Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.3 LAccepted-AOC GRAM DAHA PRAKHAND HUNTERGANJ | CHATRA | JHARKHAND | 1 | Accepted-AOC Lower bid | |
| 2 | 2₹24.3 L+₹425.20 (0.02%)Rejected-Finance SURESH COLONY KORRA HAZARIBAGH | HAZARIBAGH | JHARKHAND | 825301 | 2 | Rejected-Finance Higher bid |
Tender Value
₹24.5 L
EMD Value
₹50,000
Closing Date
29 Aug 2024, 3:00 pmClosed
Executive Engineer, BCD
Office of the Executive Engineer, Building Construction Department, Building Division,Hazaribag
Renovation of (DSP) Residence Building at Hazaribag for the year 2024-25
2024_BCD_91093_1
BCD/EE/HAZARIBAG/ 06/10 /2024-25
Open Tender
Civil Works
Item Rate
90 days
DSP Residence Building at Hazaribag
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹50,000
28 Nov 2024
23 Aug 2024
30 Aug 2024
23 Aug 2024
29 Aug 2024
23 Aug 2024
Amount
Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
Taking down C.A. Of G.C.I. Sheet in roofs with ridges including stacking the serviceable materials within 15M. Lead and disposal of unserviceable materials with all leads as per direction of E/I.
Taking down double layer naria tiles, carefully stacking properly on ground within 15M. Lead and disposal of debries with all leads complete as per direction of E/I.
Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Labour for relaying double layer naria tiles roof with old and new departmental tiles at all places including disposal of derbis with all leads all complete as per direction of E/I.
Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in roof members as pillers, plates, rafters, purlines. beams and type of beam with cost of nuts and bolts complete with cleats (with wooden check) fitting with screws
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of a
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered a
Providing P.C.C.M-200 in nominal mix of (1:1.5:3) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concreting in mixer and placing in position v
Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20m
Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid o
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building
Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge an --12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to
Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.
Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as p
Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Providing and fixing Chlorinated Polyvinyl hloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c 32 mm nominal outer dia Pipes
25 mm nominal outer dia Pipes
supplying and fixing G.I fitting all complate ELBOW
SOCKET
BENDS
CARRIAGE OF MATERIALS (A) Bricks with an avg. Lead of 8 K.M.(15.00KM)
(B) Sand with an avg. Lead of( 10 .00 K.M).
© Stone chips with an avg. Lead of( 15.00 K.M.)
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC modular GROUP -C
Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor
Circuit/submain wiring in PVC conduit:- 2x2.5 sq mm+1x2.5 sq mm earth wire
2x4 sq mm+1x4 sq mm earth wire
Supplying and fixing following way single pole nutral,sheet,MCB distribution board 12 Way,Double door
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series 6/32 amps,single pole, "B" SERIES
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker6/32 amps,SPN
S/F Modular boxes, base & covre plate:-following size/ modular G.I box along with modular base & cover plate for modular switches in recess etc, as required.
S/F ceiling rose:- Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
S/F Batten holder:-Supplying and fixing batten/angle holder including connection etc, as required.
S/F modular type switch /socket :- Supplying and fixing following modular type switch box/cover including connections but excluding modular plate etc as required 5/6 amps, one way switch
5/6 amps, 3 pin socket outlet
15/16 amps, one way switch
15/16 amp 6 pin socket outlet
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required
ITC ceiling fan:-Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required
S/F/F/ 1200 mm SWEEP CEILING FAN WITH REGULATOR
S/F/F 15/16W LED BULB
9" EXHAUST FAN
Add GST 18 %
Add L.Cess 1 %
AJIT KUMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .