SPECIAL REPAIRS TO INTERNAL ROADS IN MCTE MHOW

Amount

M&L for preparation existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a primer/tack coat with using tetanic bituminous primer at 5 kg per 10 sqm and applying 30mm thick (consolidated Thickness ) premixed hot mix Asphaltic semidense concrete carpet using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix including rolling and consolidation to required gradient and camber all as specified and directed. Note :- (i) Laying shall be done by means of self propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing complete all as specified and directed. (ii) Mix shall be obtained from hot mix plant. (iii) Cost of testing charges, materials and transportations shall be inclusive in the unit rate and no extra payment shall be admissible on this account.

Material and labour for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour for marking lines, dashes, arrows, letters etc. not exceeding 15cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per Sqm area conforming to MOST & BIS specification, not less than 2.00mm thick of white/ golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e cleaning of surface by removing all dust, dirt, oil grease etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal from site upto 500m complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded as in coping, edging finish fair and even complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded as in foundation filling and mass concrete complete all as specified and directed.

M&L for 60 mm thick machine pressed precast interlocking paver block (glossy finished) any shape and size as approved by GE conforming to IS 15658-2006 of M-35 grade, with grey cement and pigment laid dry & jonts filled over and including 30mm thick fine sand cushioning complete all as specified and and directed.

M/s M S Sharma and Co.

Bharadwaj Builders

M/S Pawan Babulal

M/s ESS KAY Construction

MODI CORPORATION