Providing And Fixing Green GYm Play Equipment For Rock Garden Mahatma Phule Garden Suyog Nagar Nagpur

AIR WALKER/STORME RAMBBLER AREA: - 1.06Mtr x 0.81Mtr SAFE AREA: - 1.72Mtr x 1.06Mtr. Providing and fixing Air Walker made from “B” class G.I. Pipe. The main frame of Ø60mm made from “C” Class G.I. pipe, and The bottom support of M.S. round plate of Ø250 mm & 10mm thickness iswelded at bottom. The leg movement frame is of Ø40mm made from “C” Class G.I. pipe. The handle frame is of Ø32mm made from “C” Class G.I. pipe. The foundation used for fixing is consists of three equal items i.e. 90mmmade from “C” Class G.I. pipe, M.S. Round Plate of Ø250 mm & 10mmthickness & 25 mm X 25mm M.S. angle of 3 mm thickness. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are130mm X 310mm X 5mm.For the support 50 X 50mm X 2mm CRC squarepipe is used. Closing Caps made from top quality FRP material with 2 mm thickness. The pins used are made up of Ø 25mm bright bar. The bearings used are “6205zz” permanent lubricated sealed bearing ofreputed make (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70micron thickness.

CHEST PRESS/BUTTERFLY MACHINEAREA: - 0.71Mtr x 1.72Mtr.SAFE AREA: - 0.86Mtr x 2.48Mtr.Providing and fixing chest press made from “B” Class G.I. pipe.The center pipe is of Ø115mm made from “C” Class G.I. pipe, andThe bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom.The remaining frame is made up of Ø40mm“C” class G.I. pipe.The handle frame is made up of Ø32mm “C” class G.I. pipe .For the assembly different bushes are used which is made from 50mm with 3mm thicknessseamless pipe & 50mm solid bar is used.The foundation used for fixing is consists of three equal items i.e. Ø115mm made from “C” ClassG.I. pipe, M.S. Round plate of Ø250 mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle.The seats is fitted on the outer frame is made up of high quality FRP material of size 330 mm X300 mm of thickness 3 mm & M.S. Plate of thickness 5 mm and Size 250 mm X 200 mm is usedto Support it.Closing Caps are made from top quality FRP material which is of 2 mm thickness.The pins used are made up of Ø25 mm & Ø17mm solid bar.The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputedmake (FAG/SKF).High tensile steel with galvanized nut bolts are used for assembly.The serclips used for assembly is made up of Ø25 mm & Ø17mm.The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

ROWERArea:- 1.2 x 1Mtr.Safe Area:- 1.5 x 1.5Mtr.Providing and fixing rower made from “B” Class G.I. Pipe.The Main frame is of 80mm X 40mm & 40mm X 40mm CRC Pipe with 2 mm thickness.The handle frame is of Ø32made from “C” class G.I. pipe.The Foundation used for Fixing consists of three equal items i.e. Ø40mm made from “C”Class G.I. pipe, C channel of 75mm X 40mm X5mm & 25mm X 25mm X 3mm M.S. angle.To join the movement frame to main frame seamless pipe of Ø50mm & 3mm thicknessis used.The seats which are fitted on the main frame is made up of high quality FRP material ofsize 330mm X 300mm of thickness 3 mm & M.S. plate of size 250mm X 200mm X 5mm isused to support it.Closing caps are made from top quality FRP material which is of 2 mm thickness.The pins used are made up of Ø17mm hardened bright bar.The bearings used are of “6203zz” permanent lubricated sealed bearing of reputedmake (FAG/SKF).The handles used are of Rubber grip.High tensile steel with galvanized nut bolts are used for assembly.The bushes (Stopper) used to avoid the collusion.The serclips used for assembly is of Ø17 mm.The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micronthickness.

SEATING & STANDING TWISTER AREA: - 1.7 x 0.66Mtr. SAFE AREA: - 2 x 1Mtr. Providing and fixing Seating & Standing Twister made from “B” Class Galvanized Iron (G.I.) Pipe. The Center Pipe is of Ø100mm made from “C” Class G.I. Round Pipe, and The bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom.The standing frame of the Seating & Standing twister is of Ø40mm, Ø60mm, and Ø50mm made from “C” class G.I. pipe.The handle frame of Seating & Standing twister is Ø32 mm & Foot resting frame of seating side is made from “C” class G.I. pipe of Ø25mm & Ø 32mm. The seamless pipe is used for joining the centre pipe frame & handle frame is made from Ø130mm with 3mm thickness.The foundation used for fixing is consists of three equal items i.e. Ø 90mm made from “C” class G.I. pipe, M.S. round plate of Ø250 mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. The standing plate is fitted on the standing frame is made up of Ø 100mm seamless pipe & Seating plate is fitted on the frame is made up of Ø 60mm seamless pipe. Ø300mm x 10mmThikness M.S. Round Plate. Closing caps made from top quality FRP material which is of 2 mm thickness. The Pins used are made up of Ø 25 mm bright bar. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). High tensile steel with galvanized nut bolts are used for assembly. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SHOULDER BUILDER/HAND ROLLER Area:- Ø0.89Mtr. Safe Area:- Ø1.5Mtr. Providing and fixing Shoulder Builder made from “B” Class G.I. pipe. The Center Pipe is of Ø 115mm made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The handle movement frame is of Ø32mm & Ø25mm made from “C” Class G.I. pipe. To Join the centre pipe & handle movement frame seamless pipe of Ø 130mm & 3mm thickness is used. The foundation used for fixing consists of three equal items i.e. Ø 90mm made from “C” class G.I. Pipe, M.S. Round Plate of Ø 250 mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. Closing caps made from top quality FRP material which is of 2 mm thickness. The pins used are made up of Ø 25 mm bright bar. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly is of Ø 25 mm. The Poly Urethane plastic bush is used for handling. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

SIT UP BOARD/SEATED PANEL Area:-0.50 x 1.70 Mtr. Safe Area:- 0.86 x 2 Mtr. Providing and fixing Sit up Board made from “B” Class G.I. pipe. The main frame is of Ø40mm & Ø32mm made from “C” Class G.I. pipe. Perforated sheet of 1.5mm thickness is welded on 25 x 3mm thick flat Patti on main frame. The base side of the sit up board is made of 50 x 20 mm CRC pipe. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

SURF BOARD /WAVE PANEL Area:- 0.91 x 0.86Mtr. Safe Area:- 1.39 x 1.27Mtr. Providing and fixing Surf Board made from “B” Class G.I. pipe. The center pipe is of Ø115mm made from “C” class G.I. pipe, and The bottom support of M.S. plate of Ø 250 mm & 10mm thickness is welded at bottom. The handle frame is of Ø 40mm made from “C” class G.I. pipe. 

The foundation used for fixing consists of three equal items i.e. Ø 90mm made from “C” Class G.I. pipe, M.S. round plate of Ø250 mm & 10mm thickness, 25mm X 25mm X 3mm M.S. angle. To join the centre pipe & handle frame seamless pipe of Ø130mm & 3mm thickness is used. For the movement, bushes are used Ø60mm with 3mm thickness & Ø60mm solid bar is used. The footrests is made from Aluminum casting material, its sizes are 320 mm X 270 mm & 5 mm thickness. For support of footrest is 200mm X 250mm with 5mm thickness M.S. Plate and 50mm X 50mm CRC Square pipe with 2mm thickness is used. Closing Caps made from top quality FRP material which is of 2 mm thickness. The pins used are made up of Ø25 mm bright bar. The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). The handles used are of Rubber grip. High tensile steel with galvanized nut bolts are used for assembly. The bushes (Stopper) used to avoid the collusion made from Poly Urethin Plastic material of Ø 50 mm. The serclips used for assembly is of Ø25 mm. The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

SKY WALKER/ AREA: -1.72Mtr x 0.63Mtr.SAFE AREA: - 2.54Mtr x 1Mtr.Providing and fixing Sky Walker made from “B” class G.I. Pipe.The main frame pipe is Ø80mm made from “C” Class G.I. pipe.The outer ring of sky walker is Ø32mm made from “C” Class G.I. pipe.For connecting the handle frame to main pipe Ø60mm “C” Class G.I. pipe is used.The bottom support of M.S. round plate of Ø250 mm x 10mm thickness is welded atbottom.The leg movement frame is of 50 x 50mm x 2mm thick CRC square pipe.The handle frame is of Ø40mm made from “C” Class G.I. pipe.The foundation used for fixing is 80 x 40mm x 3mm thickness C-Channel.The footrests is made from Aluminum casting material, its sizes are 130 X 310 X5mm.Closing Caps made from top quality FRP material with 2 mm thickness & Plastic cap areused.The pins used are made up of Ø 25mm bright bar.The bearings used are “6205zz” & “6203zz” permanent lubricated sealed bearing ofreputed make (SKF/FAG).High tensile steel with galvanized nut bolts are used for assembly.The serclips used for assembly are of Ø25 mm.The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micronthickness.

LEG PRESS Area:- 0.40 x 1.77 Safe Area:- 1 x 2.38Mtr. Providing and fixing Leg Press made from “B”Class G.I.Pipe The center pipe is of Ø115mm made from “C” Class G.I. The bottom support of M.S Round plate of Ø250mm & 19 MM. thickness is welded The remaining outer frame of Ø40mm made from “C” class G.I pipe. The foundation used for fixing is consist of three equal item i.e Ø80mm made from “C” class G.I. pipe, M.S. Round plate of Ø250mm & 10mm thickness, 25 mm X 25mm x3mm M.S angle. To join the centre pipe &outer frame seamless pipe of Ø120 mm & 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 300 mm of thickness 3 mm & M.S. Plate of mm and Size 250 mm X 200 mm thickness 5. mm and Size 250 mm X 200 mm is used to support it. The footrests is made from Aluminum casting material, its sizes are 130 mm X 310 mm & 5 mm thickness. The frame of footrests consists of Ø32mm made from “C” class G.I. pipe Closing caps made from top quality FRP material which is of 2 mm thickness. The inner bushes is made from seamless pipe, its diameter is 60 mm & 5 mm thickness. The pins used in are made up of Ø25 mm hardened bright bar. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed make FAG/SKF). The handles used are of Rubber grip. High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm. The powder coat is done by Poly rethane & Epoxy powder with 60 to 70 micron thickness.

Bench Panel (POMMEL HORSE) • AREA: - 2.05Mtr x 0.6Mtr. • SAFE AREA: - 4Mtr x 1Mtr. • Providing and fixing Bench Panel made from “B” class G.I. Pipe. • The main frame of Ø80mm, Ø60mm made from “C” Class G.I. pipe,

and • The bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is of Ø32mm made from “C” Class G.I. pipe. • The foundation used for fixing is consists of three equal items i.e. Ø90mm made from “C” Class G.I. pipe, M.S. Round Plate of Ø250 mm & 10mm thickness & 25 mm X 25mm M.S. angle of 3 mm thickness. • Ø32mm “C” Class G.I. pipe is placed on the frame Ø60mm made from “C” Class G.I. pipe. 60 x 10m thickness flat is used for supporting for it. • Closing Caps made from top quality FRP material with 2 mm thickness. • High tensile steel with galvanized nut bolts are used for ssembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70micron thickness.

HANDLING CYCLE AREA – 1mtr 210mm x 610mm x 450mm :- Main frame 70mm x 70mm Made from “B” class G.I Pipe. :- Handling pipe – 1mtr 260mm 2(pis ) 40mm 12gage Made from “B” class G.I Pipe. :- Seat support Pipe- 650mm 1mtr 650mm 12 gage 50mm Made from “B” class G.I Pipe. :- Paidal support Pipe- 460mm (2pis ) 50mm x 50mm 12gage Made from “B” class G.I Pipe. :- Clamp- 80mm x 80mm Thickness 8mm :- Circle – 320mm (2 pis ) Thickness 8mm :- Paidal pipe – 150mm x 100mm Made from “B” class G.I Pipe. :- Seat – 280mm x 200mm galvanized 2mm :- The pins used are made up 25mm bright bar :- The bearings used are “6205zz” permanent Lubricated sealed bearing of reputed make (SKF/FAG) :- High tensile steel with galvanized nut bolts are used from assembly. :-The serclips used for assembly are of 25mm. :- The colour used from standard oil paints

Play Equipment Spiral Slide:- Providing and fabricating and erecting spiral slide with ISI mark G.I. Pipe the assembly constitutes of the following. (a) The sliding chute shall be made up of fiber reinforced plastic (FRP) type moulded one and shall be painted with attractive colours and shade, minimum joints shall be provided for FRP spiral slide. The design of spiral is such that the children would not fall down while sliding in rotation towards down slide. The FRP slide shall be of 6 mm thick and should be finished both side with specialty designed horizontal landing where the child is not going to got hurt. (b) Platform height 3.0mtr. of aluminum chequred plate 3 mm thick with railing shall be made up of FRP with safe railing having 20 NB GI pipe for grip, with a height of 500 mm as recommended in the international safety standards. (c) Central support pipe shall be made up of 75 NB G.I ISI mark pipe with suitable arrangement. (length 4.0 m) (d) Ladder, Railing and steps made up of 20 mm NB G.I. pipe with steps for ladder 12 Nos. (length 0.4 m) Platform support pipe shall be made of 40 mm NB G.I. pipe 2nos of (3.5 m per no) G.I. pipe with proper foundation arrangement. The sate play area shall be a minimum of 3.5mtrs x 2.8mtrs. the painting shall be of required quality and support pipe are embedded in C.C. (1:2:4) mix of size 0.45 x 0.45 x 0.50 m and one coat of anticorrosive paint over it two coats of oil painting of approved quality and shade etc. complete as per design and drawing. All pipes are G.I. ISI ‘B’ class.

Wave Slide ( FRP ( Fiber Reinforced Plastic) / Roto Molding ( LLDPE/HDPE) Rec. Age :- 4-12 year The area :- 4.8 m x 0.5 m Safe play area :- 5.8 m x 1.5 m Height :- 1.5 m This item consists of ISI marked structure. The attractive wave slide chute is made up of 4 mm thick fiber reinforced plastic materials. The structure comprises of 20 NB and 25 NB powder coated GI pipe. The center support is made in 80 NB powder coated GI pipe.:The ladder cum railing is made 20 NB and 25 NB GI pipes.The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet. The chute has its end such as it causes safe landing of the child.All pipes are ‘A’ class pipes. All Structure Are of Powder Coating All Work done as per general Raw Material Sheet Added Below.

Animal Merry Go Round - 4 Seater:- Rec.Age :- 3-12 yrs. The area :- 1.5 m dia Safe play area :- 2.

5 m dia The mainframe of the animal merry go round is made up of 25 NB & 40 NB GI pipes. The GI pipes are powder coated. The stand is made in 80 NB GI pipes. All pipes are ‘A’ class pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant.The animal seats are made out of molded plastic in rotational molding process (LLDP/HDPE) It accommodates 4 children at a time. All Structure are of Powder Coating All Work Done As Per General Raw Material Sheet Added Below.

Multi Seater See-Saw:- Rec.Age :- 3-10 yrs. The area :- 3m x 0.5 m Safe play area :- 4 m x 1.5 m The MS See-Saw comprises four FRP ( FIBER REINFORCED PLASTIC/ROTO MOLDING (LLDPE/HDPE) Seats The lever is consisted of 20 NB and 80 NB powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see-saw is made using 50 NB GI pipe All pipes are ‘A’ class pipes All Structure Are of Powder Coating All Work Done as per General Raw Material Sheet added Below.

SATELLITE SCRAMBLER :- Rec.Age :- 4-12yrs. The area :- 2.4 M X 2.4 M Safe play area :- 3.4 m x 3.4 m Height :- 3.4 M This item comprises top globular frame, ladder frame and support columm and steps. The pipes used in this item are 25 NB and 40 NB GI pipes.The top globe is fabricated from 25 NB GI pipes supported on a 40 NB vertical GI pipes. All pipes are ‘A’ class pipes. The structure is powder coated to avoid rusting and for esthetic look. The steps of the ladders are made from 15 NB GI pipes. The chain ladder is 7 mm Thick for climbing the scrambler All Structure Are of Powder Coating All Work Done as per General Raw Material Sheet added Below

DOUBLE BAR :- Rec.Age :- 6-14 yrs. The area :- 1.9 M X 1.5 M Safe play area :- 2.9 m x 2.5 m The double bar being from exercise range provides a structure for physical exercise to the children the complete structure is made out using 40 NB powder coated GI pipes. The spacer pipes used are of 25 NB GI pipes All pipes are ‘A’ class pipes. All Structure Are of Powder Coating All Work Done as per General Raw Material Sheet added Below

Simple Side (Galvanized iron Chute) :- Providing fabricating and erecting Simplex Side composed of 40 mm dia G.I. ISI mark 2 Nos. (3.00 m length per no) for supporting plant form, 20 mm dia G.I. Pipe for ladder slant 2 Nos. (3 m length per no) steps 11 nos. (0.40 m per no Railing 2 nos. (2.70 m per no) bracing 4 Nos. (0.20 m per no) and vertical 20 mm NB G.I. Pipe dia G.I. Pipe for hand rest at platform level 4Nos (0.45 m per No) 4 Nos. horizontal (0.50 m per no)and for side chute slant 2 Nos.(4.30 m per no) and for middle vertical support of side chute 2 nos. (1.30 m per no) and the end of chute vertical supports 4nos (0.9 m per nos) also M.S. angle 40 x40 mm x 5 mm as stiffeners below chute and along edges length wise (Total length 10.4mtr.) Railing and support pipe embedded in cement Concrete block (1:2:4 mix) of size 0.45 x0.45 x 0.45mtr and 18 Gauge Galvanize iron sheet for slide chute (4.30 m x 0.45 mtr.) and Aluminum chequred sheet 3 mm thick fixed on ISA 40 x 40 x 5 mm thick for platform size (0.50 m x 0.45 m) and one coat of anticorrosive paint and oer it two coat of oil painting of approved quality and shade etc. complete. As per detail design and drawing. All pipes are G.I. ‘B’ class ISI Mark.

Rain – Bow – Ladder :- Providing fabricating and creating Rain – Bow – Ladder composed of two semicircular 40 mm NB GI ISI mark pipe (length of one pipe 6.28 m) embedded in cement concrete block ()1:2:4 mix) of size 0.45 x 0.45 x 0.45 m and 20 mm NB GI ISI round pipe 19 nos. (0.50 m length per no) for steps at equal spacing and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per detail design and drawing. All pipes are G.I. ‘B’ class ISI mark.

Animal shape Dust Bin (FRP) :- Providing and fixing Penguin / Rabbit shape dust bin of size 2 feet diameter 3.5 feet height made out of animal shape Fiber Reinforcement Plastic structure of 5 mm thick in two colours well finished and smoothened with a door for opening on back side as per d

rawing and painting in attractive colour combination in synthetic enamels paint.