GE/H-28/2021-22 REPAIR/MAINT OF DG SETS AND OTHER ALLIED WORK AT AHRR UNDER GE E/M RRH DELHI CANTT-10

Amount

Attending of urgent complaints in any breakdown of standby DG sets upto 500 KVA at any location under GE, whenever required round the clock, rectify the fault and restore the standby supply within one hour after receipt of the complaint complete all as specified and directed by Engr-in-Charge. Note: (i) The quoted rates are included for minor itmes ie. copper wire, fuses, screws, indication relay & nuts bolts. (ii). The cost of replaced spare parts will be paid and measured separately.(iii) If complaint is not attended by the contractor within one hour, penalty of Rs. 2000/- shall be imposed on him. (iv) Contractor has to give the name of mechanic, electrician and helpers who will attend the urgent breakdown (v) The cost of transportation (to and fro) for all kind of necessary equipment/T&P shall be arranged/brought by contractor to complete the job at site or at E/M yard and no extra cost shall be paid to the contractor in this effect. (vi) Complaints shall be lodged telephonically, so contractor should give the telephone number which will receive the complaint round the clock.

Attending of urgent complaints in any breakdown of standby DG sets of 1000 KVA at any location under GE, whenever required round the clock, rectify the fault and restore the standby supply within one hour after receipt of the complaint complete all as specified and directed by Engr-in-Charge. Note: (i) The quoted rates are included for minor itmes ie. copper wire, fuses, screws, indication relay & nuts bolts. (ii). The cost of replaced spare parts will be paid and measured separately.(iii) If complaint is not attended by the contractor within one hour, penalty of Rs. 2500/- shall be imposed on him. (iv) Contractor has to give the name of mechanic, electrician and helpers who will attend the urgent breakdown (v) The cost of transportation (to and fro) for all kind of necessary equipment/T&P shall be arranged/brought by contractor to complete the job at site or at E/M yard and no extra cost shall be paid to the contractor in this effect. (vi) Complaints shall be lodged telephonically, so contractor should give the telephone number which will receive the complaint round the clock.

Attending of urgent complaints in any breakdown of standby DG sets of 1500 KVA at any location under GE, whenever required round the clock, rectify the fault and restore the standby supply within one hour after receipt of the complaint complete all as specified and directed by Engr-in-Charge. Note: (i) The quoted rates are included for minor items ie. copper wire, fuses, screws, indication relay & nuts bolts. (ii). The cost of replaced spare parts will be paid and measured separately.(iii) If complaint is not attended by the contractor within one hour, penalty of Rs. 3000/- shall be imposed on him. (iv) Contractor has to give the name of mechanic, electrician and helpers who will attend the urgent breakdown (v) The cost of transportation (to and fro) for all kind of necessary equipment/T&P shall be arranged/brought by contractor to complete the job at site or at E/M yard and no extra cost shall be paid to the contractor in this effect. (vi) Complaints shall be lodged telephonically, so contractor should give the telephone number which will receive the complaint round the clock.

Material & Labour for 'B' check kit of DG set 500 KVA of model KTA19G4-E of Cummins make as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 1500 KVA of model KTA50G8-1 of Cummins as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 500 KVA of model VTA-28-G of Kirloskar as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 1000 KVA of model KTA-3067-G of Cummins as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 250 KVA & 320 KVA of Cummins and Kirloskar as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 100 KVA Kirloskar & Crompton Greaves as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge.

Material & Labour for 'B' check kit of DG set 30 KVA CG as per company norms (a) topping up engine Oil (b) Change Engine oil filters (c) Check throtle linkage (d) Clean fuel tank breather (e) Supply and replace fuel filters (f) Supply and replace Crankcase breather (g) Supply and replace water filters (h) Check and top Coolant (j) Supply and replace all air Cleaners (k) Check leaks (l) Supply and replace Hose Flexible of all sizes (m) Supply and replace Clamp V Band (n) Supply and replace Hose Elbows (q) check tightness of V Belts (r) Supply and replace Hose pipe (s) Supply and replace Hose clamp (t) Supply and replace Clamp T Bolts (u) Supply and replace Hose Hump and testing complete all as specified and directed by Engr-in-Charge. Note: For item No. 04 to 10, Jobs shall be done as per manufacturer's instructions.

M&L for opening/taking out complete old cooling tower fills of any capacity of DG set for cleaning/removing dust, dirt, sand and cleaning storage tank properly and Supply and Replacement of PVC fills of size (24"x12"x6") for cooling towers, re-assembling the cooling tower parts and fitted properly including replacement of nut bolts with washer complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of FRP body of cooling tower as per existing size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC Branch Pipes of 15mm dia of cooling tower making suitable holes and proper fixing arrangement and testing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Header Pipe of 100 mm dia of cooling tower and make suitable holes for fixing of branch pipes and testing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of AVR (automatic voltage regulator) suitable for 100 KVA to 500 KVA DG (DG set of any make/model) and testing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of AVR (automatic voltage regulator) suitable for 1000 KVA to 1500 KVA DG (DG set of any make/model) and testing complete all as specified and directed by Engr-in-Charge.

Material & labour for opening / taking out of FIP (fuel injector pump) of DG set of 100 to 320 KVA capacity, disconnection of supply connection etc, carrying complete overhauling/servicing/reconditioning of Pump, with and including replacement of all unserviceable parts, as required, including testing complete and re-assembling the same, fitted with DG set properly in original location, checking and making proper all connections, testing for smooth operation complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of replaced spares / parts is deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. 2. The cost of transportation (to and fro) for all kind of necessary equipment / T&P shall be arranged by contractor to complete the job 3. The complete work is to be carried through the authorised service center of manufacturer only.

Supply and fixing, in replacement hose pipe for connectiong to tank of any size and length complete with clamp for DG set of capacity up to 320 KVA as per existing make/model complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement fuel tank lock for DG set of capacity up to 320 KVA and as per exisitng size complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement door lock for DG set of capacity up to 320 KVA and as per exisitng size complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement door hinges for DG set of capacity up to 320 KVA and as per exisitng size complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, fan belts, V-type No B124 suitable for cooling tower of DG Sets 500 KVA, complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, Electric control unit (ECU) duly programmed, fixed in DG Panel, with and including checking and rectifying/rewiring faulty electrical circuit, suitable for DG Set of any capacity, complete all as specified and directed by Engr-in-Charge.

Supply and filling, in replacement concentrated coolant in sealed packing suitable for DG Set of any type / make and capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, burnt/unserviceable thermostat with new thermostat alongwith complete assembly for existing make/model connection testing complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, battery terminals made of brass, heavy duty suitable for battery of any type/make and capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, battery 12 volts, 180AH 25 plate suitable for DG set upto 1500 KVA capcity complete all as specified and directed by Engr-in-Charge. Note:- Contractor will submit 5 years warranty for battery from the date of purchase.

Supply and fixing, in replacement, battery charging sets, automatic type/ adjustable type, suitable for charging 02 - 04 batteries in same time fixed in DG sets / panel with and including transformer (I/P-240/32 & O/P-28/26/24) with rectifier etc, including rewiring of faulty control circuit, complete all as specified and directed by Engr-in-Charge. Note:- Contractor will submit 3 years warranty for battery charger from the date of purchase.

M&L for painting exhaust system suppoot (30 meter height) of 1500 KVA DG set with 2 coat of synthetic enamel paint over a coat of red oxide after scrubbing, and cleaning of surface area complete all as specified and directed by Engr-in-Charge. Note: Contractor shall provide necesssary T&P & safety equipments to complete the job and rates are also included in the quoted rate.

Supply & fixing in replacement, of fuel shutoff valve assembly of any type of DG Set solenoid valve kit with and including taking out old valve assembly and making all connection, testing for smooth operation complete all as specified and directed by Engr-in-Charge. Note:- All the parts/components replaced in DG sets shall be compatible and of the existing make as of DG sets.

Material & Labour for taking out fuel from fuel tank and keep in container for refilling after cleaning, cleaning of fuel tank of DG set of any capacity, removing sludge and sediments deposited inside the diesel tanks by washing with detergent washing powder and air compressor including testing for proper working, complete all as specified and directed by Engr-in-Charge.

Material & Labour for painting of fuel tank of 990 ltr capacity with 2 coat of synthetic enamel paint after scrubbing, and cleaning of surface area complete all as specified and directed by Engr-in-Charge.

M & L for spray painting (including bringing compressor of suitable capacity at site) of exhaust system complete of 1500 KVA Diesel Generator set including scraping of old painting and painting of DG Set complete including canopy as per existing colour scheme and pattern with at least two coat of heat resistant paint to the entire plant and satisfaction of Engr-in-charge.

All as per item no 33 here in above but 500KVA Diesel Generator set.

All as per item no 33 here in above but 100KVA to 320KVA Diesel Generator set.

M&L for repair to DG Set Exhaust system & body upto 500 KVA DG set necessary welding to close holes at bends and places where holes with suitable sheets welding at rusted places complete all as specified and directed by Engr-in-Charge.

Supply and fixing, in replacement, water temperature meter, suitable for DG set of any type/make and capacity, complete all as specified and directed by Engr-in-Charge.

M&L in replacement for rewinding of electric motor of 10 HP of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same proper alignment testing & comissioning complete all as specified and directed by Engr-in-Charge.

M&L in replacement for rewinding of electric motor of 7.5 HP of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same to proper alignment after testing complete all as specified and directed by Engr-in-Charge. Note: For item ser No. 38 & 39 quoted rates is deemded to be include for disconnecting/reconnection/transportation etc to and from site. No extra payment will be made in this effect.

M&L in replacement for overhauling of pump of 7.5 HP, replacement SS shaft sleev, bearings, Mechanical seal, tyre coupling of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same to proper alignment after testing complete all as specified and directed by Engr-in-Charge.

M&L in replacement for overhauling of pump of 10 HP, replacement SS shaft sleeve, bearings, Mechanical seal, tyre coupling of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same to proper alignment after testing complete all as specified and directed by Engr-in-Charge.

M&L in replacement for overhauling of pump of 5 HP, rewinding of motor, replacement SS shaft sleeve, bearings, gland packing, tyre coupling of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same to proper alignment after testing complete all as specified and directed by Engr-in-Charge.

M&L in replacement for overhauling of motor of 5 HP of cooling tower of DG set , replacement of bearing, terminal plate including nut bolt and refixing the same to proper alignment after testing complete all as specified and directed by Engr-in-Charge.

Taking down exisitng serviceable cooling tower from exisitng position to shift where as directed including opening/ taking down all water connection/ electric connection, removal of fins, shifting of cooling tower on new bricks piller of exsting size, after shifting of the same all connection ie water / electric making good in all respects complete all as specified and directed by Engr-in-Charge. Note: 1. Rates for civil / labour work and T&P to lift & shift the cooling tower system including taking down GI tubing and electric connection are deemed to included in quoted rate. 2. Medium grade GI pipe off sizes will be measured and paid under Ser item No 45 & 46 here in after.

S&F in repair galvanized iron tube of the 80 mm bore sizes, ‘Medium grade’ with all fittings laid in trenches or on ground or on pillars complete all as specified and directed by Engr-in-Charge.

S&F in repair galvanized iron tube of the 25 mm bore sizes, ‘Medium grade’, with all fittings laid in trenches or on ground or on pillars complete all as specified and directed by Engr-in-Charge.

S&F in replacement butterfly valve of 80 mm dia CI body SS spindle and complete all as specified and directed by Engr-in-Charge.

S & F in replacement Non Return Valve 80mm dia complete all as specified and directed by Engr-in-Charge.

S&F in replacement butterfly valve of 50 mm dia CI body SS spindle and complete all as specified and directed by Engr-in-Charge.

S&F in replacement CI strainer flanged type 100 mm dia and complete all as specified and directed by Engr-in-Charge.

S&F in repair gun metal gate valve of 80 mm dia suitable for iron pipe both end internally threaded and all as specified and directed by Engr-in-Charge..

OMVIN ENTERPRISES LLP

CHAUHAN ENTERPRISES

Accurate Engineers

ACR ENTERPRISES

Surjit and Sons