SPL REPAIR OF 03 COOK HOUSE (P-122/A, P-122/B, P-124/A) AND 03 DINNING HALL (P-123/D, P-123/D/A, P-126/D) OF 8 RAJ RIF UNDER GE (I) KANPUR

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed.

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors/skirting etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles laid over screed bed or rendering including dismantling of old unserviceable tiles complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 350 X 250 / 450 X 300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles laid over rendering including dismantling of old unserviceable tiles complete all as specified and directed.

M&L for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles laid over screed bed or rendering including dismantling of old unserviceable tiles complete all as specified and directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 complete all as secified and directed.

M&L for 20 mm thick black granite (dark coloured) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and including demolition of old u/s stone slab complete all as specified and directed.

M&L for Pre Polished Kota Stone 20 - 25 mm thick laid over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match including rendering, moulding & polishing on exposed edges & incl demolion of old unserviceable stone complete all as specified and directed.

M&L for Pre Polished Kota Stone 20 - 25 mm thick as in skirting laid over and including 10 mm thick cement plaster in CM 1:4, fixed and jointed with grey cement slurry mixed with pigment to match incl demolion of old unserviceable stone complete all as specified and directed.

Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering of brick wall in CM 1:6 finished even & fair on other than fair faces complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer over applying a coat 1 mm of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and ceiling applying two coats of exterior weather proof anti algae 100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. (Make : Ist quality of approved make as specified).

Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and preparing the surfaces smooth including applying a coat of wall care putty 1 mm thick with 2 coats of oil bound distemper complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on wall complete all as specified and directed.

M/L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white wash on ceiling complete all as specified and directed.

Complete removal of existing treatment i.e. white wash, colour wash, cement paint etc. on wall and ceiling and preparing the surfaces smooth including necessary repair to depressions/cracks by wall care putty/POP and applying two coats of exterior weather proof anti algae 100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. (Make : Ist quality of approved make as specified).

Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete and all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified.

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets fixed in repairs complete all as specified and directed.

S&F 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifed and directed.

S&F stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building including connecting up pipes, securing access cover, float valve,tank adaptor etc of suitable size complete all as specified and directed.

S&F 20mm dia CPVC brass threaded ball valve screwed both ends for CPVC pipe complete all as specified and directed.

Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified.

S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F (SWR) PVC Pipe 75 mm pipes single socketed in any length with rubber ring joints fixed to wall / ceiling including necessary acessories for fixing to wall complete all as specified and directed.

S&F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling including necessary acessories for fixing to wall complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) 75 mm dia equal or unequal complete all as specifed and directed.

S&F PVC (SWR) junction single, (Single T) 100 mm dia equal or unequal complete all as specifed and directed.

S&F PVC (SWR) coupler 75 mm dia complete all as specified and directed.

S&F PVC (SWR) coupler 100 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet, plain with detachable SS grating jali with or without centre hole including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair Towel ring chromium plated dia not less than 15 cm with mounting brackets complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 60 above, but size 65 x 125 mm complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) incl. wire cloth consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame complete as per direction of EIC. Note : Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm.

S&F stainless steel butt hinges fixed using SS screws of required size complete all specified and directed.

S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 300 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F 5 mm thick glass each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc. complete all as specified and directed.

S&F 12mm thick prelaminated particle board both side with decorative choice laminations fixed on aluminium door shutter without including aluminium beading, rubber gasket etc. complete all as specified and directed.

S&F in repair powder coated Aluminium door partly glazed (using 5mm thick glass) and partly panelled or fully Glazed (using 12mm thick both side prelaminated board Noavapan Kitlam) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x 1.5mm thick incl 125mm dia circular aluminium handle tower bolt, mortice lock of brass size 65mm, vertical type with four levers door stopper double leg rubber beading and door spring of sandhu/sanant make, door stopper, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed by Engr -in- Charge. Note : Cost of glazing and panelling will be paid seperately under respective Item.

S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel of 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete as specified and directed. Note : Cost of glazing and SS wiremesh will not be paid under separate item.

S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steel fixed into frame using spot welding complete all as specified and directed.

S&F factory made steel tubular glazed (3mm glass) window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per HQ CELZ Drg No LZ/C-TD/130 sheet 1/4 to 4/4. Note : Cost of glazing will be not be paid under separate item.

S&F factory made steel tubular Steel gauged (0.36mm and 1.40mm aperture) window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as as per HQ CELZ Drg No LZ/C-TD/130 sheet 1/4 to 4/4. Note : cost of SS wiremesh will not be paid under separate item.

S&F, stainless steel curtain rods of 25mm dia as in doors/ windows SS brackets fancy type, including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

S&F PVC board of thickness 18mm with decorative choice lamination on one side and plain colour on other, having minimum density of 600 gm/cm3,Lead Free,Anti-Bacterial & Anti-Fungal,Termite & Borer Proof & Water Proof including cutting, screwing as in kitchen cabinet, almirah shutter also matching the sawn edges using same colour PVC edge band tape complete all as specified and directed.

M&L 150mm size stainless steel handles of design approved by GE complete all as specified.

S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mm complete all as specified and directed.

S&F SS 100 mm long hasp and staple, safety type, mild steel hinge pin inculding bolt to hinge plate and fixed and screws complete all as specified and directed.

S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down wall panelling, wooden flooring and similar work as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet incl fixing at site on PVC frame. PVC frame to be made using 5mm thick PVC sheet fillet incl fixing to wall as per specifications and direction of engr-in-charge complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

Point wiring for one light/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 90 above but upto ceiling height and on surface at ceiling complete all as specified and directed.

All as per item No 90 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit complete all as specified and directed.

All as per item No 90 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

All as per item No 90 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed.

Switch piano flush button single pole one way 15/16 amps 230 Volts complete all as specified and directed.

M&L for socket 5 amps 3 pin flush type, 230 volts complete all as specified and directed.

M&L for socket out let, 3 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC, system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed by Engr-In-Charge. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures.

S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 12 Watt Lumen (AC) 1200 Lumen (DC) 450 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified & directed.

S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as of VTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board, 4 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed.

All as per item No 105.00 above but for 8 way complete all as specified and directed.

S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and Current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No 107.00 above but SPN 40 to 63 Amp complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

M&L in replacement for submain wiring with four single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 sqmm with proper color coding and two single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

S&F triple pole and earth enclosure 63 amp three phase 415 volt with a three pin pin and earth plug with socket complete with one triple pole MCB complete all as specified & directed.

Dismantling & taking down old ceiling fan and deposited in MES Store & Supply, fixing and testing ceiling fan, white colour Energy saver 1200mm sweep (not exceeding 40 watt), 230 volts single phase complete Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) alongwith down rod, adequate size of clamp, making electric connection with PVC rounded 3 core 1 sqmm copper cable from ceiling rose to ceiling fan connector, including writing MES No. in black synthetic enamel paint / engraving with tool complete all as specified and directed.

Dismantling and taking down exhaust fan and deposited in MES Store & Supply and fixing of Exhaust Fan AC single phase 230/240 volts of size 300mm sweep with louver shutter complete including providing/cutting the round hole of required size in wall, grouting of nuts, bolts, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.

Dismantling & taking down old Geyser & deposited in MES store & Supply and fixing electric water heater, stoarge type made of ultra thick super cold rolled steel plates, feroglass dry powder coat-ing technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 35 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enemael paint/engraving tool etc complete all as specified & directed.

S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed

SHRI KRISHNA CONTRACTOR & SUPPLIERS (BID ID -3303251)

Vee Key Enterprises (BID ID -3303570)

Baba Siddhnath Construction (BID ID -3303506)

Khushi Muskan Engineer & Developer (BID ID -3299636)

U.R ASSOCIATES (BID ID -3303813)

JOG CONSTRUCTION (BID ID -3303302)

M/S KALI CHARAN PANDEY AND CO. (BID ID -3300690)

M/S VISHAL ENGINEERS (BID ID -3303829)