REPAIRS TO FLOORING, PLUMBING, CEILING, ROOF SHEET AND OTHER B/R WORKS IN OTM ACCN AT APS AND NCC OTA UNDER AGE B/R-II KAMPTEE.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 4 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 6 above but dark shade vitrified tiles complete all as specified and directed.

All as per item No 6 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone aggreate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for 30mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform /shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as directed.

S&F marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble makrana white shade etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 24mm x 0.30mm, cross tee shall be 28mm x 24mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mmx 24mm x 0.30mm thick complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/GI/ Aluminium framework with screws complete all as specified and directed.

S&F in repairs 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws in ceiling complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

Dismantling of timber fillets unframed under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat conforming to Fe-290, (Gde-165) etc complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated sheet, in roofs, wall etc and fixed with ‘L’ or 'J' hooks or cranked bolts or self taping screws with washers complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges/ valley, fixed with and including self tapping screw all as per manufacturer instructions complete all as specified and directed.

Taking down existing water proofing treatment including screed bed and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 20mm thick screed bed in CM 1:6 and aluminium paint over membrane complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item No 36 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished fair and even complete all as specifed and directed.

M&L for preparing newly plastered walls surfaces and applying three coats white wash over wall surfaces complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:4) and finished fair and even complete all as specified and directed.

All as per item No 40 above but on ceiling complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primer over chalk whiting etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10 cm in width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of RCC in any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement shall be measured and paid separately) complete all as specified and directed.

M&L for mild steel TMT bars of 8mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs wall mounted vitreous china wash down water closet 'P' trap round of size 620x360x780mm along with soft close seat cover and twin flush (Aquafier EWC P Trap) white colour with all fitting including jointing mild steel CP or aluminimised hinging device complete all as specified and directed. Make:- Prayag cat No 4125 or equvalent of Hindware/Cera/Jaquar.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white, including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including S&F waste pipe complete all as specified and directed.

Supply only vitreous china pedestal for WHB, white complete all as specified and directed.

S&F wash basin oval type (56x41cm) complete all as specified and directed. (Make : Hindware, Johnson Peddar, Cera )

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, connections to flushing pipe complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib cock long body with flange 15mm dia brass chromium plated fancy type screwed for iron pipe or for brass ferrule including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7808 or equivalent.

S&F repairs pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F pillar cock swan neck 15mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7814 or equivalent.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair stop valves/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed, fancy type, chromium plated complete all as specified and directed.

S&F two way bib cock (half turn type), brass CP, crewed down, high pressure, screwed both ends for iron pipe or for unions including taking down existing one complete all as specified and directed. Make:- Prayag Cat No 7612 or equivalent.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed.

S&F in repairs urinal spreader of CP (Push type) any colour for fixing with 15mm dia pipe complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F grating doom with waste hole 125mm dia of chromium plated complete all as specified and directed.

S&F in repairs waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe for connection to GI tubing of 15mm bore complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom and cover, mild steel, chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make:- Prayag Cat Part No 551 or equivalent.

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

S&F as in repair corner sheet glass shelf assemble consisting of 5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag cat No BEA 44 or equivalent.

S&F towel rail brass chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. Make:- Prayag Cat No BA 40 or equivalent.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.28,255.00]

M/s M.G. Hargunani

DEESHA CONSTRUCTIONS

M/s T.S.JOHAR

M/s DS Khekde

M/s Rahul Traders

NORTH INDIA PEST CONTROL

M/s Jagdish Staioners and General Stores

Bidder Name

M/s T.S.JOHAR

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL