Special repair for House no. 3 in PWD Colony at Gurugram. (Recall)

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR 8.5b)

Dismantling Roofing demolishing mud phaska in tile terracing.(HSR 8.8g)

Scraping of cement plaster (HSR 8.32c)

Dismantling white or coloured glazed tiles(HSR 8.38)

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc(HSR 13.13)

12 mm thick cement plaster 1:6(HSR 15.7)

Providing & Fixing Vitrified Tiles 600mm x 600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO , (Double charged tiles shall be used (HSR-14.89). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing vitrified tiles of size 600mm x 600mm of approved make in skirting/dados laid including cutting as per drawing in any pattern as specified over base of 12mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO , (Double charged tiles shall be used (HSR-14.90). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.-

Providing & Fixing ceramic tiles/anti skid 400mm x 400mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used (HSR-14.91) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Chowkats of commercial hard wood such as hillock, champ, chikrassy, and chaplash, etc., (Non-coniferous timber other than teak conforming to I.S. specification no. 1003 kiln seasoned), of doors and windows including iron hold fasts,etc complete fixed in position, (HSR-17.12)

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in-charge). HSR 17.93 (a) - Note 1 under 17.18]. (ii) 30 mm thick. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock & Champ only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. [HSR 17.92 (i) - Note 1 under 17.18]

Supplying and fixing glass panes with Deodar wood moulding- 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane)(HSR 17.24c)

Providing & fixing over head cabinet with 19mm combinet board duly laminated (N.S)

Providing & fixing under counter cabinet with 19mm combinet board duly laminated (N.S)

Providing & fixing stainless steel gaskets of various sizes complete in all respect as per detail given below:- (i) Grain Trolley 17''x20''x12''

(ii) Plate 17''x20''x8''

(iii) Cutlery 17''x20''x4''

(iv) Multi Basket 17''x20''x8''

Providing & fixing channels complete in all respect. (N.S) (i) Channel 20''

Providing & fixing stainless steel handles and hinghes of ggod quality in drawers etc. complete in all respect (N.S) (i) Hinghes

(ii) Handles

(iii) Edge biding tape

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (A) Single trap symphonic W.C. Suite (i) Single Color. [HSR 30.5 (a) (i)].

PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; Size 560 mm x 450 mm with one no. tap(HSR 30.41 v)

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a)

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) 15 MM STOP COCK Stop cock male and female end(HSR 30.76a-i)

Providing and fixing 15 mm C.P brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) Two way(HSR 30.78b)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION C.P Brass 15 mm x 375 mm(HSR 30.82 b-ii)

Providing for laying, jointing, fixing and testing G.I. (Medium class "B" type of Tata & Jindal make) pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting threading. G.I. specials shall be of Make:- UNIK, TATA, ZOLOTO. (N.S)15mm I/d

Distempering with washable oil bound distemper (of approved manufacture) one coats on old distempered work.(HSR 16.59)Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work(HSR 16.60)Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)

Providing two coats of exterior acrylic emulsion paint 1st quality (HSR 16.79 b) Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)

Painting one coat with synthetic enamel Paint in all shades on old wood-work, or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint(HSR 16.7) Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)

Scraping white wash and colour wash(HSR 8.32a)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing (HSR 16.24) Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) Note:- In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H., & E.I. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Vijay Kumar

Sh. Yogesh Rao Govt Contractor

M/s Vaasu Traders