PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME KISHANGARH, BLOCK BUDHLADA, DISTT. MANSA

Item Wise Description :

Carriage of Earth, Surkhi, sand, Fly Ash, bajri, ballast, stone boulders, kankar and building rubbish, Earth. Carriage of material excluding initial lead of 5 Km (a) Phillaur Sand (Av. Lead 167 Km) 0 to 167 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (b) Ghaghar Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (c) Bajri Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (d) Filter Media (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR Item No. 6.6

Dismantling concrete or precast concrete (d) Cement concrete plain 1:2:4 CSR Item No. 8.6

Scraping cement plaster CSR Item No. 8.31 (c)

Cement concrete 1:8:16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.6 (b) (ii)

Cement Concrete 1:2:4 (a) With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.13 (a) (ii)

Reinforcement cement concrete M-30 Mechanical batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in super structure. CSR Item No. 10.22

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick Cement concrete 1:8:16 & 100mm sand filling using mechanical mixer for mixing of material. CSR Item No. 14.10

12.5 mm thick cement plaster 1:2 CSR Item No. 15.7

12.5mm thick cement plaster 1:4 CSR Item No. 15.9

Cement rendering on plaster 1mm thick CSR Item No. 15.48

Cement pointing 1:2 flush on flat brick flooring CSR Item No. 15.67

Applying pink primer on aluminum priming coat on wood work including prepration of surface knotting and stopping etc. CSR Item No. 16.16

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. CSR Item No. 16.17

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. CSR Item No. 17.10 (xvii)

Bolts and nuts of all sizes and length required CSR Item No. 18.15

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter (6kg/cm2 pressure). (xii) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2 (xii)

90 mm o/d (xiv) CSR Item No. 28.13 b) + 28.18 + 28.2 (xiv)

Providing, Stringing out, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS:7181, Class-B (ISI marked with the prior approval of Engineer-inCharge) and laying the same in trenches to correct alignment and gradients, jointed with nut bolts and rubber insertion fitted complete including all cartage. e) 200 mm i/d pipe line laid complete. CSR Item No. 28.21 (e)

Supplying and laying C.I. specials as per IS:1538 complete as desired by Engineer-inCharge conforming to ISI specifications. Note: If C.I specials of ISI Marked is used instead of specials confirming to ISI Specifications , than 10% extra on rates of this item will be paid. a) C.I. specials upto 300mm i/d. CSR Item No. 28.24 (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (d) 200mm i/d Sluice Valves CSR Item No. 28.27 (A) (d)

Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required. a) Connection with pipe line Upto 300mm i/d CSR Item No. 28.49 (a)

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below. a) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. CSR Item No. 28.51 (a)

Hand boring horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki methed. including excavation, stringing and jointing of pipe upto 160mm complete. CSR Item No. 28.71

Non Schedule Items Supplying and fixing 200mm i/d Galvanized iron sheet floating arm 5.20 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel. Complete in all respect. (NS)

Non Schedule Items Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 1380 LPM against a head of 7 & 35 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) Raw water BHP 7.50 ( Motor with Pump) Discharge 1380 LPM. Head 7 Mtr (NS)

Non Schedule Items Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 1380 LPM against a head of 7 & 35 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. Clear water BHP 17.50 ( Motor with Pump) Discharge 1380 LPM. Head 35 Mtr (NS)

Non Schedule Items Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 1380 LPM against a head of 7 & 35 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) Panel Board for Raw water motor (NS)

Non Schedule Items Providing, installing testing & commissioning of 2 No. electrically centrifugal driven pump set capable of delivering 1380 LPM against a head of 7 & 35 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. Panel Board for Clear water motor (NS)

Non Schedule Items Providing, installing, testing & Commissioning one no. Electronically actuated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Liters of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications. (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on Old pipe line (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on New pipe line (NS)

Non Schedule Items Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Repair of old Water Connection (NS)

Non Schedule Items Provision for connecting the proposed pipe with existing pipe line any size including cost of excavation, uPVC T/ Bend/ Elbow/ Socket/ pipe piece / D-joint etc. complete in all respect. (NS)

Non Schedule Items Painting of Sign Board (NS)

Credit of old material for floating arm (N.S. Rates) (-)

Credit of old Sluice Valve of size 200mm i/d (N.S. Rates) (-)

DEEPAK SINGLA CONTRACTOR