Drydock repair work

Amount

Beaching, blocking, unblocking including dock hire and mooring charges as require to be done for complete repair of vessels. Blocking is to done at sufficient height for underwater inspection, scrapping, chipping, wire brushing, cleaning, repairing and painting as per under supervision of IRS. Total Area is 470 M2 approximately and 10 keel blocks

High pressure water washing and Sand plastering of the keel plate, hull plating , shell plating, and deck plating. Total Area is 470 M2

Labour charge for serial number 2.0 -Lumpsum

Material Cost for serial number 2.0 - ACTUAL COST PLUS 5% BASIS (The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Ultrasonic testing to be done of under water hull, deck plating , shell plating, hull to below water thickness to be carried out as per IRS requirement Total 600 spots

Cropping and Renewal of keel plates, side shell plates, web frames ,brackets, angle frames, deck plating , etc., as required as per the gauging report and advise by IRS qualified welders.

Labour charge for serial number 4.0

Material Cost for serial number 4.0 (10 mm for Keel & 8mm for Side plates as approved by IRS) - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) MS steel grade E250 BR for keel plate and other ship side plates Total 8 Tons

All plates welded to be carried out with dye test and water integrity test

Labour charge for serial number 5.0 Lumpsum

Chipping, scrapping, wire brushing, cleaning and painting is to be done for painting of vessel from keel to water level and painted by 3-coat as per painting scheme marine quality paint after applying 1 coat of anticorrosive paint/primer as per under supervision of IRS. Paints will be supplied by PSC

Labour charge for serial number 6.0 Lumpsum

Fuel oil tanks (Two) to be gas freed , cleaned of sludge and painted with bituminous paint as required

Labour charge for serial number 7.0 Lumpsum

Material Cost for serial number 7.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list shold be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Both main engine make-Vova Penta BHP 500*2 RPM 1800- Speed 12 Knots to be overhauled by the OME.

Labour charge for serial number 8.0 OME Cost PLUS 5% BASIS- Lumpsum

Material Cost for serial number 8.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Gear Box Type HC 300 Hydraulic Marine with Reverse reduction 3:1 to be serviced.

Labour charge for serial number 9.0 Cost PLUS 5% BASIS- Lumpsum

Material Cost for serial number 9.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Sea chest, suction & discharge valve, mud box, strainer, main and distribution valves, pipeline etc, is to be checked, cleaned with chemical wash as required and corroded anodes to be replaced along ship sides as required by IRS.

Labour charge for serial number 10.0 Lumpsum

Material Cost for serial number 10.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Generators 2 No 48 KVA to be over hauled and the batteries to be check for optimum conditions as per OEM-

Labour charge for serial number 11.0 -OME Cost PLUS 5% BASIS- Lumpsum

Material Cost for serial number 11.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

All Fire extinguisher to be pressure tested and serviced by DGS/ IRS approved company: 1. .Foam type-9kg, 2. DCP-6kg . All fire hose boxes are checked for foundations and nozzles to be polished to ensure the free rotation. All fire hydrants Valves to be over hauled and painted

Labour charge for serial number 12.0 Lumpsum

Material Cost for serial number 12.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Buoyant apparatus and Life raft to be serviced, tested by the approved authority.

Labour charge for serial number 13.0 Lumpsum

Material Cost for serial number 13.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Anchor chains to be ranged sand plastered marked and painted

Labour charge for serial number 14.0- Lumpsum

Material Cost for serial number 14.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Hydraulic steering system to be overhauled and synchronises with rudder reading on bridge and locally. Clean and overhaul Emergency steering

Labour charge for serial number 15.0 Lumpsum

Material Cost for serial number 15.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

All Bridge equipments are to checked for their conditions services as required along with audio and visual alarms working conditions for IRS satisfaction

Labour charge for serial number 16.0 - Lumpsum

Material Cost for serial number 16.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) - Lumpsum

VHF to be checked for audibility and synchronisation of frequency

Labour charge for serial number 17.0 Lumpsum

Material Cost for serial number 17.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

All Navigation light bulb contacts to be checked, if abnormal sighted, the same to be rectified. Provided one set spare of all bulbs ( Mast head light, side light, stern light all round lights). Aldis lamp to be checked for workability both power and battery source.

Labour charge for serial number 18.0 Lumpsum

Material Cost for serial number 18.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) Lumpsum

Steel fenders along ship side to be replaced

Labour charge for serial number 19.0 -Lumpsum

Material Cost for serial number 19.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) -Lumpsum

Overhauling the Air conditions all units ( Indoor and Outdoor three units)

Labour charge for serial number 20.0 -Lumpsum

Material Cost for serial number 20.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee) -Lumpsum

Both propeller shaft assembly and rudder shaft assembly to be cleaned and overhauled, stern bush clearence to be checked and renewal if required.

Labour charge for serial number 21.0 -Lumpsum

Material Cost for serial number 21.0 - ACTUAL COST PLUS 5% BASIS :(The proposed rate of materials/spare/ consumables along with applicable GST list should be submitted while Evaluation / Negotiation of tender committee)- Lumpsum

IRS survey payment for all above work and sea trial with speed check to carryout with GPS- Lumpsum

Cost of Ferry positioning and repositioning at Kanniyakumari ferry service,with safe manning cost and required diesel along with lubes. The contractor should get all statutory permission for the same.- Lumpsum

Rarefield Engineers (BID ID -1456875)

SEASHELL MARINE SERVICES PVT LD (BID ID -1458355)