Construction of 21 Shops at old Garden Road infront of Garden Compound wall near Botanical garden in UMC

Amount

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 406 of MORTH specifications

Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .

Plain Cement concrete 1 : 4 : 8 (one cement, four sand and eight aggregates) using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS

Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc., complete as per SS

Plastering in cement mortar 1:3 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortar etc.complete complying with standard specification--10m2

Construction of Square shaped Four sided (Corner) shop of size 5x5 ft and height of 7 ft using Indian Standard Angle sections for the Vertical posts of size ISA 75X75X6 mm, Purlins and Rafters of size ISA 60x60x6 mm and Doors and Walls of size ISA 35X35X6 mm including cost and conveyance of all materials and labour charges for fabricating, etc., and Painting With Red Oxide Primer with two coats of best approved red oxide paint over the Iron Surface and two coats of best quality synthetic enamel paint etc complete complying with standard specification.,And Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI corrugated profile with a blue colour or any other approved design 0.47 mm thick 24 gauge having width of 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer,etc.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with Aluminium Zinc coating of 150 GSM paint thickness. The materials should be Anti- Corrosive, ISI certified, All weather protection with yield strength of 550 MPA. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and has directed by the departmental officers

Construction of Square shaped Three sided shop of size 5x5 ft and height of 7 ft using Indian Standard Angle sections for the Vertical posts of size ISA 75X75X6 mm, Purlins and Rafters of size ISA 60x60x6 mm and Doors and Walls of size ISA 35X35X6 mm including cost and conveyance of all materials and labour charges for fabricating, etc., and Painting With Red Oxide Primer with two coats of best approved red oxide paint over the Iron Surface and two coats of best quality synthetic enamel paint etc complete complying with standard specification.,And Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI corrugated profile with a blue colour or any other approved design 0.47 mm thick 24 gauge having width of 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer,etc.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with Aluminium Zinc coating of 150 GSM paint thickness. The materials should be Anti- Corrosive, ISI certified, All weather protection with yield strength of 550 MPA. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and has directed by the departmental officers

N. ARJUN