arrangements. Make: Legrand, INDOASIAN, Siemens.

S&F Piano type Switch, 5Amp Flush type 230/250 volts AC, I.S.I Marked. Make-SSK, Anchor, Indoasian.

S&F Piano type Switch, 15Amp Flush type 230/250 volts AC, I.S.I Marked. Make-SSK, Anchor, Indoasian.

S&F Piano type Socket, 2 in 1, 3pin 5 & 15Amp Flush type 230/250 volts AC, I.S.I Marked. Make- SSK, Anchor, Indoasian.

S & F Ceiling Rose surface Bakelite, 65mmX50mm three terminals. Make:- SSK, Havells, Indoasean.

S & F of junction boxes with cover and outlets of external dia. 25 mm. Make:- AKG, PLAZA, ASSOCIATE.

M&L for Earthing complete with galvanized steel earth plate electrode 60×60cm.×6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less 'than 1.5 meters below normal ground level, connected to galvanized earth lead strip size 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

M & L for galvanized iron strip earthing lead of size 25x4mm to connect Power control Centers to earthing system as required & directed by EIC.

Supply and fixing 2 way surface/recess mounting, vertical type, 240 volt, SPN, MCB distribution board, vertical type, 240 volt, SPN MCB distribution board of steel sheet ,dust protected Make: Legrand, indoasian, Siemens

Material & Labour for providing Earth continuity conductor 2.0mm dia for loop earthing of cables, conduits complete.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 32A CURRENT carrying capacity in the DB complete with connection testing and commissioning MAKE-Legrand, indoasian, siemens, hager.

Supply & Fixing of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep

Material & Labour for GI Pipe 25 MM dia light grade duty for watering in earthing system as required and directed by EIC.

Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers MAKE- Khaitan, Almonard, Bajaj, Cromption, Usha, Polar, Orient.

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing of Motion sensor single lence, 360 degree, 6.0 Mtr dia detection, 10 Amp AC, 1 channel, surface/recessed mounted, adjustable time delay and lux setting. Make: Scheinder, Hager, Honeywell, LK and Legrand

Talson Builders (BID ID -936191)

N.P.INFRATECH (BID ID -936622)