CA NO GE(W)/HSR-44/2025-26 SPL REPAIRS TO BLDG NO P-289 AND PROVN OF UPGRADATION OF CERTAIN BLDGS AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Demolition of cement concrete(unreinforced)/ lime concrete as in sunken portion / ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:4 on faces of sunkan portion (floor and side) with smooth finishes using water proofing coumpand complete all as specified and directed.

M&L P:C:C 1:7:12 as in mass concrete using 40 mm graded brick aggregate as in sunken portion and other location as required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed Stone agg) as in sunken portion /padding leveling course providing necessary slope including WPC complete all as specified and directed.

S&F in Repair PVC Floor trap 75mm bore with grating including jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed.

S&F PVC in repair multi way Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed.

Taking down eaves gutter or RWP of any description( Dia of pipe upto 100mm) complete all as specified & directed by Engr-in-Charge. Including fittings complete all as specified and directed.

S&F, 110mm dia PVC SWR pipe of single socketed with rubber joint, jointed with solvent joint fixed to wall/ floor complete all as specified and directed.

S&F, 110mm dia PVC bend any radius complete all as specified and directed.

S&F , 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F , 110mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed.

S&F , 75mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints fixed to walls/ floor complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified and directed.

S&F PVC (SWR) double junction 'T' 75 mm bore with access door any radius complete all as specified and directed.

Taking up or down 15mm bore dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 16 mm Nominal dia CPVC SDR 11 fittings in wall/ceiling complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 20 mm Nominal dia CPVC SDR 11 fittings in wall/ceiling complete all as specified and directed.

S&F Brass Elbow for special fitting of 16 mm Nominal dia CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm Nominal dia CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm Nominal dia CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm Nominal dia CPVC pipe complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, light shade, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with 15mm screed in CM 1:6 complete all as specified and directed.

S&F of squating pan Orissa pattern of size 580X440 mm white with integel foot rest including connection to trap and to flushing pipe anti syphonage pipe complete including making good to floor complete all as specified and directed.

S&F in repair, PVC Low Level flushing cistern 10 lir capacity, valveless, syphonic action type with float, handle including 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

Supply & fixing in repair One piece WC with 10 ltrs capacity interal cistern with floor mounting frame, installation kit, drain pipe connection set, including necessary cuttingcutting to wall / floor making good to walls / floor complete all as specified and as directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe,32mm PTMT waste coupling, complete all ass specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F in repair Wall Mixer 3-in-1 System with telephonic shower rose with 115 mm Bend Pipe & Aerator complete all as specified and directed.

S&F 15 mm bore brass CP basin mixer long shank / pop up for mixing hot &cold water screwd down for iron pipe and fixed in repair complete all as specified and directed.

S & fixing in repair PVC Connection 15mm size with PTMT nuts of Length 600mm complete all as specified and directed.

S&F in repair Health Faucet with hose & hook complete all as specified and directed.

S&F in repair Toilet paper holder Chromium plated, fixed in wall complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms complete all as specified and directed.

Dismantling water tanks exceeding 500and not exceeding 2000 litres capacity and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colourcylindrical vertical with closed top) of 2000 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 10 mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

Description all as per item No 50.00 above but in 15mm CM 1:4 .Includind WPC complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L, 10mm thick rendering in CM 1:3 to brick/concrete ceiling surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M&L two coats of Oil bound distemper on new plastered or unplastered surfaces over and including 2 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty s including preparation of surfaces complete all as specified and directed.

M&L one coats of Oil bound distemper on old plastered or unplastered surfaces over and including 1 mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and including preparation of surfaces complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of alkali resistant paint complete all as specified and directed.

M& L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L of three coat of white wash on newly plastered surface as on celing including preparation complete all as specified and directed.

M&L of two coat of white wash on old plastered surface as on celing including preparation complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

S&F 100mm dia PVC (SWR) vent cowl complete in repair all as specified and directed.

Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified and directed. Note : Demolition work is to be carried out in portion of building hence necessary scaffolding and safety measurs required to support adjucent portions of bldg are deemed to be included in quoted rates.

S&F of iron angle in wall with using PCC of 1:3:6 (12.5mm graded aggregate) to support sheet of chajja complete all as specified and directed.

M&L RCC Nominal mix 1:1.5:3 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire 0.9 mm dia complete all as specified and directed.

Description all as per item No 66.00 above but 6 to 8mm dia complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 75mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F 2nd class Hard Wood 35mm thick flush shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class Hard Wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a) complete all as specified and directed.

M&L for rat rail spring for skelton door complete all as specified and directed.

S&F made single extruded WPC (Wood Polymer composite)) Solid door/ window/ceosetory windows & other Frames/ chowkhat of size 45 X 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carboante and natural fibers (Wood powder/roce hisk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms)fabricated with miter joints after applying PVC Solvent cement and screwed with full body threaded star headed SS screwes having minimum frame density of 750 Kg/cim screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2 modules of elasticty 900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/ moisyure proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and lentgh complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspensio Grade) calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and non toxicity additive (maximum toxicity index of12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Eage) minimum compressive strength 50 N/mm2 modulus of elastcity 850 N/mm2 and reistance to spread of flame of class A category with property of being termite/borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F Steel windows Z section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side z section hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Factory made Steel ventilator/windows (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed.

S&F Factory made Steel windows (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed.

Providing of guard bars in window and ventilator of mils steel or iron Fe-290 Gde E-165, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed in repair complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F MS butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F in repair 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.

Removing all disintregated and loose concrete of any thickness incl plaster if any in RCC Colmn, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper incl cleaning of exposed surfaces of reinforcemnet with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if reqd to reinforcement concret boind primer to exposed surfaces and applying cement moter 1: 3:4 with MPC (one part cement 3 part send : 1 part 6mm course aggregate) 2 and average thikness note less than 20mm including IRC 50mm x50mm)x 12mm gauge or reinforcement bars in the revoving debris all as specified and directed by EIC (Note : Upto the hight of 3(Three) storey building incl necessory scafolding to execute the work and IRC 50mmx50mmx12 guage or reinforcement bars shall be paid separatly) (Including wire mesh of 50mm x50mmx 12 guage) complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roof and removing complete all as specified and directed.

Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part there of.) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding ,levelling course and the like finish even and Fair 50mm average thickness or as required at site including preparation of RCC roof surface(old or new) with wire brush , drying and cleaning top remove loose particles, filling the cracks by crack filler complete all as specified and directed.

M&L for 10mm thick plaster on roof floor with CM 1:3 with WPC having proper smooth finish and proper slop complete all as specified and directed.

M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application including one coat of bituminous aluminium paint complete all as specified and directed.

M&L for Providing, cement concrete of 1:3:6 of Type C-1 20mm Graded aggregate in roof kerbs (Coving) , rounded or chamfered on edges, complete all as specified and directed.

S & F in repair fancy type Stainless steel curtain rod 25mm dia including SS brakcet, knobs, rings stops, rollers etc complete all as specified and directed.

Demolition of stone slabs and paver (interlocking )tiles of any description or thickness in floors,walls aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area.

Grinding and polishing of existing kota stone floor as directed by Engineer-in-Charge complete all as specified and directed.

Taking down old doors and make it fit for replace and again fix with using all necessary fittings required complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading,levelling, watering and well ramming in layer not exe 25 cm complete all as specified and directed.

Removing excavated materials(soils) to a distance exc 250m but not exc 500 M and depositing where complete all as specified and directed.

S&F , 150 mm dia (6'') PVC pipe of working pressuere of 4 kg/cm2 single socketed in any length and jointing pipes with ahesive solution in laid in trenches or in floors complete all as specified and directed.

M&L of type C-2,1:3:6 using 40mm graded agregate for Concrete bed to drain pipes of size 150 mm including packing under, and haunching :against the sides of pipes after they are laid and complete all as specified and directed.

M & L providing cement concrete type B1 1:2:4(20 mm graded aggregate) as in coping, water troughs and the like including weathering, slightly rounded or chamafered angles and throating complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/ filling and mass concrete. complete all as specified and directed.

M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces incl necessary moulds and setting in CM 1:4 complete all as specified and directed. Note : reinforcement to be measured separately.

High strength TMT steel bars as in reinforcement 10mm dia and over cut to length, bent to shape required, including cracking, bending spirally for hooping for columns, hooking endsand binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for 100mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L Providing and laying 60mm thick factory made hamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, fillingthe joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L Providing and laying 80mm thick factory made hamfered edge cement concrete paver block of M-30 grade with approvedcolour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, fillingthe joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M & L Painting steel/concrete surface of any description over 10 cm width and girth including preparation, primer with red oxide and two coats of synthetic enamel paints complete all as specified and directed.

M&L of cement concrete type B1 1:2:4 (40 mm graded aggregate) complete all as specified and directed

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, for MS railing at passage, stair and rear sitouts complete all as specified and directed.

M & L for frame and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc Fe-410-W (gde-E-250) quality B complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but nexc 10cm long and diameter of neck in mm 11 to 15 complete all as specified and directed.

M & L Painting steel/concrete surface of any description over 10 cm width and girth including preparation, primer with red oxide and two coats of synthetic enamel paints complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, frame for sliding windows (three panels, two pans for glass and one for wire mesh), frame for normal openable panel window ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powdercoated Anodised aluminium sliding windows shutters,aluminium section weighing 0.35 kg/m including all necessary items like -joining cleats,glazing clips, ruber neoprene packing,, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Powdercoated Anodised aluminium door, shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F powder coated aluminium deco grill fixed to powder coated windows complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F door closer Aluminium (Die cast) body hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane complete all as specified and directed.

Supply and fixing 4.8mm thick tinted sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and directed.

S&F as in brass Mortice lock,vertical type, 4 lever size 100 mm complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid framed work for false ceiling and incl hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete al as specified and directed.

S&F False ceiling with calcium Silicate board, perforated type, and acoustic purpose, factory made matt finish surface, 600mm x 600mm in size and 12mm thick complete all as specified and directed.

M&L Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.72 sqm, in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic existing concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site. Including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 147.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 147.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 147.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F Sheet metal enclosure distribution board SPN, 8 way, Double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing MCBs SPN 32 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

Supply only electric water heater storage type steel body with copper inner tank and heating lelement upto 2KW capacity 25 Litre BEE 5 star rated complete with all accessories such as safety valve, Thermostate, NRV, PVC connection piece etc all as sepcified and directed.

M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type AC ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm height complete all as specified and directed.

M & L for point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

Supply and install Spilit type Air Conditioner (AC) units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 ton complete all as specified and directed.

Supply and fixing voltage stablizer of capacity 5 KVA for automatic operation ,single phase, naturally air cooled ,indoor type ,designed for input variation between 170 volt to 270 volt and with output voltage stabiized at 230 volt with accuracy of +- 2.5% and connecting up alll as per manufacturer;s instructions and complete all as specified and directed.

Supply & Fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt complete all as specified and directed.

Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core, complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 20 AMP complete all as specified and directed.

S&F Sheet metal enclosure distribution board TPN, 4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with PCC works complete all as specified and directed.

Supply and fixing TPN 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCCB should be the same as that of DB

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Shiva Constructin Co. (BID ID -3524342)

M/s Rao Constructions, 1173 Urban Estate-II, Hisar (BID ID -3523831)

Deepak contractor (BID ID -3519258)

M/S RR ENGINEERING CO (BID ID -3520826)

SITA RAM AND SONS (BID ID -3523399)